Content |
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections. Designed to protect the fragile latch and cover of standard RJ45 connectors from breakage, you will find uses for this connector system in Ethernet networking of audio, commercial, entertainment, stage production, DMX lighting, industrial and outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female receptacles. The cable end offers a robust diecast shell as a carrier for pre- assembled RJ45 plugs. Female chassis connectors are based on the current Neutrik "A" series as well the "D" series of XLR receptacles with secure latching system - a feature not found on other RJ45 receptacles. Termination is offered in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products comply with Category 5 shielded or unshielded and are compatible for use with 10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone terminals, "A" style ? Mfg. #NE8FAV-YK |
RJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry. The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market. Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables. - Accommodates NE8MC* or any standard RJ45 plug
- Approved latch lock system
- Mountable from the front or rear of the panel
- Complies with Cat 5e according to TIA / EIA 568B and ISO / IEC 11801 standard
| Βύσμα σασσί D-shape για CAT6A, shielded, IDC termination, nickel housing.
D-shape CAT6A panel connector, shielded, IDC termination, nickel housing
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
Features & Benefits
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Shielded system - high noise immunity and EMI protection
Technical Information
Product |
|
Title |
NE8FDX-Y6 |
Gender |
female |
Electrical |
|
Dielectric strength |
1 kVdc |
Insulation resistance |
> 0.5 GΩ |
Rated current per contact |
1.5 A |
Transmission performance |
CAT6A, acc. TIA/EIA rating
CAT6A, acc. IEC/ISO/EN rating |
Power over Ethernet |
PoE++ acc. IEEE 802.3bt |
Mechanical |
|
Lifetime |
> 1000 mating cycles |
Wiresize |
|
Wiresize |
solid: AWG 26/1 - AWG 22/1
stranded: AWG 26/7 - AWG 22/7 |
Locking device |
Latch lock |
Mounting direction |
Front mounting |
Insulation diameter |
0.85 - 1.6 mm |
Material |
|
Contact plating |
Au |
Shell |
Zinc diecast (ZnAl4Cu1) |
Shell plating |
Nickel |
Environmental |
|
Flammability |
UL 94 V-0 |
Temperature range |
-40 °C to + 70 °C |
|
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
Durability |
500 times |
Center Pin |
zinc alloy |
Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
Storage |
-30°C to +70°C |
Material |
ABS Zinc |
Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
Withstand Voltage |
1500V rms |
|
|
Outer Contact: |
≤ 1 ohm |
|
|
|
BNC Bulkhead Chassis Connectors. Based on a new production technology, the machined brass connector body provides and extremely rugged and non- abrasive connection over long term use. They are an ideal combination when used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable connectors. Available in isolated or grounded versions, in "D" shaped housing or single feed through chassis mountings. Isolated versions solve potential grounding problems and prevent common-mode influence with other connections conducted over the same panel ground potential. Gold plated center contact. Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series ? Shell Color: Nickel | HDMI feedthrough adapter, D-shape housing
Neutrik\'s HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy.
- To transmit any digital TV and PC video format including high-definition video (HDTV).
- HDMI feedthrough adapter with 19 pole HDMI receptacle at both ends
- IP65 ingress protection in mated condition with NKHDMI-* and SCDP-* sealing gasket
- Universally accepted standard D-shape housing
- Removable screen to chassis grounding
|
Reviews
There are no reviews yet.