Content | MASTER AUDIO – CW400/8
100 mm. woofer
- Paper cone – foam edge
- RMS output power: 30 watt
- Impedance: 8 Ohm
- Sensitivity: 89 dB
- Frequency response: 100-6000 Hz
- Magnet weight: 8 oz
- Voice coil diameter: 20 mm.
- Woofer Master Audio of 10,00 cm of diameter (4") model cw400/8; Mobile coil of the woofer in kapton of 2,00 cm of diameter (0,8"); Cone in cellulose black; Suspension in foam; Power rms: 30 watt; Power max: 60 watt; Frequency of resonance: 100 hz
- Impedance: 8 ohm; Sensitivity': 89 db; Frequency reponse: 100 - 6000 hz; Total diameter of the woofer: 10,20 cm (square); Distance for the attack of the screws in diagonal: 11,00 - 12,00 cm; Diameter of the magnet: 7,10 cm; Mounting depth: 4,30 cm; Woofer weight: 360 grams; Weight of the wrapping: 400 grams; Singly sold
- Woofer Master Audio of 10,00 cm of diameter (4") very powerful and very compact with black cone in cellulose and suspension in foam. The impedance is 8 ohm therefore and proper for uses in the house, dj, disco, system dolby surround and other. Excellent also for fittings in car where is possible to install is singly them, both to couple or also more pieces for door. The frequency reponse is 100 - 6000 hz. The relationship quality' / price is elevated
- This woofer can be amplified by the radio of series. Is possible to apply 30 watt rms channel to get the good result. To avoid irreparable damages to the woofer not to overcome the powers recommended from the house
|
5" Neodymium Coaxial Transducer - 90 dB sensitivity 1 W / 1 m
- 130 W + 25 W Power Handling
- 1.5" + 1" Voice Coil
- Single point source providing coherent wave front
- 90° conical dispersion
- Optimal for compact 2-way Systems
| |
- 1,5'' voice coil Kapton former and aluminium winding
- Rubber surround with DAR technology
- Cone waterproof treatment
- Ventilated voice coil to reduce power compression
- 89.8 dB sensitivity
|
Nominal Specifications
* Nominal Diameter 5“, 130 mm
* Overall Diameter 6.02/5.51“, 153/140 mm
* Bolt Circle Diameter 5.5“, 139 mm
* Baffle Cutout Diameter 5.04“, 128 mm
* Depth 3.1“, 79 mm
* Flange and Gasket Thickness 0.29“, 7.5 mm
Electrical Specifications
* Minimum Impedance 8.8 Ohm
* Nominal Impedance 12 Ohm
* Nominal Power Handling*** 80 W
* Maximum Power Handling**** 160 W
* Sensitivity (1W/1m) 99 dB
* Frequency Range 180 - 6300 Hz
* Voice Coil Diameter 1.26“, 32 mm
* Winding Material Copper
* Former Material Kapton
* Winding Depth 0.29“, 7.5 mm
* Magnetic Gap Depth 0.24“, 6 mm
* Flux Density 1.65 T
THIELE & Small Parameters
* Resonant Frequency (fs) 180 Hz
* DC Resistance (Re) 7.2 Ohm
* Coil Inductance (Le) 0.15 mH
* Mechanical Q (Qms) 2.70
* Electromagnetic Q (Qes) 0.59
* Total Q (Qts) 0.48
* Compliance Equivalent Volume (Vas) 0.033 ft³, 0.93 dm³
* Mechanical Compliance of Suspension (Cms) 0.075 mm/N
* Rms 3.93 Kg/s
* BL Product (BL) 11.3 N/A
* Diaphragm Mass inc. Airload (Mms) 8.4 grams
* Maximum Linear Excursion (Xmax)* 2.75 mm
* Xdamage** 15.2 mm
* Surface Area of Cone (Sd) 14.6“², 94.3 cm²
* Diaphragm mass (Mmd) 7.5 g
* Eta Zero 1.23 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Faital Pro 5 FE 100 A 5" Speaker 80 W 8 Ohms
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
5 "
Nominal Diameter
130 mm
Voice Coil
1.26 "
Voice Coil
32 mm
Overall diameter
124.5 mm
Pitch Circle Diameter
133 mm
Cut- out Measurement
114 mm
Mounting holes
4
Diameter of fixing holes
6 mm
Depth
65 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
80 W
maximum rated load
160 W
Sensitivity (1 W / 1 m)
88 dB
Frequency response
65 - 6300 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
65 Hz
Re (DC resistance)
5.4 Ohm(s)
Qms (mechanical quality)
8.18
Le (inductance of the voice coil)
0.53 mH
Qes (electrical quality)
0.47
Qts (overall quality)
0.44
Vas (equivalent volume)
5.16
Mms (moving mass)
10.5 g
BL (power factor)
6.9 T/m
Xmax (maximum displacement)
5.25 mm
Cms (elasticity of the suspension)
0.55 mm/N
Sd (membrane area)
79.8 cm²
Rms (mechanical loss resistance)
0.57 kg/s
Weight
1,12 kg
|
Reviews
There are no reviews yet.