| Stock | In stock (can be backordered)
| In stock (can be backordered)
| Available on backorder
| Only 5 left in stock (can be backordered)
| In stock (can be backordered)
| In stock
|
| Content | This series has become the accepted worldwide standard for XLR cable connectors.
The compact design offers the shortest XLR cable version in the industry. The female
features an insert that's completely surrounded by metal for added protection and the
shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is
quick and easy with no screws to worry about and includes the unique Neutrik chuck
type strain relief. | NC3MXX-B
3 pole cable connector, male. Black metal housing and gold contacts.
The 3 Pole Male Cable Connector from Neutrik is manufactured with a black metal housing and gold contacts.
It is reliable, easy to assemble and improves contact integrity as well as cable strain relief.
Male connector with improved locking recess without "window“, more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | B-NE5FX - XLR female extension 5pin
NC5FX | NC3FXS-B
Female with noiseless ON-OFF rotary switch (shorts no. 2 and 3). Black metal
housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard
NC3FXS Female with noiseless ON-OFF rotary switch | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
The handy dust protection cover can be used, when no cable connector is mated. The
cover is easy to use and does not block the connectors in the panel below when not in
use.Suitable for Speakon chassis connectors |
Reviews
There are no reviews yet.