OMNITRONIC XPA-3004 4ch PA Amplifier, Limiter 4x750W/4Ohm

Original price was: €959.01.Current price is: €742.75. incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4026397594959
Installments calculation
CompareAdd to wishlist Submit Better Price
10451038 4-channel PA amplifier with integrated limiter, 4 x 750 W / 4 ohms, 4 x 500 W / 8 ohms 3 operating modes can be selected (stereo, parallel or bridged) Input sensitivity adjustable Level control per channel Each channel with LED for activated protective circuit (protect) and output meter with clip LED Signal inputs […]

 

Read more

10451038 4-channel PA amplifier with integrated limiter, 4 x 750 W / 4 ohms, 4 x 500 W / 8 ohms

  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Input sensitivity adjustable
  • Level control per channel
  • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
  • Signal inputs via XLR connectors
  • Speaker outputs via lockable Speaker plugs
  • Class H circuitry
  • Highly efficient Air flow from front to rear
  • The device is cooled by temperature-controlled fan
  • (19″) 48.3 cm rack installation 2 U
Power supply: 230 V AC, 50 Hz
Power consumption: 700 W 1/8 power
Output power: 4 x 750 W RMS (4 ohms)
4 x 500 W RMS (8 ohms)
2 x 1500 W RMS bridged (8 ohms)
Power connection: Mains input via P-Con (blue), mounting version power supply cord with safety plug (provided)
Frequency range: 20 – 20000 Hz
S/N ratio: >100 dB
THD: <0,5 % at 1 kHz
Cooling: 2 x temperature-controlled fan , Air flow from front to rear
Impedance: Input: 20 kOhm , bal.
Input: 10 kOhm , unbal.
Circuitry: Class H
Slew rate: >10 V/µs
Damping factor: >200
Control elements: Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch
Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart; power on/off transient
Status LED: Power, level meter, clip, bridged, protect
Connections: Input: line via 4 x 3-pin XLR
Output: speaker via 4 x speaker built-in socket (F)
Output: Speaker (bridge) via 2 x speaker built-in socket (F)
Input sensitivity: 0,775 V; 1,4 V , switchable
Housing design: (19″) 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm
Depth: 41,5 cm
Height: 8,9 cm
Weight: 19,20 kg

Weight 20 kg

Reviews

There are no reviews yet.

Be the first to review “OMNITRONIC XPA-3004 4ch PA Amplifier, Limiter 4x750W/4Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

OMNITRONIC XPA-3004 4ch PA Amplifier, Limiter 4x750W/4Ohm removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeLAB GRUPPEN C 16-4 Power Amplifier 4x400 Watts removeYAMAHA XM-4180 Power Amplifier 4x180W removeYAMAHA XM-4080 Power Amplifier 4x80W removeCROWN CT-875 POWER POWER AMPLIFIER 8x75W/8Ω remove
NameOMNITRONIC XPA-3004 4ch PA Amplifier, Limiter 4x750W/4Ohm removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeLAB GRUPPEN C 16-4 Power Amplifier 4x400 Watts removeYAMAHA XM-4180 Power Amplifier 4x180W removeYAMAHA XM-4080 Power Amplifier 4x80W removeCROWN CT-875 POWER POWER AMPLIFIER 8x75W/8Ω remove
ImageOMNITRONIC XPA-3004 4-channel PA amplifier with integrated limiter, 4 x 750 W / 4 ohms, 4 x 500 W / 8 ohms
SKUXPA-3004S-4004C16-4H060.00038H060.00045CT-875
Rating
Price Original price was: €959.01.Current price is: €742.75. incl. GR VAT Original price was: €2,343.59.Current price is: €1,920.75. incl. GR VAT Original price was: €3,334.36.Current price is: €3,162.00. incl. GR VAT Original price was: €1,850.00.Current price is: €1,725.00. incl. GR VAT Original price was: €993.00.Current price is: €957.73. incl. GR VAT Original price was: €2,171.01.Current price is: €1,846.00. incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

10451038 4-channel PA amplifier with integrated limiter, 4 x 750 W / 4 ohms, 4 x 500 W / 8 ohms

