From rock band to club DJ, StageSource™ L3s is a high-powered subwoofer designed to deliver best-in-class low-end performance - whatever the application.
Designed for the widest range of scenarios, Line 6 Smart Speaker modes allow you to configure the subwoofer output to deliver the perfect low-end performance at the touch of a button. Whether you need a huge punchy kick and bass for a live rhythm section, or deep sub-bass lows for use in a DJ rig, Smart Speaker modes make setup simple and deliver stunning sound in every application.
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
|Cabin Type: ||Wooden subwoofer |
|Amplifier: ||1,200‐watt |
|LF/MF, Woofer: ||2x12” |
|DSP Processor: ||Yes |
|Frequency Response: ||38 Hz to 910 Hz |
|Dimensions: ||419 mmx867 mmx591 mm |
|Weight: ||37.5 kg |
The PowerSub 312 active 12" subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.
The „X-Over" switch offers a choice of three discrete frequencies for the crossover between the subwoofer and the satellites: 70Hz, 100 Hz and 140 Hz, whilst the „Sub Level" control allows you to adjust the output of the PowerSub 312 within the range -8dB to +10dB.
Cabinet Powered 3-Channel Subwoofer Lo Amplifier Power RMS 800 W / 4 Ohms Mid-High Amplifier Power RMS 2 x 250 W / 4 Ohms SPL 2,83V/1m (1W/8 ohms) 92 dB Max. SPL 1m (calc. with peak power or measured 10% THD) 121 dB Voice coil tracking protection 70Hz/100Hz/140HZ Component Sub DND12S400 Connector model Speakon 1 x NL4 MPR for Sub 112 Extension Dimensions (WxHxD) mm 445 x 380 x 445 Net weight 22,5 kg Shipping weight 27 kg Enclosure material Birch plywood Finish 2-Comp. Paint Grille, Steel Powder coated Front b/w Acoustic Foam Handles 2
Lightweight portable powered speakers with legendary QSC amplifier power and reliability
1000 watt continuous Class D power module
Extensive DSP enhances system performance
Attractive and professional appearance
Rugged birch plywood enclosure
Comfortable ergonomic handles
Threaded pole socket with speaker pole included
The KSub is a dual-12" bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included).
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity.
DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.
Configuration 4th Order Bandpass
2 x 12" cone transducers
Frequency Response (-6 dB) 48 Hz - 134 Hz
Frequency Range (-10 dB) 44 Hz - 148 Hz
Maximum SPL1 130 dB peak
Power Output2 1000 W continuous Class D (2x500 W)
2000 W peak
Input Impedance (ohms) XLR / ¼“: 40k balanced / 20k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Material Painted birch plywood
Finish Black textured paint
Dimensions (HWD) 26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm
Weight (Net) 74 lb / 33.6 kg
Available Accessories KSub COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. The amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means our Class-D amps don't need massive heat sinks, and that means we can make them lighter. Plus B1200D's amplifier provides all the dynamic punch and fidelity you'd expect from a much larger, more expensive subwoofer.
The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we never cut corners, and we never just grab whatever happens to be on the shelf. We custom-design our own so they are the perfect match for both the amplifier and the application. We wind our own voice coils, process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components. The 12" long-excursion, low-frequency transducer was designed specifically for use in the EUROLIVE B1200D.
The B1200D features balanced XLR inputs and outputs, as well as balanced XLR Thru jacks for connecting additional enclosures. A Boost Frequency knob lets you boost any frequency between 45 Hz and 90 Hz. Then just flick the Boost switch to give your selected frequency a +10 dB boost. We've also provided a High Cut dial that controls the upper-corner frequency for the internal amplifier without affecting Thru A/B signals. A Level knob controls the input gain, and the Phase switch reverses the output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance including power, signal present and input overloads.
- High-performance 500-Watt powered subwoofer for PA applications
- Powerful 12'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
- Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact
- State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
- Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
- Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
- Variable High Cut control for perfect sound alignment
- Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
- Power, Signal and Clip LEDs for perfect monitoring
- Intelligent limiter for maximum sound performance and woofer protection
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Pole socket for mounting with commercial spacer poles
- Ergonomically shaped handles for easy transport
- Rugged steel grill for optimal speaker protection
- High-quality components and exceptionally rugged construction ensure long life
- Compact subwoofer system for installations
– 12″ double coil loudspeaker
– Right/Left inputs
– Filtered right/left outputs
– Wall mount accessory
The Arco 12 Sub incorporates the new 122S dual coil 12” loudspeaker for bass reproduction which provides low frequency output to 30 Hz. The dual voice coil configuration of the loudspeaker allows the cabinet to reproduce both the left and right channel subwoofer frequencies.
The Arco 12 Sub cabinet uses a band-pass configuration. The enclosure is manufactured in MDF and is available in a black paint finish. An optional mounting accessory permits wall mounting. The connector panel provides stereo inputs and high-pass filtered satellite outputs for either Arco 4 or Arco 24 systems.
The Arco 12 Sub is ideal for foreground music and music/paging systems requiring bass reinforcement. Possible applications include restaurants, retail outlets, bars, music cafes, fitness centers, or any other indoor application.
|Power Handling||170 W Cont. Program/Coil|
|Frequency Range (-10 dB)||30 Hz-180 Hz|
|Nominal Impedance||8 + 8 ohms|
|Sensitivity 1 W/1 m||106 dB SPL|
|Rated Peak SPL at 1 m||134 dB|
|Internal Crossover||In: 12dB/oct low pass 180 Hz|
Out: 6 dB/oct high-pass
|Dimensions (H x W x D)||36 x 59.2 x 28.5 cm|
14.2 x 23.3 x 11.2 in
|Weight||14 kg (30.8 lb)|
The PowerSub 212 is an extremly compact, high powered subwoofer with 2x 12" Woofers and 2x 200 W RMS / 2x 400 W max. output power amplifiers.
The integrated stereo crossover also supports the creation of active 3-way systems with Mono-Sub and active fullrange cabinets. The PowerSub 212 is the ideal partner for devices like the D 8A or D 11A and convinces with a deep bass foundation. The Frequency-range is 40 Hz - 130 Hz and the maximum SPL is 127 dB / 1m.
Small dimensions, a weight of only 39,5 kg and four smooth-running casters are provided for easier transport and safe handling.
Sub Transducers 2x EVS 12 SB
Rated Power RMS 2x 200 W
Max. Amplifier Output Capability 2x 400 W
Frequency Range (-10 dB) 40 Hz - 130 Hz
max. SPL / 1m 127 dB
Dimensions mm (W x H x D) 445 x 755 x 445
Weight 39,5 kg