Content |
SILVER
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
|
- Input impedance 47kohms/100pF
- Gain 32dB
- Output voltage typically 200mV/1kHz at 5mV/1kHz
- Noise floor 82dB (88dB - A weighted)
- THD
|
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.
A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.
The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.
Specifications
Output impedance = 200Ω Recommended minimum output load resistance = 5K Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB) RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.
Input sensitivity (for 200mV output) 4 off = 133uV 4 on = 67uV
Input loading resistance 1 and 2 off = 400Ω 1 on = 100Ω 2 on = 150Ω 1 and 2 on = 70Ω
Input loading capacitance 3 off = 1000pF 3 on = 4300pF Gain (at 1KHz) 4 off = 63.5dB 4 on = 69.5dB
Maximum input level (at 1KHz) 4 off = 6.7mV 4 on = 3.4mV
Load settings for adjustable MC stages
Impedance -100ohm Capacitance - 1000pF Gain setting - High (\'On\' position for Rega phono stages)
Fono MC dip switches settings (factory set at Rega for Rega MC models). |
Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible) CD playback Optional digital volume and channel balance control Balanced XLR and unbalanced RCA analogue audio outputs USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer ATF2™ audio up-sampling to 24-bit/384kHz Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging Selectable digital filters – linear phase, minimum phase, steep Audiophile grade toroidal transformer delivering ultra-low low noise and distortion Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control RS232 controllable Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control Available in black and silver finishes
|
Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible) CD playback Optional digital volume and channel balance control Balanced XLR and unbalanced RCA analogue audio outputs USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer ATF2™ audio up-sampling to 24-bit/384kHz Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging Selectable digital filters – linear phase, minimum phase, steep Audiophile grade toroidal transformer delivering ultra-low low noise and distortion Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control RS232 controllable Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control Available in black and silver finishes
|
THORENS MM-FLEX
The Thorens MM-Flex phono preamp is a high-quality preamplifier with portability in mind. Attach it to any surface with the included velcro adhesive—and better yet, due to its size you can take it with you! The Thorens MM-Flex is ideal for the on the go audiofile who may find themselves in a warehouse, surrounded by a particularly large sound system...for whatever reason.
MM-FLEX FEATURES
- Compact MM phono preamplifier
- Attaches to rear of turntable with integrated Velcro strip
- Can be easily removed and re-fitted without irreversible modification
|
Reviews
There are no reviews yet.