Master Audio MQA5100 Professional Power Amplifier 2x450W RMS/4Ohm, 2x350W RMS/8Ohm

Original price was: €297.60.Current price is: €275.27. incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Professional amplifier – 350W RMS each channel on 8 Ohm – 450W RMS each channel on 4 Ohm – Frequency response: 10-50.000 Hz – Input sensitivity: 0,775V – Signal/noise rate: >98dB – Segregation ratio: >70dB – Dumping factor: >350 – Input impendance: 20Kohms – Slew rate: 55V/microsec. – Thermal protection, short circuit, overload – Ground/Lift […]

 

Read more

Professional amplifier

– 350W RMS each channel on 8 Ohm

– 450W RMS each channel on 4 Ohm

– Frequency response: 10-50.000 Hz

– Input sensitivity: 0,775V

– Signal/noise rate: >98dB

– Segregation ratio: >70dB

– Dumping factor: >350

– Input impendance: 20Kohms

– Slew rate: 55V/microsec.

– Thermal protection, short circuit, overload

– Ground/Lift switch

– RCA, Jack 6.3 mm inputs

– Speakon, jack 6.3 mm, binding connector output

– Dimensions: 482 x 294 x 88 mm

– Weight: 12kg

– Package: 1 piece each box

Weight 13.00 kg
Impedance

Reviews

There are no reviews yet.

Be the first to review “Master Audio MQA5100 Professional Power Amplifier 2x450W RMS/4Ohm, 2x350W RMS/8Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

Master Audio MQA5100 Professional Power Amplifier 2x450W RMS/4Ohm, 2x350W RMS/8Ohm removeAMERICAN AUDIO VLP-600 Power Amplifier 2x300 Watts removeAUDAC AUDPA152 2-channel Digital Power Amplifier 2 x 150 W removeRCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS remove
NameMaster Audio MQA5100 Professional Power Amplifier 2x450W RMS/4Ohm, 2x350W RMS/8Ohm removeAMERICAN AUDIO VLP-600 Power Amplifier 2x300 Watts removeAUDAC AUDPA152 2-channel Digital Power Amplifier 2 x 150 W removeRCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS remove
Image
SKUMQA5100E002985AUDPA152HPS1500E009274ED600
Rating
Price Original price was: €297.60.Current price is: €275.27. incl. GR VAT Original price was: €500.00.Current price is: €470.00. incl. GR VAT Original price was: €409.19.Current price is: €376.95. incl. GR VAT Original price was: €806.00.Current price is: €596.44. incl. GR VAT Original price was: €863.20.Current price is: €830.00. incl. GR VAT Original price was: €781.20.Current price is: €585.89. incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentProfessional amplifier - 350W RMS each channel on 8 Ohm - 450W RMS each channel on 4 Ohm - Frequency response: 10-50.000 Hz - Input sensitivity: 0,775V - Signal/noise rate: >98dB - Segregation ratio: >70dB - Dumping factor: >350 - Input impendance: 20Kohms - Slew rate: 55V/microsec. - Thermal protection, short circuit, overload - Ground/Lift switch - RCA, Jack 6.3 mm inputs - Speakon, jack 6.3 mm, binding connector output - Dimensions: 482 x 294 x 88 mm - Weight: 12kg - Package: 1 piece each box

VLP Series Powere Amplifier

 

Output Power: 300W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 200W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 300

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift Limiter

Dimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spaces

Weight: 33 lbs. / 15 Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; Limiter

The DPA152 is built as two channel (Stereo) amplifier, capable of delivering a power of 2 x 150 Watt in stereo mode, or 300 Watt in bridged mono mode. It features various specific functions and advanced protection circuitry which protects against DC malfunctioning, short circuit, overheating and overload.

The signal input connections are accommodated with balanced XLR connectors and signal link through with other amplifiers is possible using the XLR output connectors. The operation mode can be selected between Stereo mode, Bridge mode and Parallel mode. The output connections are accommodated with both Speakon and Euro-Terminal blocks.

  • Model name: DPA152
  • 8 ohms: 2 x 80 W
  • 4 ohms: 2 x 150 W
  • 8 ohms Bridge: 300 W
  • THD+N:
  • Signal / Noise: > 100 dB
  • Frequency Response: 20 Hz - 20 kHz
  • Power Supply: 110 - 240 V AC / 50 - 60 Hz
  • Dimensions (W x H x D): 482 x 44 x 330 mm

 

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 750 Watt rms 
Power output stereo 8Ω:2 x 450 Watt rms 
Power output bridged 8Ω:1500 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:106 dB 
Damping factor:> 300 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:xlr 
Input sensitivity:1.4 V (/ 32 – 26 dB) dBm/V RMS 
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ 
OUTPUT SECTION
Output connector:Speakon 
SYSTEM PARAMETERS
Cooling:Forced 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220 ÷ 240 V (50 / 60 Hz) V ~ Hz  
PHYSICAL SPECIFICATIONS
Height:88/3.4 mm/inch 
Width:482/18.9 mm/inch 
Depth:420/16.5 mm/inch 
Net Weight:17/37.4 Kg/Lbs

 

 

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 300 Watt rms 
Power output stereo 8Ω:2 x 180 Watt rms 
Power output bridged 8Ω:600 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start thermal on transformer 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:6 A 
Power Consumption:1300 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:11.45 / 25.24 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:470 / 18.05 mm/inch 
Shipping Weight:13.81 / 30.44 Kg/Lbs

 

Weight13.00 kg15.00 kg5.00 kg20.00 kg14.80 kg13.81 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 13.00 kg
Impedance

Weight 15.00 kg
Weight 5.00 kg
Weight 20.00 kg
Weight 14.80 kg
Weight 13.81 kg