| Content |
DJ table mixer with 2-channels, for Serato DJ Pro
- Serato DJ Pro with DVS Licence Included
- Ready to connect to Serato NoiseMap™ Control Vinyl or CDs (available separately)
- InnoFADER scratch crossfader with reverse and slope control
- 6 direct access effect selectors with dual paddle launch triggers and Dry/Wet FX Control
- 8 performance pads to access hot cues, rolls and samples
- Filter knobs to create audio sweeps
- Dedicated instant looping knobs
- Phono/Line inputs
- Combo mic input (XLR/1?4-inch) w/ level and tone control
- 108dB S/N output with 24-bit digital sound quality
- Balanced high output XLR connection
- Separate booth/zone output
- Dual headphone output cueing system (?-inch/1?8-inch)
- Scroll and load tracks on the mixer easily by holding shift + loop encoder knob.
- Prime Loop Sound Pack included ($200 value)
- SoundSwitch lighting control software 2-month subscription included
- Mac: UAC2 Class Compliant (no add’l driver needed)
- Power Input Typical: 120VAC / 240VAC / 50Hz / 60Hz Auto-Switching
- Master Outputs (balanced XLR):
- Frequency Response: 20Hz – 20kHz (+0.2dB)
- Signal-to-Noise Ratio: 108dB (A-weighted, max output)
- THD+N 0.007% (1kHz, -1dBFS)
- Maximum Output Level: +20dBu
- Output Impedance: 300Ω
- Master and Booth Outputs (RCA):
- Frequency Response: 20Hz – 20kHz (+0.2dB)
- Signal-to-Noise Ratio: 107dB (A-weighted, max output)
- THD+N: 0.005% (1kHz, -1dBFS)
- Maximum Output Level: +6dBV (2Vrms)
- Output Impedance: 300Ω
- Headphone Outputs (?” and 1?8” TRS):
- Frequency Response: 20Hz – 20kHz (+0.2dB)
- Signal-to-Noise Ratio: 108dB (A-weighted, max output, unloaded)
- THD+N: 0.005% (1kHz, 10mW per channel into 32)
- Maximum Output Level: +14dBu (unloaded)
- Power Output: 115mW RMS (per channel into 32Ω)
- Output Impedance: 32Ω
- Line Inputs (RCA)
- Frequency Response: 20Hz – 20kHz (+0.3dB)
- Signal-to-Noise Ratio: 102dB (A-weighted, max input level)
- THD+N: 0.008% (1kHz, +6.8dBV, -1dBFS)
- Max Input Level: +7.8dBV (2.45Vrms)
- Input Impedance: 47kΩ
- Phono Inputs (RCA):
- Frequency Response: RIAA Curve
- Signal-to-Noise Ratio: 99dB (A-weighted, max input level)
- THD+N: 0.01% (1kHz, -3dB input)
- Other Specifications:
- USB USB 2.0 High-Speed
- ADC / DAC 24-bit, 48kHz
- DSP 32-bit fixed point
- Drivers PC: ASIO and Windows Audio
- Power supply
Internal 100v – 240v
- Dimensions
12.05\" (L) x 9.61\" (W) x 3.32\" (H)
| * 6 Dual stereo inputs, 2 with mic inputs
* RIAA preamps for up to 4 turntables
* Input selectors with 2 colour indicators
* Smooth action level controls
* 2 Stereo aux sends with pre/post switching
* 4 band EQ - high definition of frequency bands, with ʽinfinite killʼ on HF and LF; wide Q for cut, narrow Q for boost
* MIDI output from VCF 1+2, crossfader, LFO 2 (MIDI clock), dedicated data control and start/stop button
* Large ʽlight-pipeʼ illuminated cue switches
* 9 led 3 colour channel ʽbulls eyeʼ LED meters
* Crossfader and Filter assign switches
* Either smooth travel 60mm VCA faders or rotary VCA faders (Linear or Rotary versions)
* Active Penny & Giles VCA crossfader allowing contour to be set from smooth to scratch mix
* Cue/Mix monitor balance control
* 2 Independent mix outputs
* 2 Rotary master level controls
* Dual stereo analogue VCF effects
* 3 Filter modes combine for more effects
* Independent frequency sweep controls
* Resonance control for subtle or wild effects
* Filter LFO Depth and tempo controls
* Illuminated Filter switches punch effect in or out
* Powerful headphones monitor with auto cue
* Headphones split cue and Aux 1 & 2 monitoring
* Stereo music only booth monitor output
* Booth mono and mute switching
* 9 led 3 colour main ʽbulls eyeʼ LED meters
* Balanced +4dBu XLR stereo Mix 1 output
* Impedance balanced Line stereo Mix 2 output
* Pre-fade recording output
Technical Data
Outputs:
2 Independent mix outputs
Mix 1:Balanced 0dBu XLR stereo Mix 1
Mix 2:Impedance balanced Line stereo Mix 2 output
Booth monitor: Stereo music only
MIDI output from VCF 1+2
2 Headphone (6,3 mm/ 3,5 mm) | | Although the origins of the company date from 1965, ECLER presented its first mixer back in the 70s: the A4, a simple 4 channel mixer oriented to Super 8 film sound edition. The company grew in the 70s with the boom of disco and tourism.
The AC-4 was a high fidelity mixer designed to meet the most demanding sound requirements in discos, theatres, cinemas, recording studios, conference rooms... The electronic circuits and the extreme selection of all components and transistors used, made the AC-4 a professional high quality mixer.
The new AC-6 is a tribute to those old school, simple, robust, reliable and great sounding mixers. The AC6 enables a new generation of DJs to enjoy the unique sound of those legendary mixers. |
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
30 W |
| Inputs: |
| DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
| MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
| Impedance: |
1 kohms |
| Minimum input voltage: |
1.5 mV RMS |
| LINE 1-5: |
stereo RCA |
| Impedance: |
27 kohms |
| Minimum input voltage: |
150 mV RMS |
| PHONO 1,2: |
stereo RCA |
| Impedance: |
47 kohms |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| MASTER: |
stereo RCA, stereo XLR (3-pin) |
| ZONE: |
stereo RCA |
| Impedance: |
400 ohms |
| Output voltage: |
1 V RMS/ 0 dB |
| REC: |
stereo RCA |
| Impedance: |
5 kohms |
| Output voltage: |
225 mV RMS |
| Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
| Tone control (DJ MIC): |
| 1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| Tone control (channels 1-5): |
| 5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| S/N ratio: |
>80 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.02% |
| Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
| Weight: |
4 kg |
|
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
|
Reviews
There are no reviews yet.