Content | MASTER AUDIO SB300 PASSIVE SPEAKER 2 way 12“+1.4" 280Wrms
- Power output 280 W RMS
- Impedance(Ohm) 8
- ABS box
- Woofer 300 mm, paper cone
- Compression driver, 34 mm titanium diaphragm
- Frequency reponse: 40 - 17KHz (-10dB)
- Sensitivity: 108 dB
- Speakon input and output
- Dimensions (H x W x D): 595 x 390 x 305 mm
- 11 kg
| Axial Sensitivity 94 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 82 Hz - 18 k Hz
Frequency Response (-10 dB) 55 Hz - 20 k Hz
Recommended High-Pass Frequency 45 Hz
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-12K, 305mm (12”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 2.1 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 607 mm (23.9“)
Width 362 mm (14.25“)
Depth 340 mm (13.39“)
Weight Net 15.8 kg (34.83 lbs)
Shipping Weight 20 kg (44.09 lbs) |
Dual 12-inch two-way with 700 watts continuous, 2100 watts peak power handling. BIampable with 600 watts/4ohm LF and 75 watts 8ohm HF. DH7 3-inch voice coil titanium compression driver coupled with 75°x50° asymmetric CD horn aimed downward 10° . Weight: 35kg Measurements: 99x39x37,5cm |
Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black This item is BLACK. The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker. • 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications • High output, 131dB SPL capacity • Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor • 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil • Rugged, high-tech polypropylene enclosure • 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B
Active or Passive |
Passive |
Frequency Response |
-10dB:48-20,000Hz |
Power Capacity |
600W |
Maximum Sound Pressure Level (SPL) |
131dB |
Nominal Sensitivity |
97dB |
Impedance |
8 Ohms |
Crossover |
2KHz |
Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
Enclosure Material |
Polypropylene Structural Foam |
Input Connections |
Neutrik Speakon NL4\'s x 2 |
Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
Weight |
43.7 lbs (19.8 kg) |
|
The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 133 dB | | Horizontal coverage angle: | 60° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 100 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 2000 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12“woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600/23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs | |
|
The Electro-Voice ZX3 offers an unprecedented level of lightweight 12-inch two-way loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, ZX3 continues the groundbreaking innovation of the Electro-Voice DVX woofer program, joining the ranks of EVs ZX series between the 8-inch ZX1 and the 15-inch ZX5. When it comes to problem/solution versatility, ZX3 is truly in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall/ceiling mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter, allow ZX3 to be easily and precisely configured in multiple box arrays, mounted on truss or tripods, deployed as monitors, or used as system mains with a subwoofer. Housed in a stylish yet rugged injection molded enclosure, ZX3 shares the same functionality as the larger ZX5, with 90° x 50° or 60° x 60° horn dispersion patterns, 45° or 55° monitor angles, passive or bi-amp operation, and seven M8 rigging points. ZX3 is available in a weatherized version and in either black or white finish. The optional HDC-3 heavy duty stackable cover is also available.
Specifications
Frequency Response (-3dB) |
58 - 15000 Hz |
Frequency Response (-10dB) |
48 - 20000 Hz |
Sensitivity 1W/1m |
97 dB |
System Power Handling (continuous/program/peak) |
600/1200/2400 Watts |
Low Frequency Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
High Frequency Power Handling (continuous/program/peak) |
40/80/160 Watts |
LF Transducer |
DVX3121 |
HF Transducer |
ND2 |
Enclosure Material |
Polypropylene |
Color |
Black |
Outdoor |
Yes |
Speaker Type |
Fullrange |
Weight Net |
19.8 kg ( 43.65 lbs ) |
|
Reviews
There are no reviews yet.