| Content |
DX-1220, a digital DMX 12 channel modular dimmer pack.
This new sophisticated power pack is ideal and reliable for stage lighting,
disco night club, as well as Architectural lighting.
The Lite-Puter DX-1220 is just not another ordinary power pack, but has the
versatility to meet your needs plus more. The smoothest lighting effects in its
class as well as it's quick maintenance makes the DX-1220 an ideal power pack.
You will be pleased with not only the ability to change a module without turning off
all power, but also the ability to remove any amount of modules without removing
the whole unit. The DX-1220 has a variety of functions and testing keys to help the
user get maximum usage.
Features:
Auto detect the phase of AC power input.
Modular design: Easy for hardware maintenance and software upgrade.
Wisdom cooling control system: The dimmer will switch off automatically when over heat.
Power output limit: for protecting the loads.
Power frequency auto tracking: automatic adjustment for various power frequency to stabilize
the dimming output.
All channels or individual channel can be set as dimming or non-dim.
Can select square or linear dimmer curve.
The terminal board design on the rear panel can be used globally.
Self-Testing Function.
Pre-heat function to protect the loads (Pre-heat level 0-6.0%).
Structure:
Modular design: It is easy to replace, repair and change each independent module and
update software in DP-5 CPU interface. It is easy to replace, repair and change each
independent module and update software in DP-5 CPU interface.
25A magnetic circuit breaker on each P-27.
Four temperature-controlled fans.: When the internal temperature is over 37?, the fans
start to work, the fans start to work
1 minute and stop 1 minute in turn; over to 41?, the fans turn continuously; over 75?, all
output will be stopped until the temperature goes down 70?.
SSR : 40A/600V (75?) Itrms=40A Itsm=350A / 60HZ , 300A / 50HZ (25?) According with
UL 81734
Power input AC 100-240V, 45-63Hz,
1phase 2wire, 1phase 3wire, 3phase 3wire, 3phase 4wire.
Output Maximal Output is 20A each channel.(please refer to the user manual)
DMX signal input/ output DMX512
DMX signal connection XLR 5Pin
Analog signal input DC 0-10V
Analog signal channel 12 channels, Pin1-Pin12:Ch1-Ch12, Pin15: GND
Analog signal connection D-Type plug 15Pin(F)
Dimension 482(W) x 176(H) x 260(D) mm
Rack size 19“, 4U rack mountable
Weight 20 Kg
|
WD 1215 DMX
12 channels digital module dimmer. This dimmer has incorporated a 32 bit high power
microcomputer with aa time processing unit. Each channel can be programmed with the
adress, a control curve, the limitation, the preheat of the lamps and the loadcheck. 12
internal memories. Can be linked with oyher dimmers. Protections: Short circuit, power
failure memory. Alarm of over voltage. Temperature with switch off. Electronic fuse and
loadcheck. 10A per channel. 3 phase connection.
Dimensions: 483x178x436 mm. Weight: 31 Kgs. |
- Universal dimmer pack for professional use
- Can be operated 1-phase or 3-phase
- 6 x 20 A
- DMX-control or analogue control possible
- The DMX-starting address can be adjusted on the device
- Synchronisation of several DPX-620 possible via DMX
- Adjusting the lamp pre-heat
- All modes are displayed via LEDs and the display
- With automatic circuit breaker per channel
- Channel-outputs on the rearpanel via pole connectors
- Only for professional use
| Power supply: | 230-380 V AC, 50 Hz ~ | | Max. power output: | 27600 W | | Max. current: | 120 A | | Number of control channels: | 6 | | Max. output/channel: | 4600 W | | Max. current/channel: | 20 A | | Integrated programs: | 12 | | Output sockets: | via pole connectors | | Circuit breaker: | 6 x C 20 A | | Dimensions (WxDxH): | 420 x 482 x 95 mm | | | Rack installation with 2 U | | Minimum mounting depth: | 500 mm | | Weight: | 8 kg |
| 6-channel dimmer for LED calibrate minimum power 1w
Single phase Dimmer DMX – 512 High quality 6 channels 400watt each, special for LED sources adjustable from 3 watts. On the front panel it has 6 protection fuses of 2 A for each channel. On the back of the Dimmer, the connection is made with detachable terminals. You have the option of manual check to adjust your lighting percentage.
