| Content | Neutrik introduces BNC 75W cable connectors in push-pull and rear-twist versions.
Featuring a true 75W design that meets the stringent requirements of HDTV/DVD,
these connectors sustain consistent impedance at high frequencies up to 3 GHz,
are easy to handle in high density applications such as video patchbays and switchers,
show excellent return loss and VSWR, consist of machined parts that are precisely
made to our high standards and offer a center pin assembly with a snug fit to provide
tactile indication when the contact is snapped into position.
Push-Pull BNC Cable Connector
* Unique push-pull locking system is ideal for ultra high-density applications, patching, etc.
* Assembly is fast and easy a requires only a standard center contact crimp (.063“/1.60 mm)
after cable prep
* Use of a standard crimp size eliminates the need for different crimp dies and facilitates
field repair
* Innovative screw lock cable retention with the jacket providing superior pull strength
* Standard color is black, optional colored boots available
* For use with cable types: Belden 1694A, Commscope 5765, ELF Inc. Cable, Eupen 705
CRT 5V-HS, Gepco VSD2001, Nokia/Draka 1.0/4.8 AF, Suhner S05133-07, Suhner S05163-02 |
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone
terminals, "D" style ? Mfg. #NE8FDV-YK | Adam Hall Connectors 4 STAR C CAT 5
Network plug | Cat.5e
- Standard Cat.5e RJ45 connector from our 4 Star Series
- With screwable grommet and lockable protective housing
- Completely shielded against electrical interference
- For cable diameters from 5 - 6.8 mm
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
| Micro USB Male to HDMI Female MHL HDTV Adapter Cable for Samsung Galaxy S3 i9300 (Black)
Features:
This adapter allows you to connect your mobile with any standard HDMI video cabled so you can share what is on your mobile's screen with other HDMI enabled visual equipment, like a monitor or TV. This is perfect for sharing photos with family or friends or giving a presentation to a client.
3 In 1 Function – Length: 10cm, Micro USB/HDMI/MHL Adapter
Support 1080P Full HD video resolutions
Video Resolution: 480i, 480P, 720i, 720P, 1080i, 1080P (1920×1080/60Hz)
Support 7.1 Surround Channels, 192KHz Audio transmission
Support High-bandwidth Digital Content Protection (HDCP)
Mirror your phone through the Standard HDMI Output on a compatible TV |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black |
The rearTWIST HD BNC cable connector offers a true 75 Ω design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.
Suitable cables:
Belden 1855A, Clark Wire CD7523-7, CommScope 7538, Cordial CVI 4(5...)
Crimp size:
Pin: 1.6 mm (square)
Shield: 4.53 mm (hex)
Features & Benefits
- “rearTWIST Principle” locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
- Ideal for recessed bulkheads where access to the “head” of the connector might be an issue. These connectors turn from the back and not the front.
- True 75 Ω design meets the stringent HDTV / DVD requirements
- Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
- Snug-fit center pin insert provides tactile feedback
- Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
- Excellent cable protection and retention
- Precise Swiss machined brass parts for outstanding durability
- Accessories include color coded boots in 10 standard colors, crimp tool and dies
| Title |
NBNC75BDD6 |
| Connection Type |
BNC 75 Ω |
| Gender |
male |
| Contact resistance |
≤ 3 mΩ (inner) |
| Contact resistance |
≤ 2 mΩ (outer) |
| Dielectric strength |
1,5 kVdc |
| Insulation resistance |
> 5 GΩ |
| Rated voltage |
<50 V |
| VSWR |
≤1.050/>32 dB up to 1 GHz
≤1.065/>30 dB up to 2 GHz
≤1.100/>26 dB up to 3 Ghz |
| Cable O.D. |
4.3 mm |
| Cable retention |
> 30 N (Center) |
| Crimp size |
4,53 Hex crimp (shield) acc. IEC 60803 (die designation C) |
| Crimp size (pin) |
1,6 Square crimp (pin) acc. IEC 60803 (die designation 2) |
| Insertion force |
< 25 N |
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Locking device |
Bayonett |
| Cable anchoring |
Jacket crimping |
| Contacts |
Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact) |
| Insert |
PTFE |
| Shell |
Brass (CuZn39Pb3) |
| Shell plating |
Optalloy® |
| Temperature range |
-30 °C to +85 °C |
| Contact crimpability |
Complies with IEC 60803 and IEC 60352-2 |
|
Reviews
There are no reviews yet.