The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.
Optimized Return Loss
Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.
Rear Twist BNC Cable Connector
Crimp Dimensions
In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.
Pin:
1.07 mm
Shield:
6.47 mm
Crimp die:
DIE-R-BNCX-PDG
Approved Cables
To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.
Suitable cables:
Argosy Image 720, CAE HD08370LSZH, Canford SDV-I-X-LFH, Clark Wire CD7559F, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801, Draka 755-803, Draka 755-804, Gepco VPM2000, Proel HPC 810, Suhner S0426, Sommer 600-0451, Sommer 600-162(F), Percon VK6
UHD optimized cables:
Belden 1505A, Belden 1505ANH, Belden 1505DNH, Belden 4505R, Belden 70081, Belden 70081NH, Belden 70081CH, Bryant SD50F, Canare L-4CFB, Clark CD7559, DirectCable 301-299 Evolution XPC, Draka Highflex 0.8L/3.7Dz, Draka HD Pro 0.8/3.7 AF, Klotz VD083SH, Klotz V08/37H, Sommer vector 0.8/3.7
Title
NBNC75BLP9X
Connection Type
BNC 75 Ω
Gender
male
Electrical
Contact resistance
≤ 3 mΩ (inner)
Contact resistance
≤ 2 mΩ (outer)
Dielectric strength
1.5 kVdc
Impedance
75 Ω
Insulation resistance
> 5 GΩ
Rated voltage
< 50 V
VSWR
≤1.06 / >30 dB up to 6 GHz
≤1.13 / >24 dB up to 12 GHz
≤1.22 / >20 dB up to 18 Ghz
Mechanical
Cable O.D.
6.3 mm
Cable retention
> 30 N (center)
Crimp size
6.47 Hex crimp (shield)
Crimp size (pin)
1.07 crimp
Insertion force
< 25 N
Lifetime
> 1000 mating cycles
Wiresize
Locking device
Bayonett
Cable anchoring
Jacket crimping
Material
Contacts
Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)
Shell
Brass (CuZn39Pb3)
Shell plating
Antraloy
Insert
PP
Environmental
Temperature range
-30 °C to +85 °C
Contact crimpability
Complies with IEC 60803 and IEC 60352-2
Weight
0.1 kg
Reviews
There are no reviews yet.
Be the first to review “NEUTRIK NBNC75BLP9 BNC REAR TWIST CABLE CONNECTOR 4K 8K” Cancel reply
Optimized contact pin and insulator design for UHD-data transmissions
Proven rearTWIST technology
Swiss antraloy plating
Fully compatible with conventional BNC chassis connectors
Improved return loss values at high frequencies
Professional Cat.6a connector with screwable grommet
Fully shielded against electrical interference thanks to metal housing and integrated copper fleece
Contacts coated with 50µm gold
For cable diameters from 7 - 8.5 mm
IDC clamp for perfect fixation of the individual wires in the connector
with IP20 protection cap
Content
The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.
Optimized Return Loss
Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.
Rear Twist BNC Cable Connector
Crimp Dimensions
In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.
Pin:
1.07 mm
Shield:
6.47 mm
Crimp die:
DIE-R-BNCX-PDG
Approved Cables
To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.
Suitable cables:
Argosy Image 720, CAE HD08370LSZH, Canford SDV-I-X-LFH, Clark Wire CD7559F, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801, Draka 755-803, Draka 755-804, Gepco VPM2000, Proel HPC 810, Suhner S0426, Sommer 600-0451, Sommer 600-162(F), Percon VK6
UHD optimized cables:
Belden 1505A, Belden 1505ANH, Belden 1505DNH, Belden 4505R, Belden 70081, Belden 70081NH, Belden 70081CH, Bryant SD50F, Canare L-4CFB, Clark CD7559, DirectCable 301-299 Evolution XPC, Draka Highflex 0.8L/3.7Dz, Draka HD Pro 0.8/3.7 AF, Klotz VD083SH, Klotz V08/37H, Sommer vector 0.8/3.7
Title
NBNC75BLP9X
Connection Type
BNC 75 Ω
Gender
male
Electrical
Contact resistance
≤ 3 mΩ (inner)
Contact resistance
≤ 2 mΩ (outer)
Dielectric strength
1.5 kVdc
Impedance
75 Ω
Insulation resistance
> 5 GΩ
Rated voltage
< 50 V
VSWR
≤1.06 / >30 dB up to 6 GHz
≤1.13 / >24 dB up to 12 GHz
≤1.22 / >20 dB up to 18 Ghz
Mechanical
Cable O.D.
