OMNITRONIC PKD-352 studio amplifier SMPS, 2x175W/4ohms, 2x100W/8ohms

Original price was: €269.50.Current price is: €248.00. incl. GR VAT

Available on backorder

EAN: 4026397719444
Installments calculation
CompareAdd to wishlist Submit Better Price
10451616  OMNITRONIC PKD-352 Class D 2-channel studio amplifier with SMPS, 2 x 175 W / 4 ohms, 2 x 100 W / 8 ohms Low weight and height due to integrated switch mode power supply 2 operating modes can be selected (stereo or bridged) 2 level controls Electronically balanced inputs via XLR mounting jacks, with […]

 

Read more

10451616  OMNITRONIC PKD-352 Class D 2-channel studio amplifier with SMPS, 2 x 175 W / 4 ohms, 2 x 100 W / 8 ohms
  • Low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • The device is cooled by passive convection cooling
  • (19″) 48.3 cm rack installation 1 U

 

Power supply: 230 V AC, 50 Hz
Power consumption: 70 W 1/8 power
Protection class: Protection class I
Output power: 2 x 175 W RMS (4 ohms)
2 x 100 W RMS (8 ohms)
350 W RMS bridged (8 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Cable length: 1 m detachable
Device fuse: 4 x 10 mm, T 3,15 A Fuse fix on board
Frequency range: 20 – 20000 Hz
S/N ratio: >105 dB
THD: <0,05 % at 1 kHz
Cooling: Passive convection cooling
Impedance: Input: 20 kOhm , bal.
Input: 10 kOhm , unbal.
Gain: 38 dB
Housing color: Black
Circuitry: Class D
Slew rate: 20 V/µs
Damping factor: >300
Control elements: Power switch, level control per channel, mode switch (stereo/bridged), Input sensitivity switch
Controls: Softstart; DC voltage; VHF; current limiting; short-circuit; limiter; overheat
Status LED: Power, signal, clip
Connections: Input: line via 2 x 3-pin XLR
Input: line via 2 x RCA (F) mounting version
Output: speaker via 2 x speaker built-in socket (F)
Output: speaker via 2 x screw terminal
Input sensitivity: 0,775 V; 1,4 V , switchable
Housing design: (19″) 48.3 cm rack installation 1 U
Dimensions: Width: 48,3 cm
Depth: 19 cm
Height: 4,4 cm
Weight: 2,81 kg

Weight 3.3 kg

Reviews

There are no reviews yet.

Be the first to review “OMNITRONIC PKD-352 studio amplifier SMPS, 2x175W/4ohms, 2x100W/8ohms”

Your email address will not be published. Required fields are marked *

Quick Comparison

OMNITRONIC PKD-352 studio amplifier SMPS, 2x175W/4ohms, 2x100W/8ohms removeYAMAHA XP-1000 2X155W POWER AMPLIFIER removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER removeELECTRO VOICE PA 2450L Installation Power Amplifier 2 Channels, 2U 2 x 450 W removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω remove
NameOMNITRONIC PKD-352 studio amplifier SMPS, 2x175W/4ohms, 2x100W/8ohms removeYAMAHA XP-1000 2X155W POWER AMPLIFIER removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER removeELECTRO VOICE PA 2450L Installation Power Amplifier 2 Channels, 2U 2 x 450 W removeDYNACORD SL-1200 / 230V 1200 Watts 8Ω remove
ImageOMNITRONIC PKD-352 Class D Studio Amplifier
SKUPKD-352XP-1000LDDP600DSI-1000001804E009274
Rating
Price Original price was: €269.50.Current price is: €248.00. incl. GR VAT Original price was: €740.97.Current price is: €739.12. incl. GR VAT Original price was: €509.54.Current price is: €450.00. incl. GR VAT Original price was: €967.20.Current price is: €824.00. incl. GR VAT631.00 incl. GR VAT Original price was: €863.20.Current price is: €830.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content10451616  OMNITRONIC PKD-352 Class D 2-channel studio amplifier with SMPS, 2 x 175 W / 4 ohms, 2 x 100 W / 8 ohms
  • Low weight and height due to integrated switch mode power supply
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • The device is cooled by passive convection cooling
  • (19") 48.3 cm rack installation 1 U
 
