Content |
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Upper Frequency Limit: 40 - 120 Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output 650 watts Continuous. 1200 watts (peak)
Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Phase Control 0-90-180-270 degrees
Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level -60 to +10dB in 1dB increments
Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input 3.5mm mono jack socket
Connections Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance 20 kohms
Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth 28 mm (1 1/8 Inches)
Weight (unpacked) 35.3 kg (77.6 lbs)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption Maximum 1000W. Standby
Fuse Type 20mm UL/VDE (Value is region specific)
IR Remote Control Code NEC SH6122
|
Description Active balanced-drive closed-box subwoofer system
Drive units 2x Ø300mm (12 in) Rohacell® cone long-throw
Frequency range -6dB at 15Hz and 250Hz
Frequency response ±3dB 17Hz - 145Hz
Power output: 1000W
Rated power consumption: 135W
Standby power Consumption: 100dB
Functions: 5 Presets
Input sensitivity
Gain
Low-pass filter
Graphic equalisation
Room compensation
Auto on/standby
Trigger on/standby
Trigger preset switching
RS-232 automation control
Inputs: Stereo Line In (2x RCA Phono)
Mono (LFE) Line In (RCA Phono)
Mono (LFE) Line In (XLR balanced)
Dimensions Height:490mm (19.3 in) not including feet
Width: 460mm (18.1 in) including grilles
Depth: 410mm (16.2 in) including controls
Net weight 44kg (97 lb)
Cabinet finish Gloss Black
Cherrywood
Rosenut
Grille Black cloth
ALSO AVAILABLE IN Cherrywood, rosenut
|
Amplifier Output: 1000 watts (RMS) 2000 watts (Peak) Frequency Response: 16Hz to 40/160Hz variable Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from 12 - 36dB/Octave Sub-Sonic Filter (High Pass): 16Hz - 31Hz EQ: 4 x Presets 1 x User Setting Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB increments from -31 to -80dB) Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time 5, 10, 15, 20, 25 & 30 minutes Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º Internal Memory: 3 Independent memory locations Cabinet Specification: Sealed Cabinet with 25mm thick M.D.F construction with critical internal bracing Amplifier Classification: Class-D amplifier with DSP control Driver Complement: 1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil External Dimensions - Excluding Plinth: Width: 485mm (19 inches) Height: 455mm (18 inches) Depth: 475mm (18 3/4 inches) Weight: 50 Kg (110lbs) Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set) Trigger Input: 3.5mm Jack input, +12Vdc = On State User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Dimensions | Metric :12” W x 17-7/8” D x 14-7/16” H | 30.5 x 45.4 x 36.7 cm
Driver Complement :One high-definition 10" woofer pressure coupled to one 10" low bass radiator.
Frequency Response :18Hz – 150 Hz
Internal Amplifier Power :300 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Low Level Inputs :One LFE input (for SW preout only)
High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available with high level inputs only
Available Finishes :Matte Black
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Packaging :One to a carton
Weight | Metric :31 lbs | 14.1 kg
Warranty :5 Years; 3 Years for Amplifiers
|
imensions | Metric :14-1/4” W x 14-1/4” D x 14-1/10” H | 36.2 x 36.2 x 35.8 cm
Driver Complement :One high-definition 10" long throw woofer, pressure coupled to two 10” low bass radiators
Frequency Response :13 Hz – 200 Hz
Internal Amplifier Power :1500 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :Two pairs of 5 way binding posts
High Level Outputs :Two pairs of 5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level Outputs :Two low level outputs: left and right low level out
High Level High Pass Crossover :Non Variable 6 dB/octave @ 80 Hz: Available only with high level inputs and outputs
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz. Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave, continuously variable from 40 Hz – 150 Hz: Available only with high level inputs and outputs or low level inputs and outputs
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :70 lbs | 31.8 kg
Warranty :5 Years; 3 Years for Amplifiers
| Hxείο Sub, high Fidelity, 300 Watts Continuous Program Power (2 hrs) 150 Watts ContinuousPink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs), 115dB average, 121dB peak (near corner) 109dB average, 115 dB peak (center of wall) 32 Hz ? 200 Hz +-3dΒ Eπιλογή λειτουργίας 70/100v/, 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, με 1 woofer 200 mm (8 in) με polypropylene cone, ανάρτηση butyl rubber, με πηνίο φωνής 38 mm (1.5 in) 4-layer copper-clad, και αεριζόμενο former αλουμινίου. Διαστάσεις: 356 x 391 x 203 mm. Περιέχεται βάση στήριξης. Χρώμα Μαύρο-Λευκό. Μπορεί να λειτουργήσει με 2 ή 4 δορυφόρους ?ηχεία, και σε συνδυασμό με ηχεία οροφής της σειράς 40 της JBL. Βάρος 9kg. |
Reviews
There are no reviews yet.