D46 DMX INSTRUCTIONS FOR USE
The dimmer is connected to a single-phase supply with a Shuko socket.
The dimmer works digitally and has 6 channels. The DMX connection is made on the front panel with a male XLR 3 PINS input (1 pins earth – 2 pins ( – ) and 3 pins (+ ), DMX continuity is made with XLR female with the same connections and you can connect DMX to terminals that are on the back of the dimmer.
The red led shows the voltage supply, the green led shows the DMX communication (DATA).
The display shows the number of DMX channels (001-512) channels. The up / down buttons raise or lower the number of channels (eg 001, 002, 003, ...).
The ( + /- ) manual check buttons are used to check the channels
The connection of the loads to the output is done with screw terminals. The indications are L (phase), N (neutral) and G (ground) and the power of each channel is 400 Watts.
After connecting the dimmer, open the ON-OFF switch. The red led lights up and the display shows an error (i.e. there is no communication). To start communication with the dimmer, connect the DMX in input plug to the console.. The display shows 001 and the DATA led lights up. Depending on what channel the display is showing, that channel of the console starts the dimmer.
If the dimmer shows 001 it means that the dimmer is connected to the console from channel 1-6. If it shows 002 it is connected to channels 2-7. If it shows 003 it is connected to channels 3-8 and so on.
If you want to connect more dimmers from the DMX OUT plug, connect your next dimmer or to the In-Out terminals on the back..
If any LED does not light up, it means that there is an error in the connection. If you want to check the dimmer channels (manual check), press the buttons (+ / –) for 3 seconds together. Then the display shows . By pressing the up button, you continuously raise the lighting percentage of the channel. Control the other channels in the same way by pressing the (+ / – ) buttons.
If you want to control all channels together in master position then the display should show the number .
To restore the dimmer to its original state after the manual check, press the (+ / – ) buttons at the same time. Minimum control load 3 watts. |
| Power supply: |
100-240 V AC, 50/60 Hz
9 V DC |
| Power consumption: |
1,8 W |
| IP classification: |
IP20 |
| Protection class: |
Protection class III |
| Power connection: |
Mains input via Coaxial power connector (M) mounting version power supply cord with AC adapter (provided)
Battery/battery pack possible |
| Battery: |
1 x 9.0 V E block (not included) |
| DMX channels: |
Output 6 |
| DMX output: |
3-pin XLR (F) mounting version |
| Housing color: |
Black |
| Housing design: |
Desktop console housing |
| Dimensions: |
Width: 17 cm
Depth: 15,5 cm
Height: 6 cm |
| Weight: |
960 g |
|
DX-626 is a sophisticated DMX 6 Channel dimming pack. Its C3 liner dimming curve
ensures the accuracy of dimming effects on each fader scale. Each channel provides
20A output and is equipped with a 25A high-speed magnetic breaker. DX-626 has a
thermo-controlled fan which will activates automatically when the temperature is over
35°C (95°F). It can keep the system?s temperature in a safe range and reduce dust
accumulation. The 6 dimming sliders on the control panel are convenient for testing.
In addition to DMX input, it also has analog 0 ? 10 V DC input.
Features:
6 channels, each 20A.
C3 liner dimming curve.
Automatically detect power frequency (50Hz/60Hz) in different area and stabilizes the
dimming output.
The thermo-controlled fan will be activated automatically when the temperature is over 35°C
(95°F), stop the output when over 75°C° (167°F) and restart output when below 65°C (149°F).
Self-testing function to test without a console.
Each channel has individual 0-6% preheat setting for protecting loads.
Each channel can be set as dimming or non-dimming.
Power supply 100?120V AC, 200?240V AC 50/60 Hz, 3?4w (1?3w optional)
Output Maximal 20A per channel, total 20A.
DMX signal input/ output DMX512
DMX signal connector XLR-5pin, XLR-3pin, 6p4c phone jack connector
Analog signal input 0 --- 10V DC 6 Channels ( 9 pin D-type, female )
Analog signal power input DC 0-10V
Analog signal connector D-Type Plug 9Pin(F)
Analog input channel 9 channels
Preheat setings 0 --- 6%
Dimension 19? 2U, 482(W) x 88(H) x 313(D) mm
Weight 8 Kg
|
Reviews
There are no reviews yet.