6.3 mm
Cable retention
> 30 N (center)
Crimp size
6.47 Hex crimp (shield)
Crimp size (pin)
1.07 crimp
Insertion force
< 25 N
Lifetime
> 1000 mating cycles
Wiresize
Locking device
Bayonett
Cable anchoring
Jacket crimping
Material
Contacts
Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)
Shell
Brass (CuZn39Pb3)
Shell plating
Antraloy
Insert
PP
Environmental
Temperature range
-30 °C to +85 °C
Contact crimpability
Complies with IEC 60803 and IEC 60352-2
Adam Hall Connectors 4 STAR C CAT6
RJ45 Cat.6a connector
General
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
application
RJ45 Cat.6a
Gender
male
Contacts
Bronze
Contacts Coating
50µm Gold
Housing
Die casting zinc alloy
Conductor diameter
1.2 - 1,65 mm
Cable diameter
7 - 8,5 mm
Width
14 mm
Height
14 mm
Depth
55.9 mm
Weight
0,0235 kg
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections. Designed to protect the fragile latch and cover of standard RJ45 connectors from breakage, you will find uses for this connector system in Ethernet networking of audio, commercial, entertainment, stage production, DMX lighting, industrial and outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female receptacles. The cable end offers a robust diecast shell as a carrier for pre- assembled RJ45 plugs. Female chassis connectors are based on the current Neutrik "A" series as well the "D" series of XLR receptacles with secure latching system - a feature not found on other RJ45 receptacles. Termination is offered in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products comply with Category 5 shielded or unshielded and are compatible for use with 10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone terminals, "D" style ? Mfg. #NE8FDV-YK
Neutrik introduces BNC 75W cable connectors in push-pull and rear-twist versions. Featuring a true 75W design that meets the stringent requirements of HDTV/DVD, these connectors sustain consistent impedance at high frequencies up to 3 GHz, are easy to handle in high density applications such as video patchbays and switchers, show excellent return loss and VSWR, consist of machined parts that are precisely made to our high standards and offer a center pin assembly with a snug fit to provide tactile indication when the contact is snapped into position.
Push-Pull BNC Cable Connector
* Unique push-pull locking system is ideal for ultra high-density applications, patching, etc. * Assembly is fast and easy a requires only a standard center contact crimp (.063“/1.60 mm) after cable prep * Use of a standard crimp size eliminates the need for different crimp dies and facilitates field repair * Innovative screw lock cable retention with the jacket providing superior pull strength * Standard color is black, optional colored boots available
* For use with cable types: Belden 1855A, Commscope 7538, Cordial CVI 4(5...)
Accommodates NE8MC* or any standard RJ45 plug
The adapter offers the approved latch lock system
The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
Electrical
Contact resistance
< 10 mΩ
Dielectric strength
1 kVdc
Frequencyrange
1 - 100 MHz
Insulation resistance
> 0.5 GΩ
Rated current per contact
1,5 A
Rated voltage
< 50 V
Standard compliance
TIA/EIA 586B, IEC11801
Mechanical
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
Locking device
Latch lock
Material
Contact plating
0.2 µm Au over Ni plating
Contacts
Bronze (CuSn8)
Insert
PBTP 15 % GR
Shell
AlMgSi 0.5, black plated
Strain relief
CuZn35Pb2, Tin plated
Environmental
Flammability
UL 94 HB
Temperature range
-30 °C to +80 °C
Product
Title
NE8FF
Connection Type
Adapter
Gender
female
For Pre-Assembled RJ45 Plugs
Lockable Cable Connection Carrier
Die-Cast Shell with Bushing & Boot
Up to 0.31" Cable Diameter
Chuck-Style Strain Relief
RJ45 Plug Not Included
RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter up to 8 mm. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Neutrik NE8MX-B Overview
Upgrade the protection of a pre-assembled RJ45 plug with the NE8MX-B etherCON RJ45 Cable Connector Carrier for Pre-Assembled RJ45 Plugs from Neutrik. Boasting a black chromium die-cast shell, bushing, and boot, the NE8MX-B comes with chuck-style strain relief, as well as two cable-protection elements for cable diameters up to 0.31".
Note: The NE8MX-B does not include an RJ45 plug, and it does not intermate with Neutrik NE8FDY-C6 and NE8FDY-C6-B Cat 6 chassis connectors.
Design and Protection
Ideal for harsh and demanding environments, the NE8MX-B is designed to protect Ethernet connections in a variety of commercial applications, and it helps to prevent breakage of the fragile components of standard RJ45 connectors. The carrier allows for the assembly of pre-assembled conventional RJ45 cables.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.