Content |
Sleek. Portable. Powerful. Today\'s performers demand greater performance than ever before from portable PA systems. Mackie has risen to that challenge and created the SRM215 V-Class Loudspeaker. This 2,000-watt portable PA fits easily on your front seat and loads into the venue in just one trip. Complete with a 15" LF driver and 1.4" Sym-X Horn HF driver, the SRM V-Class Loudspeaker delivers impressive SPLs with tons of headroom for full and accurate articulation. Simply put, this sleek and stylish loudspeaker was designed to be the loudest and best-sounding speaker in Mackie\'s lineup. It\'s equipped with Advanced Impulse DSP and Intelligent Bass Management that create an unbelievably expansive sweet spot. This speaker is completed by a 4-channel digital mixer with in-app control and Bluetooth streaming capabilities. Additionally, the dual-angled cabinet design allows it to be used as a high-performance floor monitor. So, however you use it, the Mackie SRM215 V-Class Powered Speaker will deliver consistent and clear sound every time. Robust LF driver and custom Sym-X Horn HF driver combine for incredible performance The Mackie SRM V-Class Loudspeaker may pump out 2,000 watts of reliable Class D power, but the secret to its great sound is in the drivers. The SRM215 is loaded with a 15" woofer and a custom polymer tweeter. Both drivers have high-performance transducers and oversized magnets that transmit your audio with unmatched accuracy. For optimal efficiency, the horn-loading frequency is set below the tweeter\'s low-frequency capability. You\'ll enjoy the symmetrical, flat response at the crossover point for smooth transitions. Simply put, the Mackie SRM V-Class Loudspeaker is versatile enough to handle any application you can imagine. Tech Specs - Powered: Yes
- Power Configuration: Single Amp
- Channels: 4-channel mixer
- LF Driver Size: 15" woofer
- HF Driver Size: 1.4" Sym-X Horn
- Total Power: 2000W Class D
- Bluetooth: Yes
- Wireless: Bluetooth
- Frequency Response: 40Hz-20kHz
- Maximum Peak SPL: 136 dB SPL @ 1m
- Horizontal Coverage Angle: 90°
- Vertical Coverage Angle: 60°
- Signal Processing: Advanced Impulse DSP
- Software: SRM Connect App
- Enclosure Material: Molded Plastic
- Mounting Options: Pole, Floor Wedge, Fly
- Height: 28.8"
- Width: 15.4"
- Depth: 17.6"
|
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
|
SPECIFICATIONS
| MODEL | TITAN 15 ACTIVE | GENERAL INFO |
| System type | Active 15" 2-way Bi-Amplified | Frequency response +/- 3db | 50-20kHz | HF SECTION |
| Hf type | Titanium Compression Driver | Horn dispersion (H x V) | 90° x 60° | Hf exit size mm / inches | 25mm / 1“ | PHYSICAL FEATURES |
| Enclosure Material | Injection Moulded Polypropylene | Enclosure Colour | Grey or White or Black | Size (mm/inches) | 381mm / 15“ | IN / OUT PANEL (speaker Level) |
| Input connector | XLR - 1/ 4" Combo jack | AMPLIFIER POWER |
| Power On Protection | Power switch on / off mute | Thermal Protection | Amplifier shutdown, auto reset | Low Line Voltage Shut Down | 60% Nominal line voltage | Driver Protection | Independent LF and HF limiters | DC Protection | Yes | Short Protection | Yes | Controls | High (±10dB) 10kHz Shelving | Dimensions (HxWxD) |
| mm | 708.3mm x 477.8mm x 401.77mm | inches | 27.9" x 18.8" x 15.8“ | Microphone / Transmitter |
| Maximum Input Level | +22dBu | Impedance | 4 Ω | MIXER MODEL |
| INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | Clip Limiter | Turns on approx 350W output | Limiter Indicator | Red LED | Power Indicator | Red LED | AC Power details |
| Power Supply | High Efficiency Switching Mode Power Supply | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | Power On Indicator | LED | Rigging / Bracket / | 10 M8 threaded inserts including 4 | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | Line Output |
| Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | Input A - type | Switchable balanced mic or line level input | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | Maximum Input Level | +22dBu | Input Connector | XLR - 1/ 4" Combo jack | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | Input B - type | Line level input | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | Maximum Input Level | +22dBu | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | Bass Response Optimizer |
| (“BRO“™) circuit | +5dB at 60Hz | Subsonic Filter | 30Hz, Second-order filter | Amplifiers |
| Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | Electronic Crossover | 24dB/octave Linkwitz-Riley | Crossover Frequency | 1.8kHz | Controls | High (±10dB) 10kHz Shelving | Equalization | Low (±10dB) 100Hz Shelving | DIMENSIONS & WEIGHT |
| Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
|
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design Specification | Detail | Powered | Yes | Power Configuration | Bi-amped | LF Driver Size | 15“ | LF Driver Power Amp | 1,000W (peak) Class-D | HF Driver Size | 1“ | HF Driver Power Amp | 100W (peak) Class-D | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | Maximum Peak SPL | 130 dB | Horizontal Coverage Angle | 90 degrees | Vertical Coverage Angle | 60 degrees | Enclosure Material | Polypropylene | Mounting Options | Pole, Floor Wedge, Fly | Inputs | 2 x XLR/TRS combo | Outputs | 1 x XLR | Height | 28.3“ | Width | 18“ | Depth | 14.5“ | Weight | 60.9 lbs. | Manufacturer Part Number | M15UL |
|
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
|
Product Features: - High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- High-performance Bluetooth* A2DP technology to stream audio wirelessly from any Bluetooth-compatible device
- “Wireless-ready" for high-quality BEHRINGER digital wireless microphone system (not included)
- 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
- Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning:
- - Stand mounting with 35 mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
User's Manual
| Features: EVS-18K 18-inch Woofer 123 dB max. SPL 400 W Class-D Amplifier Integrated DSP Cabinet Powered subwoofer 1 x 18“, vented design Maximum Amplifier Output Capability, IHF-A 400 W Amplifier Power RMS 305 W Max. SPL 1m / calc. 123 dB Frequency Range (-10 dB) 40 Hz to 130 Hz Nominal Coverage Angle Omnidirectional Audio Input XLR and 1/4" TRS combination Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 100 Hz Product Dimensions (W x H x D) 661 x 507 x 574 mm Net Weight 31.3 kg Optional Accessories --- SH-118A, Dust Cover F01U270397
User's Manual |
Reviews
There are no reviews yet.