| Content |
Ultra Torque-turntable
FEATURES:
Quartz-controlled for highest precision
Extremely resoncance-free due to optimally combined
components
With Reverse-function
Tone-arm height adjustable
Three preset speeds (33 1/3, 45 and 78 RPM)
Speed-control switchable from ± 10 % to ± 20 % and ± 50 %
Continuously pitchable without zero lock
Quartz-controlled for highest precision
Quartz Lock-button for returning to the preset standard speed
Platter and motor are directly connected for highest stability
Delivery without pick-up system
Two large Start/Stop-buttons
Start/Stop-time individually adjustable
Separate LED target lamp (stackable)
Adjustable anti-skating
Shock-absorbing feet
Power cable and RCA-cable detachable
Recessed connection for easy case-mounting
SPECIFICATIONS:
Type: 3-speed full manual turntable
Drive-method: Quartz-controlled direct-drive
Motor: Brushless DC-motor
Power supply: 230 V AC, 50 Hz ~
Power consumption: 13 W
Frequency range: 20 - 20,000 Hz, ± 1 dB
S/N-ratio: > 60 dB (DIN B)
Wow & Flutter:
Channel separation: > 20 dB
Speed: 33 1/3 RPM, 45 RPM and 78 RPM
Change-time between the speeds:
33 45 RPM in
33 78 RPM in
45 33 RPM in
45 78 RPM in
Rotation-direction: Forwards/backwards
Pitch adjustment: ± 10 %, ± 20 % or ± 50 %
via fader
Initial torque: > 4.5 kg/cm
Adjustable start time: 0.2 - 6 sec.
Brake: Electric brake
Adjustable stop time: 0.2 - 6 sec.
Platter: Outer diameter 332 mm
Weight 1,400 g
Tonearm: S-shape with Cardan's suspension
Tonearm-length: 230 mm
Adjusting the tonearm-height: 8-10.5 mm
Overhang: 15 mm
Adjustable stylus-pressure 2-5 g
Anti-Skating-range: 0-3 g
Dimensions: 450 x 350 x 160 mm
Weight: 11 kg
|
Features
- NEW features of the MK2 version:
- Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
- More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
- Particularly light weight and rigid, satin aluminium material used for tone arm
- Adjustable Pitch scale for precise adjustments
- Optional ground terminal offers additional protection in complex club & studio environments
- Easily replaceable, freely rotatable LED needle light in new aluminium design
- High-quality and hard-wearing deep black, metallic finish
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 - 6 sec.)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
- Precision manufactured, die cast aluminium turntable
- Rubber inlays for reduction of vibrations and background noise
- Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
- Quartz lock
- Additional start/stop button for vertical positioning
- Reverse function: switch for forwards and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no grounding required)
- Removable mains and RCA cable
- Safety mains switch
- Shock-absorbing feet against vibrations
Technical Data
Turntable:
-
- Type: direct-drive turntable
- Drive: quartz driven upper-torque direct drive
- Motor: 16-pole, 3-phase, brushless motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
- Starting torque: 2.8 – 4.5 kg/cm (adjustable)
- Adjustable stop time (0.2 - 6 sec.)
- Start-up time / change to RPM: 55dB (DIN-B)
- Brake system: electronic brake
Platter:
-
- Material: die cast aluminium
- Diameter: 332 mm
- Weight: approx. 1.5 kg
Tone arm:
-
- Type: universal, static balanced, S-shaped
- Effective length: 230 mm
- Overhang: 15 mm
- Tracking error range: < 3°
- VTA setting range: 0-6 mm
- Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
- Anti-skating range: 0 – 3 g
- Effective tone arm mass: 30 g
Connections:
-
- 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
General:
-
- Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
- Power consumption: 13 W
- Dimensions: 458 x 354 x 144,6 mm
- Weight: approx. 11.7 kg
Accessories included:
- turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, power cord, operating instructions
| AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Convert records to digital files via the USB output
- Professional anti-resonance, die-cast aluminium platter with felt mat
| Cartridge & Stylus |
| Replacement Stylus |
VM95 Series |
| Turntable |
| Type |
fully manual |
| Motor |
DC servo-controlled |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.0 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
2.75 W |
| Dimensions |
141,6 x 452 x 352 (H x W x D mm) |
| Weight |
8.0kg |
| Accessories Included |
AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2\') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter |
| Fusing Technics’ traditional analogue and leading-edge digital technologies
Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1200GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1200GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records.
Coreless Direct Drive Motor
In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement.
And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging,” which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging.
High-precision Motor Control
The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at a constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1200GR achieves maximum performance.
