NOVATION CIRCUIT MONO STATIO PARAPHONIC SYNTH MODULE

Circuit Mono Station is a paraphonic analogue synthesiser that originates from the Novation Bass Station II, with three sequencer tracks that benefit from the 32 velocity-sensitive RGB pads found on Circuit.

• 32 RGB backlit velocity sensitive button grid
• 18 RGB backlit function buttons
• 8 Pots including dedicated filter and volume pots
• 2 Encoders for tempo and modulation path depth
• 6 RGB backlit mini pots for mixer section
• 4 35mm sliders for envelope ADSR control
• 16 Tact switches
• 27 Orange LEDs for functional selection
• 19 RGB indicator LEDs
• 2 1/4” jack sockets for line out and audio input
• 3 3.5mm jack sockets for MIDI in, out and thru (MIDI din break-out cables included)
• 2 3.5mm jack sockets for analogue clock in and out
• 3 3.5mm jack sockets for CV, gate and aux CV output
• USB B 2.0 / MIDI comms only (no bus-power)
• Configurable MIDI channels
• Front-mounted 3.5mm jack socket for headphones
• Rubberised knob caps
• Rotary controls secured to the chassis with metal nuts
• Power supply connector
• Power switch
• Kensington Security Slot

• Paraphonic - dual osc, single amp with separate control of each oscillator\'s pitch
• 64 Synth patches
• 2 Oscillators + sub osc (follows the pitch of osc 1)
• Noise generator
• Coarse and fine tune per osc
• Waveform octave depth 16’, 8’, 4’ or 2’
• Ring mod between osc 1 and 2

Oscillator waveforms include:

• Sine, triangle, sawtooth, square / variable pulse width

Envelope

• 1 ADSR Envelope (Attack/Decay/Sustain/Release)
• Routable via the modulation matrix

LFO

• Single LFO with rate
• Sync mode
•  

Waveforms include:

• Sine, triangle, sawtooth, square / variable pulse width, sample and hold

Filter

• State variable OTA filter
• 12/24dB slope
• Low-pass / band-pass / high-pass
• Pre-filter overdrive
• Frequency and resonance controls

Modulation

• 4x8 Modulation matrix
• All modulation routes available at all times with depth control for each route
•  

Mod sources (4)

• Envelope
• LFO
• Modulation sequence
• Pad velocity
•  

Mod destinations (8)

• Osc 1 pitch
• Osc 2 pitch
• Osc 1 PWM
• Osc 2 PWM
• Amp
• Filter cut-off
• Distortion level
• Aux CV outpu

Mixer:

• Osc 1 level
• Osc 2 level
• Sub Osc level
• Noise generator level
• Ring modulation depth
• Audio In (with gain control)

Distortion

• 3 types of analogue distortion: 1, 2 and 3 (combination of 1 & 2)

• 32 Sessions
• 2 Tracks per session + 1 track modulation sequence
• 16 Patterns for osc 1, 8 patterns for osc 2 and mod sequence
• 16 Demo sessions
• Real time record (notes, with velocity and automation)
• Auto-quantise notes to steps and automation to 6 events per step
• Sequencer resolution 24 PPQN
• 51 Automation parameters
• All knob and slider movements can be recorded (excluding volume)
• All modulation route depths can be automated
• Tempo range 40 - 240 BPM
• Swing 20 - 80%
• Glide amount configurable per step
• 8 Pattern sync rates (incl. triplet rates)
• Pattern direction setting including ping-pong and random
• Pattern mutate
• 8 Global swing sync rates (incl. triplet rates)

Real Time Performance

• Full range velocity scanning and record. Editable to 16 levels
• 16 Scale types and chromatic transposition
• Synth expand view doubles playable area
• Dual view for playing osc 1 and osc 2 simultaneously and independently
• Paraphonic mode option switch to select how the amp envelope triggers
• Configurable pattern start and end points
• Configurable pattern chain
• Instant and queued Session switching
• Instant and queued Pattern switching