  • 3 operating modes can be selected (stereo, parallel or bridged)
  • Input sensitivity adjustable
  • Level control per channel
  • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
  • Signal inputs via XLR connectors
  • Speaker outputs via lockable Speaker plugs
  • Class H circuitry
  • Highly efficient Air flow from front to rear
  • The device is cooled by temperature-controlled fan
  • (19") 48.3 cm rack installation 2 U
Power supply: 230 V AC, 50 Hz
Power consumption: 700 W 1/8 power
Output power: 4 x 750 W RMS (4 ohms) 4 x 500 W RMS (8 ohms) 2 x 1500 W RMS bridged (8 ohms)
Power connection: Mains input via P-Con (blue), mounting version power supply cord with safety plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >100 dB
THD: <0,5 % at 1 kHz
Cooling: 2 x temperature-controlled fan , Air flow from front to rear
Impedance: Input: 20 kOhm , bal. Input: 10 kOhm , unbal.
Circuitry: Class H
Slew rate: >10 V/µs
Damping factor: >200
Control elements: Power switch, level control per channel, mode switch (stereo/parallel/bridged), Input sensitivity switch
Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart; power on/off transient
Status LED: Power, level meter, clip, bridged, protect
Connections: Input: line via 4 x 3-pin XLR Output: speaker via 4 x speaker built-in socket (F) Output: Speaker (bridge) via 2 x speaker built-in socket (F)
Input sensitivity: 0,775 V; 1,4 V , switchable
Housing design: (19") 48.3 cm rack installation 2 U
Dimensions: Width: 48,3 cm Depth: 41,5 cm Height: 8,9 cm
Weight: 19,20 kg

  The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon)
OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

The C 16:4 is one of two mid-power, four-channel amplifiers in the C Series family. Attractively packaged in a 2U chassis, it provides 4 × 400 W output into 4 ohm loads.

C Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL™), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 100/70 V loudspeakers. VPL works in combination with adjustable input gain to achieve maximum headroom regardless of input levels or output impedances.

Every C Series is ready for the NomadLink® network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is under network control.

Specifications C 16:4

General
Number of channels 4
Peak total output all channels driven 1600 W
Peak output voltage per channel 141 V
Max. output current per channel 8.5 Arms
Max. Output Power 16 ohms 8 ohms 4 ohms 2 ohms Hi-Z
Per ch. (all ch.’s driven) 400 W 400 W 300 W n.r. 400 W (70 Vrms / 100 V peak)
Bridged per ch. 800 W 600 W n.r. n.r. 800 W (140 Vrms / 200 V peak)
Performance with Gain: 35 dB and VPL: 100 V
THD 20 Hz - 20 kHz for 1 W 70 dB
Frequency response (1 W into 8 ohms) +0/-3 dB 6.8 Hz - 34.2 kHz
Input impedance 20 kOhm
Input Common Mode Rejection, CMR 50 dB
Output impedance @ 100 Hz 30 mOhm
Voltage Peak Limiter (VPL), max. peak output
VPL, selectable per ch. 3) 141, 118, 100, 85, 71, 59, 50, 42 V
VPL, selectable when bridged 3) 1) 282, 236, 200, 170, 142, 118, 100, 84 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Gain and Level
Amplifier gain selectable (all channels) 1)
– rear-panel switches
23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 35 dB
Level adjustment (per ch.) Front-panel potentiometer, 21 position detented from -inf to 0 dB, hidden behind security panel/dust filter grille
Connectors and switches
Input connectors (per ch.) 3-pin Phoenix, electronically balanced
Output connectors (per ch.) Barrier strip 2-pole screw terminals
Output bridge mode A+B and/or C+D, inputs A and C are input source
NomadLink® network On board, 2 x RJ45 connectors
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Two fans, front-to-rear airflow, temperature controlled speed
Front-panel indicators
Common NomadLink® Network; Power Average Limiter (PAL) 2); Power on
Per channel
Signal present / High-impedance; -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL);
Very High Frequency (VHF); High Temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 130 -265 V / 65-135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 2) Yes
Soft start / Inrush current draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 20 A / NEMA 5-20P
Dimensions (W/H/D) W: 483 mm (19”), H: 88 mm (2 U), D: 343 mm (13.5”)
Weight 12 kg (26.4 lbs.)
Finish Black painted steel chassis with gray painted steel front
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
Note 1): Automatic -6 dB gain compensation when bridging channels. Ch.’s A+B and/or C+D, can be bridged individually.
Note 2): PAL can reduce the maximum output power to keep the power supply operating safely, and/or to prevent excessive current draw tripping the mains breaker.
Refer to Operation Manual.
Note 3): For sine waves, peak voltage output values translate to Vrms with the formula V/1.41 = Vrms. E.g. 100 V peak equals app. 70 Vrms.
Hence, outputs can be set for high-impedance loads without requiring a transformer.
All specifications are subject to change without notice.

