OMNITRONIC EPA-100BT Mixing Amplifier, MP3 Player, Bluetooth 2x50W

Original price was: €235.28.Current price is: €193.00. incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4026397653663
Installments calculation
CompareAdd to wishlist Submit Better Price
10007078 – 19″ mixing amplifier with audio player, Bluetooth and 2 x 50 W power Built-in audio player with USB port and SD card slot Adjustable stereo line input via XLR and RCA jacks Adjustable microphone input on the front panel Controls for volume, bass and treble Stereo line output via XLR and RCA jacks […]

 

Read more

10007078 – 19″ mixing amplifier with audio player, Bluetooth and 2 x 50 W power

  • Built-in audio player with USB port and SD card slot
  • Adjustable stereo line input via XLR and RCA jacks
  • Adjustable microphone input on the front panel
  • Controls for volume, bass and treble
  • Stereo line output via XLR and RCA jacks
  • Screw terminals for low-impedance speakers
  • Efficient Class D technology
  • Extremely low weight and height due to integrated switch mode power supply
  • The device is cooled by cooling fan
  • Monochrome LCD display
  • (19″) 48.3 cm rack installation possible 1 U
  • For application areas such as: Trade fair and shop fitting; sports centres/gyms; restaurants, bars and hotels

Audio player

  • Bluetooth: Operating range up to 10m
  • Control via Bluetooth

Package contents

  • 1 x amplifier, 1 x power cord, 1 x user manual, 1 x declaration of conformity
Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 100 W
Output power: 30 W RMS (8 ohms)
50 W RMS (4 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Frequency range: 20 – 20000 Hz
Cooling: Cooling fan
Circuitry: Class D
Display type: Monochrome LCD display
Control elements: Groundlift selector
Controls: Limiter
Status LED: Power, signal, clip
Connections: Input: Microphone via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line via 2 x 3-pin XLR
Input: line via 1 x stereo RCA
Output: line via 2 x 3-pin XLR
Output: line via 1 x stereo RCA
Output: speaker via screw terminal
Equalizer: Master: 1 x 2-band tone control stereo
Housing design: (19″) 48.3 cm rack installation possible 1 U
Dimensions: Width: 48,3 cm
Depth: 21 cm
Height: 4,45 cm
Weight: 2,59 kg
Audio player
Control: Bluetooth
Audio player: USB + SD + Bluetooth
Range: Bluetooth: range up to 10m
Carrier frequency: 2,4 GHz
Music format: WMA; MP3, WAV
Available storage media: USB devices/SD cards max. 32GB
Weight 2.9 kg

Reviews

There are no reviews yet.

Be the first to review “OMNITRONIC EPA-100BT Mixing Amplifier, MP3 Player, Bluetooth 2x50W”

Your email address will not be published. Required fields are marked *

Quick Comparison

OMNITRONIC EPA-100BT Mixing Amplifier, MP3 Player, Bluetooth 2x50W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeINTERM R-150 PLUS AMPLIFIER 2X75W removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω remove
NameOMNITRONIC EPA-100BT Mixing Amplifier, MP3 Player, Bluetooth 2x50W removeDYNACORD SL-900 / 230V Power Amplifier 900 Watts 8Ω removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeINTERM R-150 PLUS AMPLIFIER 2X75W removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω remove
ImageOMNITRONIC EPA-100BT Mixing Amplifier with Audio Player, Bluetooth and 2x50W
SKUEPA-100BTE009273LDDP600L500R-150 PLUSE009302
Rating
Price Original price was: €235.28.Current price is: €193.00. incl. GR VAT Original price was: €738.39.Current price is: €710.00. incl. GR VAT Original price was: €509.54.Current price is: €450.00. incl. GR VAT Original price was: €1,261.01.Current price is: €1,070.11. incl. GR VAT Original price was: €510.00.Current price is: €459.00. incl. GR VAT Original price was: €832.00.Current price is: €754.00. incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

