Content | MASTER AUDIO – CW400/8
100 mm. woofer
- Paper cone – foam edge
- RMS output power: 30 watt
- Impedance: 8 Ohm
- Sensitivity: 89 dB
- Frequency response: 100-6000 Hz
- Magnet weight: 8 oz
- Voice coil diameter: 20 mm.
- Woofer Master Audio of 10,00 cm of diameter (4") model cw400/8; Mobile coil of the woofer in kapton of 2,00 cm of diameter (0,8"); Cone in cellulose black; Suspension in foam; Power rms: 30 watt; Power max: 60 watt; Frequency of resonance: 100 hz
- Impedance: 8 ohm; Sensitivity': 89 db; Frequency reponse: 100 - 6000 hz; Total diameter of the woofer: 10,20 cm (square); Distance for the attack of the screws in diagonal: 11,00 - 12,00 cm; Diameter of the magnet: 7,10 cm; Mounting depth: 4,30 cm; Woofer weight: 360 grams; Weight of the wrapping: 400 grams; Singly sold
- Woofer Master Audio of 10,00 cm of diameter (4") very powerful and very compact with black cone in cellulose and suspension in foam. The impedance is 8 ohm therefore and proper for uses in the house, dj, disco, system dolby surround and other. Excellent also for fittings in car where is possible to install is singly them, both to couple or also more pieces for door. The frequency reponse is 100 - 6000 hz. The relationship quality' / price is elevated
- This woofer can be amplified by the radio of series. Is possible to apply 30 watt rms channel to get the good result. To avoid irreparable damages to the woofer not to overcome the powers recommended from the house
|
- 180 W continuous program power capacity
- 38 mm (1.5 in) copper voice coil
- 90 - 7000 Hz response
- 90 dB sensitivity
- Shorting copper cap for extended HF response
SPECIFICATIONS
Nominal Basket Diameter
|
5" / 127mm
|
Impedance
|
8 ohms
|
RMS Power Rating
|
90 Watts
|
Program Power
|
180 Watts
|
Frequency Response
|
90Hz - 7.0kHz
|
Sensitivity (1W/1m)
|
90dB
|
Voice Coil Diameter
|
1.5" / 38mm
|
Winding Material
|
Aluminum
|
Former Material
|
Kapton
|
Winding Depth
|
.37" / 9.5mm
|
Magnetic Gap Depth
|
.24" / 6mm
|
Flux Density
|
1.15T
|
MOUNTING INFORMATION
Overall Diameter
|
5.9" / 150mm
|
Bolt Circle Diameter
|
5.6" / 142mm
|
Baffle Cutout Diameter
|
4.8" / 122mm
|
Depth
|
2.95" / 75mm
|
Flange & Gasket Thickness
|
.35" / 9mm
|
No. Of Mounting Holes
|
4
|
Net Weight
|
1.9 lbs./ .85 kg.
|
THIELE-SMALL PARAMETER
Resonant Frequency (fs)
|
92Hz
|
Impedance (Re)
|
5.5 ohms
|
Electrical Factor(Qes)
|
.5
|
Mechanical Q (Qms)
|
11
|
Total Q (Qts)
|
.48
|
Compliance Equiv. Vol. (Vas)
|
3.3 Liters/.12cu. ft.
|
Voice Coil Overhang (Xmax)
|
3.3mm
|
Reference Efficiency
|
0.5%
|
BL Factor
|
8.5 T-M
|
Coil Inductance(Le)
|
0.35mH
|
Surface Area of Cone (Sd)m2
|
0.0095m2
|
|
Faital Pro 5 FE 100 A 5" Speaker 80 W 8 Ohms
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
5 "
Nominal Diameter
130 mm
Voice Coil
1.26 "
Voice Coil
32 mm
Overall diameter
124.5 mm
Pitch Circle Diameter
133 mm
Cut- out Measurement
114 mm
Mounting holes
4
Diameter of fixing holes
6 mm
Depth
65 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
80 W
maximum rated load
160 W
Sensitivity (1 W / 1 m)
88 dB
Frequency response
65 - 6300 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
65 Hz
Re (DC resistance)
5.4 Ohm(s)
Qms (mechanical quality)
8.18
Le (inductance of the voice coil)
0.53 mH
Qes (electrical quality)
0.47
Qts (overall quality)
0.44
Vas (equivalent volume)
5.16
Mms (moving mass)
10.5 g
BL (power factor)
6.9 T/m
Xmax (maximum displacement)
5.25 mm
Cms (elasticity of the suspension)
0.55 mm/N
Sd (membrane area)
79.8 cm²
Rms (mechanical loss resistance)
0.57 kg/s
Weight
1,12 kg
|
JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.
This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.
|
LSR25P LF Driver Description:
This is the JBL low frequency driver (MPN 124-10002-00) for the LSR25P powered reference monitor. It is a genuine JBL replacement part sold to you sealed just the way we get it from JBL. The device is mounted in a frame which bolts into the front baffle of the speaker from the inside. You must dismantle the speaker to replace this driver. Order carefully, returns for your mistakes are not allowed.
| |
Reviews
There are no reviews yet.