Editing

• Velocity and gate per step
• Fractional gate lengths (each step divisible by 6)
• Automation edit per step
• Clear step, automation parameter per pattern, pattern, session
• Duplicate step, pattern

• Ableton Live Lite 9 is included
• Circuit Mono Station is a USB-MIDI class compliant device

• Maximum power consumption 12V DC 1A

Add any sound sample to your drum or percussion setup via standard SD card (sold separately)
Built-in library of the 25 most-commonly requested percussion and electronic drum sounds
Bright blue backlit display and intuitive interface for easy operation in any amount of light
Four velocity-sensitive pads and a selectable input for a trigger or switch pedal
Save your favorite sound combinations for easy recall
Compact size integrates easily into almost any drum or percussion setup
Fits on a snare stand, sits tabletop, or mounts on any stand or rack*
Tune and add reverb to your sounds, then assign them to any of the four pads or the kick input
MIDI output for use as a controller for triggering sound modules and software

*Mountable to a stand or rack using the Alesis Module Mount (sold separately).

INCLUDES:
SamplePad
Power Supply
Quickstart Guide

Sound file format: sounds must be mono, 16/8-bit, 48/44.1/32/22.05/11.205 kHz.
Support SD Card:SD and SDHC up to 32 GB
Maximum total sample memory: 14MB
 
SOUNDS:
1 Clap
2 Finger Snap
3 Cowbell High
4 Cowbell Low
5 Triangle Muted
6 Triangle Open
7 Tambourine
8 Wind Chimes
9 Sleighbells
10 Claves
11 Block
12 Jawbone
13 Studio Shaker
14 Live Shaker
15 Electro Tom Hex
16 Timbale
17 Conga Slap
18 Conga Open
19 Electro Kick 8
20 Electro Kick 9
21 Electro Kick Hex
22 Electro Snare 8
23 Electro Snare 9
24 Electro Snare Hex
25 Electro Crack Hex

• 2 Synth tracks, 2 MIDI tracks, as well as 4 drum tracks
• Step sequencer with 32 steps (256 step sequences per track) with off grid function
• Integrated effects
• Synth patches, samples, and projects can be stored on microSD card (not included)
• 32 Velocity sensitive, backlit RGB keys
• 28 Backlit, tactile RGB keys
• 8 Infinitely adjustable rotary knobs
• Master filter control with centre detents
• Transport keys
• Integrated battery
• Class compliant: PC / Mac
• 2 Line inputs: 6.3 mm jack
• 2 Line outputs: 6.3 mm jack
• Stereo headphone output: 3.5 mm mini jack
• Sync output: 3.5 mm mini jack
• MIDI In/Out/Thru
• Dimensions (W x H x D): 240 x 45 x 210 mm
• Weight: 0.78 kg
• Includes USB cable and USB power supply

• Type: Analog Drum Machine with Sequencer
• Pads: 16 x Step Buttons
• Sounds: 11 x Drum Sounds
• Polyphony: 10-voice
• Patterns: 256 (16 songs, 16 patterns each)
• Sequencer: 64 steps
• Effects: Dual-mode Analog Filter, Wave Designer
• Analog Inputs: 1 x 1/4" (return)
• Analog Outputs: 1 x 1/4" TRS (main/mono), 10 x TS 1/4" (voice out)
• Headphones: 1 x 1/4" TRS (stereo)
• MIDI I/O: In/Out/Thru/USB
• Other I/O: 3 x 1/4" (trigger out), 1 x 1/8" (sync in), 1 x 1/8" (sync out)
• USB: 1 x Type B 2.0
• Power Source: 18V DC power supply (included)
• Height: 3.1"
• Width: 18.8"
• Depth: 10.4"
• Weight: 6.6 lbs.

Clockworks is a faithful reissue of the classic pedal made by Electro-Harmonix in the 1970s. It can be used as a master clock for sequencers and drum machines, and to trigger electronic percussion products like the EHX Crash Pad classic drum synth. Clockworks doesnʼt create sound on its own. It generates pulses to trigger other devices and can set the tempo for a drum machine or sequencer like EHXʼs 8 Step Program.