LINE 6 Stagesource L3M Active Monitor

StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.

The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

- 1000w RMS, 2000w peak,  power delivers clarity, punch and more than enough headroom for any - performance or practice space - Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds - with precise, full response across the entire frequency range without any artificial colouration - (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator - XLR output to link another Strike Amp 12 or send your performance to another input device - Lightweight and flexible tilt-back cabinet design that can also be pole-mounted - Contour EQ switch to control your sound - Ground-Lift switch eliminates unwanted noise


Specifications:

• Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
• Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
• High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
• Crossover Frequency: 2.0KHz
• Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
• Frequency Response: 53Hz – 20kHz (+3dB)
• Frequency Range: 46Hz – 22kHz (-10dB)
• Horn Coverage 90o horizontal x 60o vertical (nominal)
• Equalisation: Contour switch with low- and high-frequency +3dB boost

Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input

• Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
• Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
• Protection: Electronic clip, thermal & transducer overdrive
• Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
• Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
• Consumption: 800W
• Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille

Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg

The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

• • Main vocal stage monitor
• • Drum or keyboard monitor
• • Main PA in small venues

General Specs

• 800 Watt Peak, 400 Watt RMS digital bi-amplification
• 127 dB max spl
• 60° x 60° constant directivity horn
• 10" High power neodymium woofer, 2.5" voice coil
• 7 kapton dome, 1" exit, neodymium high frequency driver
• DSP processing, floor - fre field equalization, soft limiter and protection
• Combo xlr/jack input, xlr signal output

Acoustical Specs

• Frequency Response -3 dB:60Hz ÷ 20000 Hz
• Max SPL:127dB
• Horizontal coverage angle:60°
• Vertical coverage angle:60°
• Compression Driver:7 kapton dome, 1" exit, neodymium
• Woofer:10" neo high power woofer, 2.5" voice coil

Processor Section

• Limiter:Soft Limiter
• Controls:Freefield, floor

Amplifier Specifications

• Total power:800W PEAK
• High frequencies:200 W PEAK
• Low frequencies:600 W PEAK
• Total power:400W RMS
• High frequencies:100 W RMS
• Low frequencies:300 W RMS

Cabinet Specs

• Cabinet Material:Baltic Birch
• Handles:1 on side
• Pole Mount/Cap:yes
• Grille:steel

Size/Weight

• Height:324/12.7mm/inch
• Width:450/17.7mm/inch
• Depth:417/16.4mm/inch
• Net Weight:14,5/31.96kg/lbs

Active 300-Watt 2-Way Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter
High-power 300-Watt 2-way monitor speaker system for live and playback applications
Exceptional sound quality, wide frequency bandwidth and dynamic range
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Adjustable feedback filter and integrated limiter for ultimate system control and speaker protection
Integrated sound processor for ultimate system control and speaker protection
Ultra-low noise Mic/Line input with Volume control and Clip LED
Dedicated 3-band EQ for perfect sound shaping
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
High-resolution 1'' HF driver for exceptional high-frequency reproduction
Proprietary horn design for ultra-wide sound dispersion
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Integrated 35 mm pole socket for stand mounting and use as PA system
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

User's Manual

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.

• • Main vocal stage monitor
• • High-output drum or keyboard monitor
• • Sidefill monitor for small- to medium-scale applications
• • Rental companies
• • Professional musicians

General Specs

1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil

Acoustical Specs

Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil

Inputs/Outputs

Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female

Processor Section

Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter

Amplifier Specifications

Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS

Cabinet Specs

Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black

Size/Weight

Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs