| Content | TONAR DIAMOND 387DS
For Shure Cartridges M 44C High Quality Stylus Conical Diamond for Turntable. N75B Type 2 or DN325, Luxor 3823 was earlier called N75-6 Type 2. This popular stylus type is widely used for M75-6, M75-6S, M75-6 Type 2, M75B Type 2 and M75 Type D. Recommended tracking force is 1,5g to 3g.
Specs:
- Stylus N 75 ED Type II
- Elliptical Diamond Tip 0.3 x 0.7 mil
- Tracking Force: 2.0 – 2.5 grams tracking pressure
- Stylus Color: Black or Yellow
For Cartridges: M75G, M75B, M73, M71, M71MC, M73, M75ED, M75EJ, M75E, M75HE, M44MB, M44C, M44MC, M55, M44E, M44EM, M44MA, M44MB, M44MF, M80EM98, M98/A, M99, Shure AMC50E.
For Needles: N75E, N75EC, N75ED, N75EJII, N75, N75C,
Fits the following Turntables models: Garrard DD 130, DD 131, DD 132, DD 132 LX, DD 139, DD 75, GT 35 P, Luxor 3823, Dual 1009, 1016, 1019, Schneider DN-325 and more
Note: This needle was installed on the following turntable models when they were sold.
If the original cartridge has been replaced with a different type, this needle won’t fit.
Match your old needle to the picture before you make a purchase.
This stylus was used in the following turntables:
The stylus is used in the following turntable cartridges: M 75
Fits also for N75E, N75EC, N75ED, N75EJII |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
|
Ortofon 540MKII Stylus Technical Data
Frequency range 20-27.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 90 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude FG 70
Stylus tip radius r/R 5/70 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 540 Mkll, 540, 540 P |
| Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | Replacement stylus for the Carl Cox Signature CS-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Stylus 3E
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-18.000 Hz + 2 / - 3 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,5-2,0 g (15-20 mN) |
| Tracking force, recommended |
1,75 g (17,5 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value
|
Reviews
There are no reviews yet.