OMNITRONIC XPA-1200 Class AB Αmplifier Limiter, 2x610W RMS 4Ohm

Original price was: €520.00.Current price is: €489.80. incl. GR VAT

Available on backorder

EAN: 4026397593907
Installments calculation
CompareAdd to wishlist Submit Better Price
10451034 OMNITRONIC XPA-1200 Class AB PA amplifier with limiter, 2 x 610 W RMS (4 ohms), 2 x 420 W RMS (8 ohms) 2 operating modes can be selected (stereo or bridged) 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Signal inputs via XLR or […]

 

Read more

10451034 OMNITRONIC XPA-1200 Class AB PA amplifier with limiter, 2 x 610 W RMS (4 ohms), 2 x 420 W RMS (8 ohms)
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
  • Signal inputs via XLR or 6.3mm jack connectors
  • Speaker outputs via lockable speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Class AB circuitry
  • Highly efficient Air flow from front to rear
  • The device is cooled by temperature-controlled fan
  • (19″) 48.3 cm rack installation 2 U
  • For application areas such as: Clubs/dancing school; Installation; mobile use; mobile djs / entertainer; restaurants, bars and hotels; Rental; sports centres/gyms

Package contents

  • 1 x amplifier, 1 x user manual, 1 x power cord, 4 x foot, 4 x screw
Power supply: 115/230 V AC, 50/60 Hz
Power consumption: 800 W 1/8 power
Output power: 2 x 610 W RMS (4 ohms)
2 x 420 W RMS (8 ohms)
1200 W RMS bridged (8 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Frequency range: 20 – 20000 Hz
S/N ratio: >95 dB
THD: <0,5 % at 1 kHz
Cooling: 1 x temperature-controlled fan , Air flow from front to rear
Impedance: Input: 20 kOhm , bal.
Input: 10 kOhm , unbal.
Circuitry: Class AB
Slew rate: >20 V/µs
Damping factor: >350
Control elements: Power switch, level control per channel, groundlift selector, limiter selector, mode switch (stereo/bridged)
Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart
Status LED: Power, level meter, clip, bridged, protect
Connections: Input: line via 2 x 3-pin XLR
Input: line via 2 x 6.3 mm jack socket (mono) mounting version
Output: speaker via 2 x speaker built-in socket (F)
Output: speaker via screw terminal
Input: Speaker (bridge) via 1 x speaker built-in socket (F)
Output: Speaker (bridge) via screw terminal
Input sensitivity: 1,4 V
Max. level: Input: +21 dBV
Input: +9 V
Housing design: (19″) 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm
Depth: 35,4 cm
Height: 8,9 cm
Weight: 11,90 kg

Weight 12.5 kg

Reviews

There are no reviews yet.

Be the first to review “OMNITRONIC XPA-1200 Class AB Αmplifier Limiter, 2x610W RMS 4Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

OMNITRONIC XPA-1200 Class AB Αmplifier Limiter, 2x610W RMS 4Ohm removeRAM AUDIO S-2000 Power Amplifier 2x1190 Watts removePHONIC MAX-2500 PLUS Power Amplifier 2x750W removeDYNACORD DSA-8206 2 CHAN POWER AMPLFIER 2X900W/2Ω - 2X600W/4Ω - 2X380W/8Ω removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removeYAMAHA PC-3301N Power Amplifier 2x400W remove
NameOMNITRONIC XPA-1200 Class AB Αmplifier Limiter, 2x610W RMS 4Ohm removeRAM AUDIO S-2000 Power Amplifier 2x1190 Watts removePHONIC MAX-2500 PLUS Power Amplifier 2x750W removeDYNACORD DSA-8206 2 CHAN POWER AMPLFIER 2X900W/2Ω - 2X600W/4Ω - 2X380W/8Ω removeLD Systems DEEP2 1600 PA Power Amplifier 2 x 800 W 2 Ohms removeYAMAHA PC-3301N Power Amplifier 2x400W remove
Imagexpa-1200 xpa1200 amplifier omnitronic 2x610w ab stereo
SKUXPA-1200S-2000H06PH00017E009303LDDP1600H060.00036
Rating
Price Original price was: €520.00.Current price is: €489.80. incl. GR VAT Original price was: €1,587.20.Current price is: €1,254.88. incl. GR VAT Original price was: €499.00.Current price is: €449.00. incl. GR VAT Original price was: €1,123.20.Current price is: €872.00. incl. GR VAT Original price was: €880.00.Current price is: €750.00. incl. GR VAT Original price was: €1,881.00.Current price is: €1,655.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content10451034 OMNITRONIC XPA-1200 Class AB PA amplifier with limiter, 2 x 610 W RMS (4 ohms), 2 x 420 W RMS (8 ohms)
  • 2 operating modes can be selected (stereo or bridged)
  • 2 level controls
  • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
  • Signal inputs via XLR or 6.3mm jack connectors
  • Speaker outputs via lockable speaker jacks and pairs of screw terminals
  • Additional Speaker plug for 8-ohm bridge operation
  • Class AB circuitry
  • Highly efficient Air flow from front to rear
  • The device is cooled by temperature-controlled fan
  • (19") 48.3 cm rack installation 2 U
  • For application areas such as: Clubs/dancing school; Installation; mobile use; mobile djs / entertainer; restaurants, bars and hotels; Rental; sports centres/gyms

