Content |
•
|
2-way bi-amplified, optimized Active loudspeaker system
|
•
|
High-output precision titanium compression driver
|
•
|
Neodymium long-throw low frequency transducer with 3-inch voice coil
|
•
|
Servo Feedback controlled woofer for tight low-end punch
|
•
|
300W class-D, Fast Recovery LF amp / 100W HF amp
|
•
|
Ultra-wide, smooth dispersion via multi-cell horn aperture and HF waveguide
|
•
|
Built-in phase-accurate 24dB Linkwitz-Riley electronic crossover
|
•
|
Mackie Active Electronic time alignment, phase correction and EQ for studio quality sound
|
•
|
Mic/line input and pass-thru connector
|
•
|
Lightweight for ultimate portability (40lbs)
|
•
|
Flyable, Pole Mountable, Floor Wedge-able
|
|
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 60 constant directivity horn
12" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 12" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 637/25 mm/inch
Width: 384/15.11 mm/inch
Depth: 363/14.2 mm/inch
Net Weight: 17.2/37.91 kg/lbs
|
The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.
Specifications LD Block X 12" Topteil Active: - Model Name: LDATOP12
- Type: Bassreflex
- Components:
- Woofer: 12" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B (Bi-Amp)
- Dispersion: 60° x 40°
- Power (RMS): 350 W + 100 W
- Frequency Range: 80 Hz - 20 kHz
- SPL (1 W/ 1 m): 101 dB
- Max SPL: 128 dB
- Protection: Limiter, Thermal, DC, Short circuit, HF
- Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
- Indicators: Power, Limiter, Signal, Protect
- Connectors:
- Input: Line: XLR + Jack 6,3mm (Combo)
- Output: Line: XLR
- Power Supply: Transformer
- Cabinet Material: 15 mm Plywood
- Cabinet Surface: Painting
- Dimensions (W x H x D): 450 x 500 x 520 mm
- Features: Ergonomic milled handles
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
|
A versatile 12" powered speaker made from heavy duty polypropylene housing with a high power 12" woofer and 1.35" compression driver. Suitable for mobile DJ's, hire companies, installations, aerobics classes and as a monitor for solo singers and bands. A robust, well designed cabinet with a good punch and crystal clear high frequency response. Simple controls have been used on the rear, balanced mic input on XLR OR JACK, a balanced line input on XLR or unbalanced on RCA & a link output to similar or active subwoofers. A strong lifting handle to help mount onto a 35mm speaker pole and the option of a padded bag for extra protection that can be purchased separately.
SPECIFICATION
Power: 200 Watts RMS
Response: 45-20000Hz
Dimensions: 588 x 431 x 310mm
Weight: 17Kg
|
The AWC129 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types. Features : - Highly weather-resistant IP56 rating - Consistent 90° x 90° broadband pattern control - Components: ? 300 mm (12 in) woofer with Kevlar-reinforced cone and 75 mm (3 in) voice coil. ? 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm. - Extraordinary clarity for speech, with extended frequency response for music. - Advanced high-slope crossover network for constant coverage and smooth, natural midrange. - 400 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability. - High-power passive crossover network. - Overload protection - 55 Hz ? 20 kHz frequency response. - 200 Watt 70V/100V multi-tap (built-in transformer) direct 8Ω low-impedance. |
Reviews
There are no reviews yet.