| Content |
Marshall 2245-01 30W Guitar Amplifier
When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.
| Model Name | JTM45 (2245) | | Series | Vintage Reissue | | Tubes | 3 ECC83 (Preamp), 2 5881 (Power Amp) | | Output | 30 Watts | | OHMS | 16 | | Speakers | n/a | | Effects | n/a | | Covering | Black Vinyl | | Footswitch | n/a | | Dimensions | 660x260x205mm | | Weight | 14.6kg |
|
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
| The first high gain amp in the Terror series, the Dark Terror is a true master of saturated distortion, making it an ideal match for Hard Rock players looking for signature Orange ʽchugʼ in a portable package. Featuring the same 15/7 Watt output section as the Tiny Terror, plus the addition of our low impedance, valve buffered effects loop, the key to the amp its high gain preamp section and our exclusive Shape control.
The Shape, which first appeared on our Thunderverb Series, takes your sound from scooped, chunky modern rhythm tones in the fully clockwise position, to a more classic voicing (anticlockwise) with boosted mids and smooth highs, and everywhere in-between. This makes the amp much more versatile than its single channel, three knob layout (and black chassis!) might suggest. The preamp features four stages of gain, becoming increasingly aggressive as you turn the Gain control, reaching truly insane levels of drive. Ignore the clean and crunch tones at your peril, though. There are some tasty Blues tones to be had here! | Palmer EINS - Amazingly versatile!
Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.
The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.
- 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
- 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
- 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
- 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.
- Type: head
- technology: Tube
- class: A
- power: 1 W
- Inputs: 1
- input connectors: 6.3 mm Jack
- Input impedance: 1 M ohm
- outputs: 4
- output connectors: 6.3 mm Jack
- output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
- Channels: 1
- Indicators: Power
- controls: Level, Tone
- FX loop: no
- Power supply: 230 VAC
- Power consumption: 10 W
- preamp tubes: ECC83
- power amp tubes: ECC82
- rectifier: solid state
- cabinet material: sheet steel
- Cabinet / Housing surface: powder coated / anodized
- width: 206 mm
- depth: 128 mm
- height: 108 mm
|
BUGERA captures the stunning sound of the 1960s with the V55, a combo whose modern touches put a wide palette of vintage tones at your fingertips. With a proud pair of 6L6 power tubes in the output stage, the V55 bathes your guitar in clean California sunshine.
Its 2-channel preamp takes you everywhere from warm blues to garage-shattering crunch. A heavy-duty footswitch (included) lets you switch between channels remotely. Choose triode mode for an urgent, aggressive tonal edge, or pentode mode for clean and loud sound. A dose of built-in reverb provides the finishing touch. V55's Impedance switch (4, 8 and 16 ohms) makes it compatible with virtually any speaker cabinet. A custom-designed, handmade 12" BUGERA speaker brings this amp's vintage voice home in style.
Also available in a head version, the V55HD is ideally suited for use with the 212V-BK speaker cabinet.
Rock on with the way-out sound of yesterday - the BUGERA V55.
Features- Hand-built 55-Watt guitar head driven by 2 x 6L6 tubes
- Way cool vintage look and feel
- Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 tubes-everything from purring blues to mind-blowing crunch
- Integrated high-class reverb with dedicated Reverb control
- Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
- Normal and Bright inputs for ultimate sound character to perfectly match your guitar
- Multi-gain stage Lead channel with Pre Gain, Post Gain and Master controls
- Amazing Mode switch to select between Triode or Pentode operation
- Heavy-duty footswitch for Channel and Reverb function included
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
Marshall 1987X-01 50W Guitar Amplifier
Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.
Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.
The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.
- Output: 50 Watts
- Pre-amp Tubes: 3 x ECC83
- Power Amp Tubes: 2 x EL34
- EQ: 3-Band
- Presence Control
|
Reviews
There are no reviews yet.