Two-Layer Platter Construction
The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.
Precision Tonearm
The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent lightweight and rigidity for the material of the tonearm pipe.
With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.
High-Rigidity Body
The SL-1200GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1200GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1200GR.
- Type: Direct Drive Manual Turntable
- Turntable Speeds: 33-1/3, 45 and 78 r/min
- Adjust Range: ±8 %, ±16 %
- Starting Torque: 2.2 kg-cm
- Build-up Characteristics: 0.7 s. from Standstill to 33-1/3 r/min
- Wow And Flutter: 0.025 % W.R.M.S.
- Rumble: 78 dB (IEC 98A weighted)
- Turntable Platter: Aluminium diecast
- Diameter: 332 mm
- Weight: Approx. 2.5 kg (Including rubber sheet)
- Tonearm Section
- Type: Universal Static Balance
- Effective Length: 230 mm (9-1/16″)
- Overhang: 15 mm (19/32″)
- Tracking Error Angle: Within 2° 32′ (at the outer groove of 30 cm record), Within 0° 32′ (at the inner groove of 30 cm record)
- Offset Angle: 22°
- Arm-height Adjustment Range: 0 – 6 mm
- Stylus Pressure Adjustment Range: 0 – 4 g (Direct Reading)
- Head Shell Weight: Approx. 7.6 g
- General
- Power Consumption: 11 W Approx., 0.2 W (Standby)
- Dimensions (WxHxD): 453 x 173 x 372 mm
- Weight: Approx. 11.5 kg
|
- Accurate playback
- Direct-drive motor
- Vertical tracking
- Adjustable insulator feet
- Solid construction
- Removable dust cover
General
- Colors Dark ebony
- Dimensions 500 x 394 x 185mm (W x D x H)
- Weight 18.5 kg
- Power Supply AC 100-240V, 50/60Hz
- Power consumption <4W
- Stdby Power consumption Less than 0.3W
- Carton maximum Dimensions 615 x 515 x 335 mm (W x D x H)
- Carton Weight 24.0 kg
- What's in the box Platter mat, Dust cover, Power cable, RCA cable and ground cable, Headshell, Overhang gauge, Screw set for cartridge mount (10, 13, 18mm), 2 x Cartridge spacers (1 mm), 2 x Plastic Washer, Screw driver, Counter weight, Sub-counter weight, Denon EP adapter/weight
| The AT-LP5 direct-drive turntable brings advanced technology and sleek, contemporary styling together for performance that looks as good as it sounds. Born of Audio-Technica’s rich analog heritage, the AT-LP5 incorporates a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. It comes outfitted with a lightweight (10 g) AT-HS10 headshell and high-performance AT95EX Dual Moving Magnet stereo cartridge, created specifically for this turntable.
Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5 turntable is a class leader in limiting low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, high-torque motor, ensuring stable, on-axis rotation at 33-1/3 or 45 RPM. The platter is topped by a 5 mm thick rubber damping mat that improves low-frequency reproduction.
The AT-LP5 features a built-in switchable phono/line preamp that enables it to be connected directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The turntable is also equipped with a USB output for direct connection to a computer, and comes with PC- and Mac-compatible Audacity® software that lets you convert your records to MP3, WAV or other digital audio file formats.
-
- Direct-drive, high-torque motor
-
- Fully manual operation with two speeds: 33-1/3 and 45 RPM
-
- Exclusive AT95Ex Dual Moving Magnet stereo cartridge with replaceable stylus
-
- Lightweight AT-HS10 headshell
-
- J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
-
- Switchable built-in pre-amplifier enables connection to components with or without a dedicated phono input
-
- Anti-resonance, die-cast aluminum platter
-
- Heavy rubber damping mat for improved low-frequency reproduction
-
- Sleek, matte black finish
-
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable, and Audacity recording software for MAC or PC
- Included dust cover and mounting hardware
| Type |
2-speed, fully manual operation |
| Motor |
DC motor |
| Drive Method |
Direct drive |
| Speeds |
33-1/3 RPM, 45 RPM |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.6 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 3.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
Computer interface - USB 2.0 compliant Windows XP, Vista or MAC OS X |
| Power Supply Requirements |
120V AC, 60 Hz |
| Power Consumption |
11 W |
| Dimensions |
450.0 mm (17.72“) W x 352.0 mm (13.86“) D x 157.0 mm (6.1“) H |
| Weight |
10.5 kg (23.1 lbs.) |
| Accessories Included |
AT95EX Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software; cartridge alignment and overhang adjustment template; dust cover with mounting hardware |
|
Reviews
There are no reviews yet.