OMNITRONIC XPA-1000 Class AB Αmplifier Limiter, 2x500W RMS 4Ohm

Original price was: €486.07.Current price is: €381.92. incl. GR VAT

Only 2 left in stock (can be backordered)

EAN: 4026397593891
Installments calculation
CompareAdd to wishlist Submit Better Price
10451033 OMNITRONIC XPA-1000 Class AB Αmplifier, limiter, 2x500W RMS 4Ohm 2 operating modes can be selected (stereo or bridged) 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Signal inputs via XLR or 6.3mm jack connectors Speaker outputs via lockable speaker jacks and pairs of screw […]

 

Read more

10451033 OMNITRONIC XPA-1000 Class AB Αmplifier, limiter, 2x500W RMS 4Ohm
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
  • Signal inputs via XLR or 6.3mm jack connectors
  • Speaker outputs via lockable speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Class AB circuitry
  • Highly efficient Air flow from front to rear
  • The device is cooled by temperature-controlled fan
  • (19″) 48.3 cm rack installation 2 U
Power supply: 115/230 V AC, 50/60 Hz
Power consumption: 710 W 1/8 power
Output power: 2 x 500 W RMS (4 ohms)
2 x 375 W RMS (8 ohms)
1000 W RMS bridged (8 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Frequency range: 20 – 20000 Hz
S/N ratio: >95 dB
THD: <0,5 % at 1 kHz
Cooling: 2 x temperature-controlled fan , Air flow from front to rear
Impedance: Input: 20 kOhm , bal.
Input: 10 kOhm , unbal.
Circuitry: Class AB
Slew rate: >20 V/µs
Damping factor: >350
Control elements: Power switch, level control per channel, groundlift selector, limiter selector, mode switch (stereo/bridged)
Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart
Status LED: Power, level meter, clip, bridged, protect
Connections: Input: line via 2 x 3-pin XLR
Input: line via 2 x 6.3 mm jack socket (mono) mounting version
Output: speaker via 2 x speaker built-in socket (F)
Output: Speaker (bridge) via 1 x speaker built-in socket (F)
Output: speaker via screw terminal
Output: Speaker (bridge) via screw terminal
Input sensitivity: 1,4 V
Max. level: Input: +21 dBV
Input: +9 V
Housing design: (19″) 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm
Depth: 35,4 cm
Height: 8,9 cm
Weight: 9,05 kg
Weight 9.09 kg

Reviews

There are no reviews yet.

Be the first to review “OMNITRONIC XPA-1000 Class AB Αmplifier Limiter, 2x500W RMS 4Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

OMNITRONIC XPA-1000 Class AB Αmplifier Limiter, 2x500W RMS 4Ohm removeINTERM L-1400 AMPLIFIER 2X450W removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeAMERICAN AUDIO VLP-600 Power Amplifier 2x300 Watts removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts remove
NameOMNITRONIC XPA-1000 Class AB Αmplifier Limiter, 2x500W RMS 4Ohm removeINTERM L-1400 AMPLIFIER 2X450W removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER removePHONIC MAX-1500 PLUS v.10 Power Amplifier 2x450W removeAMERICAN AUDIO VLP-600 Power Amplifier 2x300 Watts removeAMERICAN AUDIO VLP-300 Power Amplifier 2x150 Watts remove
ImageOMNITRONIC XPA-1000 Class AB PA amplifier with limiter, 2 x 500 W RMS (4 ohms), 2 x 375 W RMS (8 ohms)
SKUXPA-1000L-1400DSI-1000H06PH00016E002985E004734
Rating
Price Original price was: €486.07.Current price is: €381.92. incl. GR VAT Original price was: €1,193.61.Current price is: €1,075.00. incl. GR VAT Original price was: €967.20.Current price is: €824.00. incl. GR VAT Original price was: €397.00.Current price is: €350.00. incl. GR VAT Original price was: €500.00.Current price is: €470.00. incl. GR VAT Original price was: €400.00.Current price is: €389.00. incl. GR VAT
Stock

Only 2 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityOnly 2 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content10451033 OMNITRONIC XPA-1000 Class AB Αmplifier, limiter, 2x500W RMS 4Ohm
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
  • Signal inputs via XLR or 6.3mm jack connectors
  • Speaker outputs via lockable speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Class AB circuitry
  • Highly efficient Air flow from front to rear
  • The device is cooled by temperature-controlled fan
  • (19") 48.3 cm rack installation 2 U
Power supply: 115/230 V AC, 50/60 Hz
Power consumption: 710 W 1/8 power
Output power: 2 x 500 W RMS (4 ohms) 2 x 375 W RMS (8 ohms) 1000 W RMS bridged (8 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >95 dB
THD: <0,5 % at 1 kHz
Cooling: 2 x temperature-controlled fan , Air flow from front to rear
Impedance: Input: 20 kOhm , bal. Input: 10 kOhm , unbal.
Circuitry: Class AB
Slew rate: >20 V/µs
Damping factor: >350
Control elements: Power switch, level control per channel, groundlift selector, limiter selector, mode switch (stereo/bridged)
Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart
Status LED: Power, level meter, clip, bridged, protect
Connections: Input: line via 2 x 3-pin XLR Input: line via 2 x 6.3 mm jack socket (mono) mounting version Output: speaker via 2 x speaker built-in socket (F) Output: Speaker (bridge) via 1 x speaker built-in socket (F) Output: speaker via screw terminal Output: Speaker (bridge) via screw terminal
Input sensitivity: 1,4 V
Max. level: Input: +21 dBV Input: +9 V
Housing design: (19") 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm Depth: 35,4 cm Height: 8,9 cm
Weight: 9,05 kg
L1400 450W-450W 4ohm (280W-280W8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