The XM series multi-channel power amplifiers are ideal for theater, hall, and conference room installations. The lineup includes 80W × 4 and 180W × 4 models, meeting the needs of a wide variety of installed systems. The XM amplifiers are a compact 2U size and surprisingly lightweight, making them easy to handle and install. Switching power supplies deliver high output power while minimizing the unit's physical size. The XM series has monitor/remote jacks that allow external devices to be connected for status monitoring or control from a remote location.

Dimensions (W x H x D): 480 x 88 x 412 mm, Weight: 10 kg

  • Four high-power channels.
  • Switchable stereo, parallel, or bridged operation.
  • Versatile connectivity and high-pass filters for a variety of applications.
  • Distribution drive capability for parallel multi-speakers systems (XM4180).
  • Monitor/Remote connector for remote monitoring and control.
  • Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 8Ω 80W x 4
    Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 4Ω 115W x 4
    Sensitivity, RL=8. Att.max +4dB
    S/N Ratio, 20Hz-20kHz (DIN AUDIO) 100dB
    Idle Power Consumption 40W
    1/8 Power Consumption (4Ω) 500W
    Power Bandwidth, (Half power THD+N=0.5%) 10Hz – 40kHz
    Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
    Frequency Response, f=20Hz-20kHz -0.5dB, 0dB, 0dB
    Residual Noise, 20Hz-20kHz(DIN AUDIO) -70dB
    Voltage Gain, 8Ω, f=1kHz 100
    Sensitivity, ATT. max 26dB
    Maximum Input Voltage 22dB
    Input Impedance 30kΩ (balance) 15kΩ (unbalance)
    Controls, Front panel POWER switch (push on/push off), attenuator (31position) x 4
    Controls, Rear panel MODE switch (STEREO/BRIDGE/PARALLEL) x 2 HPF switch (OFF/20Hz/55Hz 12dB/oct) x 2
    Connectors, Output 5–way binding post/ch
    Connectors, DATA PORT D-sub15P, Monitor:Output Level/ch,Active/ch, Model Detect Control:Mute/ch
    Connectors, Power AC inlet x 1
    Indicators, POWER x 1 (Green)
    Indicators, SIGNAL x 4(Green)
    Indicators, CLIP/LIMIT x 4 (Red)
    Indicators, PROTECT/MUTE x 4 (Red)
    Load Protection POWER switch on/off mute, DC-fault output relay off
    Power Requirements UC: 120V / 60Hz,
    Weight 10kg (22 lbs.)
    Dimensions (W x H x D) 480 x 88 x 412.2 mm (18-7/8" x 3-7/16" x 16-1/4“) 

    Model    CT475
    Product Type    Amplifier
    Channels    4
    Sensitivity    1.4V
    Rated Power Output    75W per Channel into 8 ohms
    Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
    Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
    Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
    Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
    Dimension (H x W x D)    1.75" x 19" x 14.25“
    Weight    10 lbs (4.5 kg)

      

    Weight20 kg8.50 kg12.00 kg10.00 kg10.00 kg4.50 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 20 kg
    Weight 8.50 kg
    Weight 12.00 kg
    Weight 10.00 kg
    Weight 10.00 kg
    Weight 4.50 kg