Package contents

  • 1 x amplifier, 1 x user manual, 1 x power cord, 4 x foot, 4 x screw
Power supply: 115/230 V AC, 50/60 Hz
Power consumption: 800 W 1/8 power
Output power: 2 x 610 W RMS (4 ohms) 2 x 420 W RMS (8 ohms) 1200 W RMS bridged (8 ohms)
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >95 dB
THD: <0,5 % at 1 kHz
Cooling: 1 x temperature-controlled fan , Air flow from front to rear
Impedance: Input: 20 kOhm , bal. Input: 10 kOhm , unbal.
Circuitry: Class AB
Slew rate: >20 V/µs
Damping factor: >350
Control elements: Power switch, level control per channel, groundlift selector, limiter selector, mode switch (stereo/bridged)
Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart
Status LED: Power, level meter, clip, bridged, protect
Connections: Input: line via 2 x 3-pin XLR Input: line via 2 x 6.3 mm jack socket (mono) mounting version Output: speaker via 2 x speaker built-in socket (F) Output: speaker via screw terminal Input: Speaker (bridge) via 1 x speaker built-in socket (F) Output: Speaker (bridge) via screw terminal
Input sensitivity: 1,4 V
Max. level: Input: +21 dBV Input: +9 V
Housing design: (19") 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm Depth: 35,4 cm Height: 8,9 cm
Weight: 11,90 kg

The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment.

In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.

• Ultra-compact and lightweight 2-U high
• Laser cut aluminum front panels with integrated carrying handles
• Neutrik® XLR input connectors, input and signal link in 2 channel models
• Input Link switch: allow daisy-chaining of the input signal
• Neutrik® Speakon® output connectors
• Detented sealed potentiometers for easy recall of volume settings
• ICL™, PMS™, Hi-temp, Signal indicators per channel
• Power on and Stand-by leds
• Highly versatile with multiple configuration and additional module options
• Full PC control via EtheRAM (with EtheRAM Control module)
• Switchable ICL™ clip-limiters per channel
• Switchable (30-50 Hz) sub-sonic highpass filter per channel
• Three-position gain selector (26, 32 or 38 dB)
• Dual or bridge mode selector
• Twin temperature controlled, back to front cooling fans
• Oversized power components (high SOA reserve specification)
Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility.

Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics:
• 2-way stereo crossover (dual mono or single bridged sub output)
• 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz)
• Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB)
• Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB)


DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics:
• 4 Inputs/4 Outputs or 2 In/2 Out free route configurable.
• 24 bits/192 kHz 256x Oversampling Converters.
• Output Delay: 0 to 7.1 meters (20.69ms) per channel.
• XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel.
• EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB).
• Gain, Mute and Phase inversion per channel.
• RMS Power and Peak Voltage output limiter per channel.
• Real Time operation from USB or front panel configuration.


Standard Signal Inputs Module
EtheRAM Control Module
Ethernet Audio Transport (Coming soon)
Analog Processor Module
DSP44_S Module
EtheRAM Control Module
AES/EBU Digital Input (Coming soon)

OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz
Phase Response (@1W 20Hz-20kHz): ±15deg
Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB
Voltage Gain (selectable): 26/32/38 dB
Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V
3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V
Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB
3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB
Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A
3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A
Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches
Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs

Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Phonic\'s MAX 2500 Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 amp is achieved via combo connectors that accept both XLR and 1/4\' jacks, and output is achieved through either Speakon?-type connectors or binding posts. The MAX 2500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
  • Output power: 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
  • High-current toroidal transformers for greater power and low noise
  • Independent user-defeatable peak limiters reduce distortion
  • Selectable High-Pass filter at 30Hz or 50Hz
  • XLR and 1/4\' TRS input jacks
  • Binding post and Speakon?-type outputs
  • Front mounted gain controls for easy access
  • Signal and Peak LED indicators to monitor performance
  • Short circuit, thermal, subsonic, RF protection, output DC offset
  • Power on/off muting


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight12.5 kg8.00 kg18.00 kg14.80 kg15.90 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 12.5 kg
Weight 8.00 kg
Weight 18.00 kg
Weight 14.80 kg
Weight 15.90 kg
Weight 13.00 kg