MACKIE CR8S-XBT, 200W, 8”, STUDIO SUBWOOFER + BLUETOOTH

Mackie CR8S-XBT

Add deep bass, Bluetooth capability, and convenient desktop volume control to your studio monitoring setup with the Mackie CR8S-XBT Creative Reference Series 8" multimedia subwoofer. It features an all-wood cabinet with a custom-tuned bass port and a 200W amplifier driving an 8" polypropylene coated woofer.

1/4" TRS and RCA input and output connectors ensure simple connectivity with your monitors and audio interface, mixer, or soundcard. Utilize the subwoofer\'s built-in Bluetooth receiver to wirelessly stream music from your smartphone, tablet, or computer.

The adjustable I/O levels, 40 to 180 Hz variable crossover, and switchable polarity let you optimize the CR8S-XBT\'s performance according to your preferences and the unique factors presented by your room and equipment. The included CRDV volume controller connects to the dedicated 1/4" CRDV input on the CR8S-XBT and provides separate level adjustments for the subwoofer and your monitors.

The CR8S-XBT features a download for ProTools | First and The Musician\'s Collection plug-in package including 23 high-quality plug-ins with BBD Delay, Eleven Lite, 304E EQ, and 304C Compressor.

• 8" Polypropylene Coated Woofer
• 200W of Amplification
• Built-In Bluetooth Receiver
• Includes Desktop Volume Controller
• All-Wood Cabinet
• Custom-Tuned Bass Port
• 1/4" TRS and RCA I/O Connectors
• Adjustable Input and Output Levels
• 40 to 180 Hz Variable Crossover
• Switchable Polarity

The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

Beef up your studio's low-end response

The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113dB.

A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.

• 200W Class-D Amplifier
• 113dB Peak Output
• 10" Speaker
• Slip Stream Bass Port
• Balanced XLR Input
• Extended Low Frequency Effects
• 3 Selectable Crossover Settings

Genelec 7271A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.

With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7271A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50 - 100 Hz.

12" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Frequency response curve

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

• 10-inch glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port
  

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert and ground-lift switch
  

• 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated, gravity-calibrated rubber feet for stable placement
  

• Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼" TRS outputs 
• XLR subwoofer output for connecting a second T10