| Content |
The TLM 170 R was the first microphone to use the successful fet 100 technology. Along with a balanced, transformerless output stage it features extremely low self-noise and an impressive dynamic range.
Five directional characteristics are selectable by means of a rotary switch. In the sixth position, marked 'R', the directional patterns can be controlled remotely with the N 248 power supply. There is no special cable necessary for this purpose.
The microphone has at its rear a 10 dB attenuation switch for extremely high sound pressure levels, and a high-pass filter to suppress structure born noise. |
| Acoustical operating principle | Pressure gradient transducer | | Directional pattern | Cardioid | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 13 mV/Pa | | Rated impedance | 50 ohms | | Rated load impedance | 1000 ohms | | Equivalent noise level, CCIR1) | 23 dB | | Equivalent noise level, A-weighted1) | 12 dB-A | | Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) | 71 dB | | Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) | 82 dB | | Maximum SPL for THD | 110 dB | | Maximum SPL for THD | 129 dB | | Maximum output voltage for THD | -1 dBu | | Dyn. range of the mic. amplifier /A-weighted, 0.5 %2)) | 98 dB | | Dyn. range of the mic. amplifier /A-weighted, 5 %2)) | 117 dB | | Supply voltage (P48, IEC 61938) | 48 V ± 4 V | | Current consumption (P48, IEC 61938) | 3.2 mA | | Matching connector | XLR 3F | | Weight | 825 g | | Diameter | 78 mm | | Length | 165 mm |
1) According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal |
|
|
NT2000 - ?Explore, Control, Create?? Seamlessly Variable Dual 1? Condenser Microphone.
The world's first large diaphragm condenser studio microphone with seamlessly variable Polar
Patterns, Filter and Pad located conveniently on the microphone body. The NT2000?s state of
the art surface-mount electronics combined with the new Australian designed and manufactured
HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB
with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.
The NT2000 is supplied with the SM2 Shock Mount, together in a durable custom carry case.
SPECIFICATIONS:
Acoustic principle:
Externally polarised 25 mm (1?) dual diaphragm condenser
Directional pattern: Multipattern
Frequency range: 20Hz - 20KHz
Output impedance: 200 ohms
Signal noise ratio din iec 651: 87 dB (1kHz rel 1Pa)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1K ohm) 157dB (@ 1% THD into 1K ohm) with pad set to maximum
Sensitivity:
-36 db re 1 Volt/Pasca (16 mv @94db SPL) +/- 2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: Phantom P48
Weight without battery: 831 gm
Weight with battery: 2.6 kg
| A/B, X/Y, and M/S stereo recording
Ambience recording
Grand piano, woodwind and brass instruments
Percussions
Drums
Classical music recording
Studio applications
- Back-to-back large-diaphragm multi-pattern transducer
- True condenser technology
- High sensitivity and 155 dB maximum SPL capability
- Switchable 20 dB preattenuation pad
- Switchable bass cut filter
- Legendary, pristine AKG sound quality
- Complete with spider-type shock mount and aluminium carrying case
| Type |
Dual-capsule,1-inch large-diaphragm, true condenser pressure-gradient microphone |
| Polar pattern |
Cardioid, omnidirectional, figure-eight |
| Frequency range |
20 to 20,000 Hz |
| Sensitivity |
28 mV/Pa (-31 dBV) |
| Max. SPL |
135/155 dB SPL (0/-20 dB) for 0.5% THD |
| Equivalent noise level |
16 dB-A (IEC 60268-4) |
| Signal/noise ratio (A-weighted) |
78 dB |
| Preattenuation pad |
0 dB, -20 dB |
| Bass filter |
12 dB/octave, 300 Hz |
| Impedance |
=1000 ohms |
| Current consumption |
|
|
| Variable large diaphragm microphone | | Pressure-gradient transducer with double membrane capsule | | The studio microphone classic | | Three directional characteristics: omni, cardioid, figure-8 | | Switchable low frequency roll-off | | Switchable 10 dB pre-attenuation | |
Ideal as main and as support microphone in the most differing recording situations
| Acoustical operating principle | Pressure gradient transducer | | Directional pattern | Omnidirectional, cardioid, figure-8 plus | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 20/28/22 mV/Pa1) | | Rated impedance | 200 ohms | | Rated load impedance | 1 kohms | | Equivalent noise level, CCIR2) | 26/23/25 dB1) | | Equivalent noise level, A-weighted2) | 15/12/14 dB-A1) | | Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL) | 68/71/69 dB1) | | Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL) | 79/82/80 dB1) | | Maximum SPL for THD 0.5%3) | 117 dB (cardioid) | | Maximum SPL for THD 0.5% with preattenuation3) | 127 dB | | Maximum output voltage | 390 mV | | Dynamic range of the microphone amplifier (A-weighted) | 105 dB | | Supply voltage (P48, IEC 61938) | 48 V ± 4 V | | Current consumption (P48, IEC 61938) | 0.8 mA | | Matching connectors | XLR3F | | Weight | 500 g | | Diameter | 56 mm | | Length | 200 mm |
| |
| Large diaphragm cardioid microphone | | Pressure gradient transducer with with one-diaphragm capsule | | Transformerless circuitry | | Extremely low noise: 7 dB-A | | Includes swivel mount | | Straightforward handling for homerecording and professional studios | |
High-quality professional equipment for limited budgets
| Acoustical operating principle | Pressure gradient transducer | | Directional pattern | Cardioid | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 23 mV/Pa | | Rated impedance | 50 ohms | | Rated load impedance | 1 kohms | | Equivalent noise level, CCIR1) | 17.5 dB | | Equivalent noise level, A-weighted1) | 7 dB-A | | Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) | 76.5 dB | | Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) | 87 dB | | Maximum SPL for THD 0.5%2) | 138 dB | | Maximum output voltage | 13 dBu | | Dynamic range of the microphone amplifier (A-weighted) | 131 dB | | Supply voltage (P48, IEC 61938) | 48 V ± 4 V | | Current consumption (P48, IEC 61938) | 3 mA | | Matching connector | XLR3F | | Weight | approx. 450 g | | Diameter | 60 mm | | Length | 132 mm |
|
|
Reviews
There are no reviews yet.