10007078 - 19" mixing amplifier with audio player, Bluetooth and 2 x 50 W power

  • Built-in audio player with USB port and SD card slot
  • Adjustable stereo line input via XLR and RCA jacks
  • Adjustable microphone input on the front panel
  • Controls for volume, bass and treble
  • Stereo line output via XLR and RCA jacks
  • Screw terminals for low-impedance speakers
  • Efficient Class D technology
  • Extremely low weight and height due to integrated switch mode power supply
  • The device is cooled by cooling fan
  • Monochrome LCD display
  • (19") 48.3 cm rack installation possible 1 U
  • For application areas such as: Trade fair and shop fitting; sports centres/gyms; restaurants, bars and hotels

Audio player

  • Bluetooth: Operating range up to 10m
  • Control via Bluetooth

Package contents

  • 1 x amplifier, 1 x power cord, 1 x user manual, 1 x declaration of conformity
Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 100 W
Output power: 30 W RMS (8 ohms) 50 W RMS (4 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Frequency range: 20 - 20000 Hz
Cooling: Cooling fan
Circuitry: Class D
Display type: Monochrome LCD display
Control elements: Groundlift selector
Controls: Limiter
Status LED: Power, signal, clip
Connections: Input: Microphone via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version) Input: line via 2 x 3-pin XLR Input: line via 1 x stereo RCA Output: line via 2 x 3-pin XLR Output: line via 1 x stereo RCA Output: speaker via screw terminal
Equalizer: Master: 1 x 2-band tone control stereo
Housing design: (19") 48.3 cm rack installation possible 1 U
Dimensions: Width: 48,3 cm Depth: 21 cm Height: 4,45 cm
Weight: 2,59 kg
Audio player
Control: Bluetooth
Audio player: USB + SD + Bluetooth
Range: Bluetooth: range up to 10m
Carrier frequency: 2,4 GHz
Music format: WMA; MP3, WAV
Available storage media: USB devices/SD cards max. 32GB

These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs)

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

The model L 500 is a 2 x 250 Watts Power Amplifier. Linear Precision Series
power amps combine excellent audio performance, modern and innovative
circuit design, meticulous and exceptionally rigid construction, and the highest
levels of operational integrity and reliability with an appropriate and more than
realistic price. The robust steel chassis provides outstanding torsional strength
through L-shaped side panels reaching under the thick aluminium front panel.
Thermal breakers prevent the power supply units from being damaged by thermal
overload. Electronically controlled fans provide sufficient front-to-rear airflow and
a special cool air diverter takes care of thermal stability. The fans? noise-level is
extremely low which provides the possibility for studio use. If necessary, a supplied
air-filter can be mounted behind the front panel ventilation louvres.
 
Features
* Excellent audio performance
* Symmetrical topology
* Ultra-low distortion
* Generously dimensioned power supply units
* Suitable to be operated on loads down to 2 ohms
* Suitable to drive complex loads with phase angles of ± 90 degree
* Extensive protection circuitry
* Unique Back-EMF protection
* Switchable limiters
* Switchable Hi/Lo-Cut filters
* Robust steel chassis
* Exceptional low noise front-to-rear air-flow
* XLR-type inputs and direct-outs
* LED display shows On, In, Out, Limit and Protect
* Highly reliable operation

Specs
* Max. Output Power - into 8 ohms : 2 x 180 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 280 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 320 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 640 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 175 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 250 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 300 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 45 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms,
   A-weighted, RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 25 V / ?s
* Power Consumption : 300 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 88.1 mm
* Depth : 426 mm
* Weight : 14 kg
 

Power Output Level R-150 PLUS

STEREO
8ohm(T.H.D 0.05%)  50W+50W
4ohm(T.H.D 0.05%)  75W+75W

BRIDGED MONO
8ohm(T.H.D 0.05%)  50W
8ohm(T.H.D 0.5%)  170W

Frequency Response 20Hz- 20kHz, ±0.5dB

Convection Cooled

SoftStart Protection System

Balanced 10k&ohm;@0.775V Inputs


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight2.9 kg12.60 kg13.00 kg16.00 kg7.20 kg12.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.9 kg
Weight 12.60 kg
Weight 13.00 kg
Weight 16.00 kg
Weight 7.20 kg
Weight 12.60 kg