MARK BASS Litlle Mark 250 Black Bass Head 250 Watts

 The Black Line version of Little Mark 250 offers the same features as the standard Little Mark 250. The Black Line products are made using the same cutting-edge technology, high-quality components and the same quality control standards that apply to all of our products.The Little Mark 250 Black Line is a smart, inexpensive choice for those who donʼt need the full power of a 500W head. Itʼs great for practicing, rehearsing, and small gigs.    

• INPUT: impedance 500 Kohm, max. voltage 15 Vpp
• BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
• EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

• GAIN: -60 dB to +23 dB range
• MASTER VOLUME  
• LINE OUT LEVEL 
• GROUND LIFT (switch on rear panel)
• PRE/POST EQ (switch on rear panel)

• LOW: center frequency: 40 Hz; level: ±16 dB
• LOW MID: center frequency: 360 Hz, level: ±16 dB
• HIGH MID: center frequency: 800 Hz, level: ±16 dB
• HIGH: center frequency: 10 kHz, level: ±16 dB
• VPF (Variable Pre-shape Filter) center frequency 380 Hz 
• VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz 

• LINE OUT: balanced XLR, max. voltage 20 Vpp
• EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
• TUNER OUT: unbalanced, max. voltage 2 Vpp
• SPEAKER OUT: speakon/1/4" combo, 1/4“ 

• WEIGHT: 5.07 lbs / 2.3 kg
• WIDTH: 10.87 in. / 27.6 cm
• DEPTH: 9.84 in. / 2.5 cm
• HEIGHT: 3.27 in. / 8.3 cm
• OUTPUT POWER: 250W RMS @ 4 ohms /  150W RMS @ 8 ohm
• POWER REQUIREMENT: 100/120V; 230V; 240V - 50/60Hz

Marshall VBC810 Bass Amplifier Cabinet for use with VBA400

The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.

It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.

Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.

Speaker Configuration 8x10"
Power Handling (RMS) 640W
Impedance 4 Ohms
Weight - 73 kgs
Dimensions (mm) 675x1265x410

For the bassist, VOX introduces the newest member of the Path­finder family: the Pathfinder 10 Bass.

Guitarists have long been familiar with these best-selling, portable, solid-state combo amps, and now bass players can experience a taste of the legendary VOX brand with the Pathfinder Bass 10. From the diamond grille cloth and basket-weave vinyl leather to the vintage chicken-head knobs, the Pathfinder Bass 10 loudly proclaims its VOX pedigree. This dual- speaker, deep-thumping, portable amp is ideal for the on-the-go bass player. In addition to Treble and Bass tone-shaping controls, the Bright switch offers an edgy boost to the upper harmonics. Turning up the Drive control provides a warm, bass distortion that adds character and vitality to the tone. The Pathfinder Bass 10 pumps out 10 watts into a pair of 5" VOX bulldog speakers. A headphone/line output jack is also provided for silent practice and recording.

• Output Power: 10 Watts RMS
• Speaker: VOX Bulldog 5" x 2 (4 ohms)
• Input: INPUT jack
• Output: PHONES/LINEOUT jack
• Controls: DRIVE, TREBLE, BASS, VOLUME, BRIGHT switch
• Dimensions (W x D x H): 380 x 170 x 277mm (including projections) / 14.98 x 6.69 x 10.91 inches
• Weight: 5.6kg / 12.32 lbs

The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P combo just might be our most versatile combo! It's perfect for any situation. The angled cabinet design allows the unit to be used either as a floor monitor or in standard vertical position. The built-in VLE and VPF filters help create a warm and natural sound. 

The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. Thatʼs where the SVT-3PRO comes in. Thereʼs a reason this amp is a best seller—it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.  
Itʼs all about tone. The SVT-3PROʼs Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices” for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if thatʼs not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel” for your show-stopping bass solo.

The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.