Content |
Product details
Woofer: 10-inch Paper Cone
Frequency response: 20Hz – 40Hz ~ 120Hz
Crossover frequency: 40-120Hz adjustable
Lf - Amplifier Power: 300W
Signal LF: >90dB
THD + N @ Rated Power LF: 0.08%
Inputs: 2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs: 2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity: +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse: 0° /180° switch
Available colors: Red, Black
Gross Weight: 22.4kg / 49.2lb
Net weight: 18.7kg / 41.1lb
Gross Dimensions: L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions: L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in
|
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.
The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.
8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement Technical SpecificationsInputs | 2x Balanced 1/4" TRS
2x Unbalanced RCA | Outputs | 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option) | Frequency Response | 30 Hz - 200 Hz | Low Pass Filter | 50 - 130 Hz (variable) | Signal to Noise Ratio | >98 dB (A weighted) | THD | 0.05% | Amplifier Power | 200 W peak, 100 W RMS | Power Consumption | 120 W | Amplifier Type | Class AB | Max Peak SPL | 104 dB at 1 m | Woofer | 8" glass-composite, downward-firing | Port | Rear-firing bass reflex (round) | Input Gain Adjustment | -30 to +6 dB | Polarity Reverse | 0 or 180° | Low Pass Filter | 50 Hz to 130 Hz | High Pass Filter | On/off | Protection | RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
| Power | 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz | Cabinet | Vinyl-laminated MDF | Dimensions | 10.2 x 12.6 x 11.0" (260 x 320 280 mm) | Weight |
21.2 lb (9.6 kg)
|
|
The Genelec 5040B is an extremely compact active subwoofer designed to complement up to five 6010B's with accurate and dynamic bass response reaching down to 35 Hz. Matched perfectly with the 6010B's, the 5040B conveniently features a remote volume control allowing adjustment of the entire sound system as well as versatile acoustic controls for perfect room integration.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
Designed by Genelec's R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 5040B subwoofer features an unobtrusive, modern appearance.
The 5040B features a magnetically shielded downward firing 6 1/2" bass driver attached to a die-cast aluminium base plate.
The base plate also serves as the chassis for the 40 Watt amplifier and crossover filter circuitry. The 5040B packs a respectable punch of 98 dB maximum sound pressure level
| 98 dB | | Main 35 - 85 Hz (± 3 dB)
LFE 35 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 6.5" Active | | 40 W | | H x D 251 x 305 mm | | 6.3 Kg (13.9 lb) | | 5.1 RCA analog in
1 x 3.5 mm stereo jack in
5 x RCA analog out |
|
10" Subwoofer
Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.
So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.
All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.
Tech Talk
Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.
The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.
The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.
All in all, the ThunderStorm subwoofers will make any system sound better and more complete.
As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.
Passive Radiator
The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.
Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.
The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.
Product | TS110 | Description | Subwoofer | Dimensions (WxHxD) [mm] | 330 x 485 x 430 | Dimensions (WxHxD) [“] | 12.99 x 19.09 x 16.93 | Free-field frequency range (-3dB) | 28Hz - 300Hz | Woofer | 250mm/10“ | Maximum SPL @ 1m | 108dB | Number of amplifiers | 1 | Total short-term output power | 250W | Protection limiter | Yes | Settings |
| System volume (Satellite & Sub) | -inf. - +6dB | Subwoofer volume | -inf. - +6dB | Level-lock dip switch | Yes | Filter-lock dip switch | Yes | Input level dip switch | +7dBu/+22dBu | Phase inversion | 0°/180° | Switchable Satellite filter | flat/80Hz | Variable Subwoofer filter | 60Hz-140Hz + LFE | Remote control | Sys. & Sub. Vol. | Connectors |
| XLR in left (impedance) | (10k) | XLR in right (impedance) | (10k) | XLR in LFE (impedance) | (10k) | XLR out satellite left (impedance) | (10k) | XLR out satellite right (impedance) | (10k) | XLR out (LFE) (impedance) | (10k) | Power consumption |
| Standby | | Full output | 250VA | Misc. |
| Weight kg/lb. | 19.6 / 43.2 |
|
Dynaudio 9S, Active Subwoofer 24 cm (9.5“) Woofer, 300 Watt Class-D Amp, Frequency Range: 22 Hz - 175 kHz (+/- 3dB), 37 mm front baffle, Master/Slave Function, adjustable Lowpass Filter, Connections: XLR, SAT output with defeat-able highpass filter, Auto On/Off Function.
Dimensions: 266 x 320 x 276 mm, Weight: 10.5 kg
Type: |
Studio Monitor Subwoofer |
Woofer: |
9.5" long-throw MSP |
Amplifiers Power: |
300W Class-D |
Input/Output Plugs: |
XLR Balanced |
Frequency Response: |
22-250Hz +/- 3dB |
Dimensions (W x H x D): |
266 x 276 x 320 mm |
Weight: |
10.5 kg |
|
Reviews
There are no reviews yet.