Content | Marshall Vintage Reissues Sound Exactly Like the Original!
The Marshall 1959SLP 100 Watt Super Lead Plexiglass head of the late '60s/early '70s, as used by countless classic bands, re-issued in all its glory. The 1959SLP has been in production since the late sixties but with various electrical and cosmetic changes happening along the way. The models produced in the late 1960s/early 1970s however, were the ones that most tone gurus regarded as the finest examples.
After much searching Marshall managed to track down two amps from this period, packed with all the tone and rich velvet overdrive. They gave these two tone monsters to their guitar-playing R&D experts and left them to create a re-issue that was so authentic that no one could tell the difference. They succeeded and the 1959SLP re-issue came to life!
Marshall 1987XL Features:
- Part of the Marshall Vintage collection
- Mix two channels together at once for a totally unique sound
- New series effects loop feature
- Vintage Marshall through and through
Marshall Vintage Series
The main characteristic that these amps share is their simplicity of operation and superb natural valve tone. Achieving the beautifully organic and vibrant overdrive which is their trademark, can only be done in one way - crank 'em up! The result is pure, majestic tone uncluttered by unnecessary circuitry. With solos this produces a big, round, warm, sustain, full of classic character. With chord work you get a bark and percussive attack with a natural sounding break up, which allows each note to ring out in a glorious musical crunch.
Unique Sounds
With the Marshall 1959SLP, you can mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility!
Uncompromised Tone - Even Through the Effects Loop
The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.
Vintage Marshall Appointments
The 1959SLP has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.
Marshall 1959SLP Features:
- Output: 100-Watt
- Preamp Valves: 3 x ECC83
- Power Amp Valves: 4 x EL34
- 3-band EQ
- Presence
- Dimensions: 29.5" x 12.2" x 8“
- Weight: 45lb
|
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
|
The JVM Series 100-watt, valve-driven power stage is built on the classic design responsible for the legendary Marshall roar found in the JCM800, 2203 and "plexi" Super Lead amplifiers -- a timeless foundation for countless classic rock and metal guitar tones for over 4 decades. Featuring a quartet of EL34 valves, this peerless design has been expertly crafted to compliment the extraorinary wealth of tones found in the JVM.
Technical Info
Type: Head
Output (RMS): 100 watts
Channels: 4
Modes per Channel: 3
Independent Gain and Volume (per Ch): Yes
Independent Tone Network (per Ch): Yes
Independent Reverb Level (per Ch): Yes
Dual Programming Master Volumes: Yes
Silent Recording: Yes
Emulated Line Out XLR: Yes
Series FX Loop: Yes
Programmable Parallel/Series FX Loop: Yes
MIDI Presets: 128
Pre-Amp Valves: 4XECC83
Power Amp Valves: 1X ECC83, 4XEL34
6-way Programmable Footcontroller (Supplied) PEDL-00044
Dimensions (mm): 750 x 310 x 215
Weight (KG): 22
Speakers: No
|
Marshall 50 Watt and 100 Watt, EL34 driven, valve power stages are, in the minds of many, the 'industry standard'. As soon as you hear Marshalls 50 Watt + 50 Watt, EL34 50/50 and the 100 Watt + 100 Watt, EL34 100/100 valve power amps, you will immediately understand why. Both of these eye catching units are packed with Marshall valve tone. Just like expensive hi-fi amps, both the EL34 50/50 and EL34 100/100 are Dual MonoBloc amplifiers - meaning that each side (channel) of the stereo amplifier operates as a completely independant unit. Each channel features its own Gain and Presence controls and our highly specialised 'True Differential Inverter' circuitry, ensures that the maximum integrity and pureness of their valve tone is maintained. Each channel also boasts a remotely switchable 'Voice' switch which takes you from 'traditional' (Voice A) to 'modern'(Voice B) and will allow you to cut through any mix, The Marshall EL34 50/50 and Marshall EL34 100/100 - professional, all-valve power amps that sound as good as they look!
|
100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.
Features - Power rating: 100W
- Preamp: Digital Natural Harmonic Technology
- Power amp tubes: 4 x EL34
- Preamp topologies: 16
- Modulation effects: Chorus, Phaser, Flanger, Tremolo
- Delay effects: Hi-Fi Analog, Tape, Multi
- Reverb: Independent custom voiced
- Midi Control: Midi in, Midi Thru
- Stompware controller: supplied
- Emulated line out: XLR
- Headphone out: 1/4" jack
- Line in: 1/4" jack
- Preamp: 1/4" jack
- Effects loop: Serial / Parallel -10dBV / +4dB with mix control
- Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
|
Reviews
There are no reviews yet.