Power supply: 230 V AC, 50 Hz
Power consumption: 70 W 1/8 power
Protection class: Protection class I
Output power: 2 x 175 W RMS (4 ohms) 2 x 100 W RMS (8 ohms) 350 W RMS bridged (8 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Cable length: 1 m detachable
Device fuse: 4 x 10 mm, T 3,15 A Fuse fix on board
Frequency range: 20 - 20000 Hz
S/N ratio: >105 dB
THD: <0,05 % at 1 kHz
Cooling: Passive convection cooling
Impedance: Input: 20 kOhm , bal. Input: 10 kOhm , unbal.
Gain: 38 dB
Housing color: Black
Circuitry: Class D
Slew rate: 20 V/µs
Damping factor: >300
Control elements: Power switch, level control per channel, mode switch (stereo/bridged), Input sensitivity switch
Controls: Softstart; DC voltage; VHF; current limiting; short-circuit; limiter; overheat
Status LED: Power, signal, clip
Connections: Input: line via 2 x 3-pin XLR Input: line via 2 x RCA (F) mounting version Output: speaker via 2 x speaker built-in socket (F) Output: speaker via 2 x screw terminal
Input sensitivity: 0,775 V; 1,4 V , switchable
Housing design: (19") 48.3 cm rack installation 1 U
Dimensions: Width: 48,3 cm Depth: 19 cm Height: 4,4 cm
Weight: 2,81 kg

Yamaha Power Amplifier - XP1000 2 x 110-Watts, 8-Ohms Stereo, 100-Volt, High Sound Quality,
20Hz-20kHz, High Reliability and High Stability, Light Weight and Compact Design of 2U Size,
High-Pass Filter.

The XP power amplifier series featuring high power, high quality, high reliability and high stability
matches various installation sound systems and provides superior acoustic features even in live
performance applications. The series is equipped with various protection circuits including a circuit
for detecting power-on/off, output protection circuit and DC detection circuit. Various indicators
display the status of the protection system. Indicators include PROTECTION indicator, TEMP
indicator that shows overheating of the heat sink, POWER/STANDBY indicator that shows the
power status, as well as SIGNAL and CLIP indicators for each channel.

APPLICATIONS:
Live Performance 
Churches 
Halls 
Banquet Rooms 
Conference Rooms 
Restaurants
 
5-model lineup ranging from 700W* output to 100W* output *(STEREO 8 ohms). 
High sound quality equivalent to upper-class models with parts and emphasizing
on superior sound. 
While realizing a design that ensures high sound quality, efficiency has been
planned down to the finest details for full achievement of both high-definition sound
and superior value. 
Yamaha's exclusive state-of-the-art high-efficiency amplifier driving technology
EEEngine installed. 
A gain switch that can be changed to +4dBu / 26dB / 32dB has been installed on the
rear panel for compatibility with a wide variety of input levels. 
Light weight and compact design of 2U size for installation in any location. 
Monitor and remote terminals for monitoring and control from a remote location. 
High-accuracy 1dB-step detented attenuator. 
Various terminals and features suitable for professional use. 
Special high-pass filter that enables change of cut-off frequency. 
Equipped with various protection circuits, indicators and stepless low-noise fans. 
Best matches with the digital mixing engine DME64N/24N and Installation series
speakers.
 
Output Power, 8? 100W+100W
S/N Ratio, 20Hz-20kHz 96dB
Idle Power Consumption 20 Watts
1/8 Power Consumption (4?/Pink noise) 170 Watts
Power Bandwidth (half power THD+N=0.5%) 10Hz-40kHz
THD+N 20Hz ? 20kHz, half power 0.1%
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response RL=8?, Po=1W,HPF=OFF 0dB
Channel Separation, Half power RL=8? 1kHz, ATT. Max input 600? shunt 70dB
Residual Noise Att. min, 20Hz-20kHz (DIN AUDIO) -70dBu
Damping Factor, 8?, f=1kHz 200
Voltage Gain, ATT. max 32dB or 26dB or +4dBu input sensitivity by select switch
Maximum Input Voltage +22dBu
Input Impedance 20k?(balance) 10k?(unbalance)
Controls, Front panel Power switch(push on/push off), attenuator(31position) x 2
Controls, Rear panel Mode switch(Stereo/Bridge/Parallel) x 1, HPF switch x 2,
Gain Select switch x 1
Connectors, Input XLR-3-31 type/ch, Euroblock connector(balance)/ch
Connectors, Output Speakon/ch, 5way binding post x 1
Connectors, Monitor/Remote Dsub15P x 1
Indicators Power/Standby x 1(Green/Orange), Signal x 2(Green), Clip/Limit x 2(Red)
Amplifier Protection Thermal: cut the output(heatsink temp ? 90°C) do not return
automatically
Power Requirements UC: 120V/60Hz, EU: 230V/50Hz, A: 240V/50Hz
Weight 12kg (26.5 Ibs.)
Dimensions (W x H x D) 480 x 88 x 456 mm (18-7/8" x 3-7/16" x 17-15/16“)
 

