Content |
1,600 Watts of Gut-thumping Bass in a Compact Unit!
When you want thumping bass, the powerful Mackie SRM1850 powered subwoofer gives you much more than you'd expect from its compact size. The SRM1850 delivers 1,600 watts of huge-sounding bass through a custom-designed 18" woofer. It's easy to dial in great sound on the fly because the SRM1850 has presets specifically for use with Mackie SRM series loudspeakers. But with a variable digital crossover, it's easy to match with virtually any system too. For a powerful and portable bass reinforcement solution, the Mackie SRM1850 powered subwoofer will exceed your expectations.
Mackie SRM1850 Powered Subwoofer at a Glance:
- A flexible but easy-to-use subwoofer
- Smart DSP enhances your sound and saves you time
A flexible but easy-to-use subwoofer
If you play different rooms of different sizes, you'll love the flexibility of the Mackie SRM1850. And no matter what your system looks like on any given night, the SRM1850 is easy to set up. If you're using it to reinforce Mackie SRM loudspeakers, you'll find presets to match the SRM1850 to the specific speakers you're using (no tweaking required). With other speakers, the variable crossover makes it easy to fit the SRM1850 into the mix. And because it has dual full-range outputs in addition to dual highpassed outputs, you can integrate the SRM1850 into virtually any PA system.
Smart DSP enhances your sound and saves you time
The Mackie SRM1850 powered subwoofer is smart. It has built-in Smart Protect DSP to protect the amp/drivers from signal clipping and crossover presets for use with Mackie's SRM series speakers. These built-in options make setting up the SRM1850 a breeze at any venue. The SRM1850's rugged all-wood, internally braced cabinet uses a tough 18-gauge steel grille to protect its speaker from damage.
Mackie SRM1850 Powered Subwoofer Features:- 1,600W, 18" powered subwoofer with amazingly high size/output ratio
- 18" LF woofer for rich, solid low-frequency reinforcement
- Smart Protect DSP protects amp/driver from signal overloads
- 2 full-range outputs allow you to easily connect side-fill speakers
- 2 highpassed outputs for connecting to DLM Series loudspeakers
- Built-in crossover presets specifically for Mackie SRM series loudspeakers
- Pole mount allows you to attach a speaker pole for main speaker
- Stackable for easy storage/transport
- Compact design is highly portable
The Mackie SRM1850 delivers 1,600 watts of earth-shattering bass in a compact package!
Tech Specs Powered/Unpowered | Powered | LF Driver Size | 18“ | Enclosure Material | All-wood design | Mounting Options | Floor Only | Inputs | 2 x XLR | Outputs | 2 x XLR (high range), 2 x XLR (full range) | Height | 24.8“ | Width | 28“ | Depth | 29.6“ | Weight | 74 lbs. |
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via three presets, sub/top system-match, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 132 dB peak SPL utilizing ultraefficient, high-sensitivity transducer designed and engineered by EV.
- Ideal for portable and installed applications. Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
ELX200-18SP features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 132 dB SPL utilizing transducers designed and engineered by EV (18-inch EVS-18L woofer). Powered subwoofer models allow easy setup via three presets (Music, Live, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall
settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure. ELX200 powered models are ideal for portable and installed applications, with lightweight and compact 15-mm wood enclosures, integrated M20 threaded pole polemount plate, and two-handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
Available Color |
Black |
Connector Type |
(2) XLR/TRS combo jacks and (2) XLR link outputs |
Depth |
574mm (22.6“) |
Specifications |
Enclosure Material |
15 mm plywood with EVCoat |
Family |
ELX200 |
Frequency Range (-10 dB) |
40 Hz – 145 Hz |
Frequency Response (-3 dB) |
47 Hz – 105Hz |
Grille |
18 AWG steel with powdercoat |
Height |
600mm (23.6“) |
LF Transducer |
EVS-18L 457 mm (18 in) |
Low Pass Frequency |
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz |
Max. SPL/1m (calc) |
132dB |
Power Consumption |
100 - 240 V~, 50 - 60 Hz, 1.8A |
Power Rating |
1200W |
Powered or Passive |
Powered |
Shipping Weight |
33.1kg (73 lbs) |
Speaker Type |
Subwoofer |
Weight Net |
29kg (63.9 lbs) |
Width |
507mm (20“) |
Woofer Size |
18inch |
|
- 2200 W
- 135 dB max SPL
- 35 Hz - 120 Hz frequency response
- 18" Woofer, 4.0" v.c.
- Total Power: 2200 W Peak, 1100 W RMS
- Selectable gain, X-over and delay
- Birch tour grade cabinet
- Stereo XLR input, Stereo XLR signal output
|
SPECIFICATIONS
Configuration 18" subwoofer
Transducer
18" cone transducer
Frequency Response (-6 dB) 38 Hz - 124 Hz
Frequency Range (-10 dB) 34 Hz - 143 Hz
Maximum SPL1 135 dB peak
Amplifiers
Power Output2 1000 W Class D continuous
2000 W peak
Input Impedance (ohms) XLR / ¼“: 38k balanced / 19k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 20.1" x 23.4" x 29.9" with casters
510 mm x 595 mm x 761 mm with casters
Weight (Net) 88 lb (40 kg)
Available Accessories KW181 COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
| User's manualLD Systems STINGER SUB 18 A G3
Active 18" bass-reflex PA subwoofer
STINGER SUB 18 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 18 A G3 is powered by high efficiency Class D amplification with a giant 800 watts RMS output. It drives a custom designed 18” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 18 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 18 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
- Active 18” bass reflex PA subwoofer
- High-efficiency 800 watts RMS digital power stage and 135 dB max. SPL
- 18” custom design woofer for extended low end down to 35 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
18 "
Woofer Size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
RMS
800 W
Peak power
1600 W
Frequency response
35 - 200 Hz
Max. SPL (peak)
135 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
677 mm
Height
547 mm
Depth
740 mm
Weight
42,6 kg
|
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.
- Application: Subwoofer
- Output Power: 600 Watt
- Built-in stereo X-over
- Very punchy High-power Subwoofer for Bands and DJʼs
Model | PR:O 18 Sub A | Title | PREMIUM PR:O | Product Class | Active Systems | Frequency response +/- 3 dB | 48 Hz – Xover | Frequency response -10 dB | 38 Hz – Xover | Maximum SPL, @ 10% THD | 125 dB | Connections | 2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced | LF Speaker | 1x18“ | X-Over | 75 Hz – 150 HZ, switchable | Subsonic filter | 35 Hz | Peak limiter | yes | RMS-Soundlimiter | no | Amplifier | 600 W Class D – 4 ohms | Pole mount | M20 threaded base plate | Handles | 2, integrated | Enclosure | MDF | Grille | metal grille with acoustic foam | Finish | acrylic painture, black | Dimensions (WxHxD) | 53 cm x 61 cm x 64 cm | Weight | 39,8kg / 87.8 lbs. |
|
Reviews
There are no reviews yet.