Stock | Only 1 left in stock (can be backordered)
| Available on backorder
| In stock (can be backordered)
| Only 1 left in stock (can be backordered)
| In stock
| In stock (can be backordered)
|
Content |
3 pole female cable connector, "heavy duty“, all metal design, gold contacts The X-HD Series is a "Heavy duty" XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard. - “Heavy duty" cable connector for outdoor use
- All metal design
- NC*FX-HD mates with NC*MPR-HD chassis connector and NC*MX-HD cable connector
- Dust and water protected according IP 65 in mated condition
- Gold contacts
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
| XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
B-NE5-FPD - XLR chassis female 5pin D-type |
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.Suitable for Speakon chassis connectors | NC3MXX
3 pole cable connector, male. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 2 ?m Ag silver
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Reviews
There are no reviews yet.