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

Engineered from the ground up for unmatched quality and performance,
the Crown? DSi Series of power amplifiers offers three models of 500W,
800W, and 1200W per channel at 4 ohms. Onboard digital signal processing
includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15
connector provides easy input/output connectivity between DSi amplifiers
and the new DSi-8M System Monitor.
The intuitive front panel LCD screen guides installers through a setup process?
featuring presets for the industry-standard JBL cinema loudspeaker systems?
to make configuration quick and easy.
At the touch of a button, Crown?s DSi cinema amplifiers deliver perfectly matched
performance with each award-winning JBL ScreenArray? system, making this the
ultimate cinema solution.

Features :
Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
Automatic presets for popular JBL cinema speaker systems for quick, easy
configuration
Intuitive front-panel LCD screen guides installers through setup
Onboard digital signal processing includes crossovers, EQ filters, delay, and
output limiting
Computer connectivity via USB allows fast setup and configuration with HiQnet?
System Architect? software
Rear-panel HD-15 connector provides easy input/output connectivity between DSi
amplifiers and new DSi-8M System Monitor
Switch-mode universal power supply
All products fill 2U rack spaces and weigh under 19 pounds
Barrier strip outputs, removable Phoenix-style input
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
and guarantees its specifications

The Crown? DSi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply. A rear-panel HD-15 connector shall
provide input/output connectivity between the DSi amplifi er and the DSi-8M
System Monitor.
The outputs shall be usable as stereo or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, fl ashes when a very low-level
signal is present at input.
?10 Indicator: Green LED flashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED flashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or
excessive temperature conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker.
HiQnet USB Connector: Type B, connects to a HiQnet network.
HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Stereo (per channel): 700W with 1% THD, 4 ohm Stereo
(per channel): 500W with 0.5% THD, 8 ohm Stereo (per channel) 275W with
0.5% THD, 4 ohm Bridge-Mono: 1,400W with 1% THD, 8 ohm Bridge-Mono:
1,000W with 0.5% THD.
Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity at 8 ohm rated output: 2.35V.
Sensitivity at 4 ohm rated output: 2.24V.
Sensitivity at 2 ohm rated output: 1.88V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
EQ: 6 parametric fi lters per channel with adjustable Q, boost/cut ±15 dB. Also
adjustable high and low shelving fi lters.
Filters: Highpass and lowpass per channel. Butterworth 12/18 dB per octave
and Linkwitz-Riley 24 dB per octave. High and low shelving fi lters, one per
channel.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 5 user-defi nable loudspeaker presets and 15 factory-default JBL
system presets.
Protection shall include the following:
DSi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg)

Features:

• Balanced phoenix style input connectors – makes installation easy.
• A phoenix style connector block for all output modes.
• Bridge mode operation on all multi channel models provide power flexibility.
• Switch selectable hi-pass filter at either 50Hz or 300Hz meets any installation requirement.
• Independent rear panel level controls provided for each channel
• Integrated "rack ears” allow for rack mounting without additional accessories.

Technical Data:

• Output: 2x 450W/4Ohm RMS, 2x 220W/8Ohm RMS
• Dimensions: 483mm x 88mm x 406mm
• Weight: 16,5 kg

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 900 W, 4 Ω - 600 W, 8 Ω - 380 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1700 W, 4 Ω - 950 W, 8 Ω - 480 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1800 W, 8 Ω - 1200 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 14.8 kg (32.6 lbs)

Weight3.3 kg12.00 kg13.00 kg10.00 kg16.50 kg14.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.3 kg
Weight 12.00 kg
Weight 13.00 kg
Weight 10.00 kg
Weight 16.50 kg
Weight 14.80 kg