| Content |
3 pole male cable connector, "heavy duty“, metal boot and stainless steel shell, gold contacts The X-HD Series is a "Heavy duty" XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard. - “Heavy duty" cable connector for outdoor use
- All metal design
- Male connector in stainless steel
- NC*MX-HD mates with NC*FX-HD cable connector
- Dust and water protected according IP 65 in mated condition
- Gold contacts
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
| NC3MXX-B
3 pole cable connector, male. Black metal housing and gold contacts.
The 3 Pole Male Cable Connector from Neutrik is manufactured with a black metal housing and gold contacts.
It is reliable, easy to assemble and improves contact integrity as well as cable strain relief.
Male connector with improved locking recess without "window“, more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors. | These compact, low profile, right angle cable connectors are designed to select
any of 7 positions in 45° increments by rotating the assembled insert into various
indents before securing the back cover. Connector type: XLR male. Shell: Nickel.
Contacts: Silver. Mfg. #NC3MRX. |
Neutrik NC5FD-LX 5-pin XLR Female Connector
Universal D-size metal body XLR panel mount series. UL recognized component.
5 pole female receptacle, solder cups, Nickel housing, silver contacts
Features & Benefits
Robust "D" metal shell
Standardized D sized 24 mm panel cutout
Solder cups on 3 - 7 pole version
Product
Connector Type XLR
Gender female
Electrical
Capacitance between contacts ??? 7 pF
Contact resistance ??? 5 m?©
Dielectric strength 1,5 kVdc
Insulation resistance > 2 G?© (initial)
Insulation resistance > 1 G?© (after damp heat test)
Rated current per contact 7,5 A
Rated voltage 50 V
Mechanical
Insertion force ??? 20 N
Withdrawal force ??? 20 N
Lifetime > 1000 mating cycles
Wire size max. 1.0 mm?²
Wire size max. 18 AWG
Wiring Solder contacts
Locking device latch lock
Mounting direction front & rear
Chassis shape D
Material
Contact plating 2 ??m Ag over 2 ??m Ni
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Locking element Steel Ck67
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel
Environmental
Approvals UL
Flammability UL 94 HB
Standard compliance IEC 61076-2-103
Solderability Complies with IEC 68-2-20
Temperature range -30 ?°C to +80 ?°C |
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 7.5 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuSn6
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Latch lock (female): St3K32
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C
* Flammability: UL 94HB
* Solderability: complies with IEC 68-2-20
* Protection class: IP 65
* Compatibility: IEC 61076-2-103 standard
|
Reviews
There are no reviews yet.