Engineered from the ground up for unmatched quality and performance,
the Crown? DSi Series of power amplifiers offers three models of 500W,
800W, and 1200W per channel at 4 ohms. Onboard digital signal processing
includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15
connector provides easy input/output connectivity between DSi amplifiers
and the new DSi-8M System Monitor.
The intuitive front panel LCD screen guides installers through a setup process?
featuring presets for the industry-standard JBL cinema loudspeaker systems?
to make configuration quick and easy.
At the touch of a button, Crown?s DSi cinema amplifiers deliver perfectly matched
performance with each award-winning JBL ScreenArray? system, making this the
ultimate cinema solution.

Features :
Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
Automatic presets for popular JBL cinema speaker systems for quick, easy
configuration
Intuitive front-panel LCD screen guides installers through setup
Onboard digital signal processing includes crossovers, EQ filters, delay, and
output limiting
Computer connectivity via USB allows fast setup and configuration with HiQnet?
System Architect? software
Rear-panel HD-15 connector provides easy input/output connectivity between DSi
amplifiers and new DSi-8M System Monitor
Switch-mode universal power supply
All products fill 2U rack spaces and weigh under 19 pounds
Barrier strip outputs, removable Phoenix-style input
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
and guarantees its specifications

The Crown? DSi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply. A rear-panel HD-15 connector shall
provide input/output connectivity between the DSi amplifi er and the DSi-8M
System Monitor.
The outputs shall be usable as stereo or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, fl ashes when a very low-level
signal is present at input.
?10 Indicator: Green LED flashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED flashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or
excessive temperature conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker.
HiQnet USB Connector: Type B, connects to a HiQnet network.
HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Stereo (per channel): 700W with 1% THD, 4 ohm Stereo
(per channel): 500W with 0.5% THD, 8 ohm Stereo (per channel) 275W with
0.5% THD, 4 ohm Bridge-Mono: 1,400W with 1% THD, 8 ohm Bridge-Mono:
1,000W with 0.5% THD.
Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity at 8 ohm rated output: 2.35V.
Sensitivity at 4 ohm rated output: 2.24V.
Sensitivity at 2 ohm rated output: 1.88V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
EQ: 6 parametric fi lters per channel with adjustable Q, boost/cut ±15 dB. Also
adjustable high and low shelving fi lters.
Filters: Highpass and lowpass per channel. Butterworth 12/18 dB per octave
and Linkwitz-Riley 24 dB per octave. High and low shelving fi lters, one per
channel.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 5 user-defi nable loudspeaker presets and 15 factory-default JBL
system presets.
Protection shall include the following:
DSi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg)

Phonic's MAX 1500 Power Amplifier provides 900 Watts of power at 8 ohms (bridge mono) or 450 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX 1500 amp is achieved via XLR or phone jack, and output is achieved either through Speakon-type connectors or traditional binding posts. The MAX 1500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 450W @ 4 Ohms stereo, 280W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting

VLP Series Powere Amplifier

 

Output Power: 300W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 200W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD (Bridge Mode, Mono) 600W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 300

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift Limiter

Dimensions (LxWxH): 14" x 19" x 3.5" / 360 x 482 x 88mm 2-rack mount spaces

Weight: 33 lbs. / 15 Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift; Limiter

VLP Series Power Amplifier


Output Power:
- 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
(Bridge Mode, Mono)
- 300W RMS @ 8 Ohms, 1K Hz, 1% THD

Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)

Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz

Slew Rate: 15V Per usec

Damping Factor @ 8 Ohm: 260

Impedance: 20 Ohms balanced / 10 Ohms unbalanced

Cooling System: 2 indivdual fans

Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift

Dimensions (LxWxH): 13.25" x 19" x 1.75" / 336 x 482 x 44mm (1-rack mount space)

Weight: 24 lbs. / 11Kgs.

Special Features: High/Low Pass Filter; Input Sensitivity Selector; Ground Lift

Weight9.09 kg14.40 kg10.00 kg16.00 kg15.00 kg11.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 9.09 kg
Weight 14.40 kg
Weight 10.00 kg
Weight 16.00 kg
Weight 15.00 kg
Weight 11.00 kg