| Content |
Add Dynamic Hi-Fi Sound to Your Entertainment Mix
Delivering 110 W/Ch of high-current power from a fully discrete low-impedance amplification system, the TX-8130 plays your audio sources with dynamic energy and pure musicality. Custom-spec components are used throughout, from high-current EI transformer, twin 8,200 μF capacitors, and rigid oval chassis to the 384 kHz/32-bit DAC that decodes Hi-Res 192/24 and 5.6 MHz DSD files streamed over the network.
Whether enjoying Spotify, Deezer, or TuneIn Radio (with song selection handled via remote app) or kicking back with a stack of LPs, listeners are rewarded with lush, detailed, and deeply satisfying sound that few amps at this price can equal. Other details such as BGM presets for one-touch playback of AM/FM/Internet Radio stations, generous analog/digital connectivity, and rock-solid build will confirm your impression of quality, value, and versatility.
Features
HIGHLIGHTS
- 100 W/Ch Hi-Current Amplification System
- Bluetooth® Audio Streaming Technology for Almost Any Device
- DAB+ and FM/RDS Radio Tuners with 40 Station Presets
- MM Phono, Analog, and Digital Audio Inputs
- Hi-Current Discrete Amplification System
ADVANCED FEATURES
- 100 W/Ch Stereo Power (6 Ω, 1 kHz, 10%, 1 Channel Driven, IEC)
- Stream from Mobiles, Smartphones, Tablets, Laptops, and PC via Bluetooth Version 4.1 (A2DP/AVRCP)
- with Bluetooth Standby and Auto Connect Functions
- DAB+ and FM/RDS Radio Tuners with 40-Station Memory Presets
- Radio Station Preset Naming (Up to 8 Characters)
- WRAT (Wide Range Amplifier Technology) with Massive Hi-Current EI Transformer,
- Custom Power Capacitors, and Low Impedance Drive
- Non-Phase-Shift Amp Circuitry with Discrete Power Transistors
- Optimum Gain Volume Circuitry
- 192 kHz/24-bit* (PCM1754) Digital-to-Analog Converter
- Direct Mode for Source-Authentic Audio Reproduction
* 96 kHz/24-bit D/A conversion
CONNECTION FEATURES
- 2 Digital Audio Inputs (1 Optical and 1 Coaxial)
- 4 Analog RCA Inputs and 1 Line Output
- Phono Input with MM Equalizer
- Subwoofer Pre-Out
- Two Pairs of Speaker Posts with Screw Knobs
- 6.35 mm Headphone Jack
Dimensions (W x H x D) 435 x 149 x 328 mm
Weight 7.0 kg
CARTON Dimensions (W x H x D) 533 x 234 x 401 mm
Weight 8.8 kg
|
Class XD™ amplification designed to eliminate crossover distortion at low signal levels
New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms.
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers
A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box
CAP5 protection technology for trouble free operation
Acoustically damped full metal chassis with thick brushed aluminium front panel
Customisable front panel display
Balanced and unbalanced analogue audio inputs for superior connectivity
RS232 controllable
Eco-friendly Available in black and silver finishes
![]()
|
| Audio Connectivity Features |
|---|
| Analog Audio Input (Rear) | 5 | | Phono Input | 1 |
| FM Tuner Features |
|---|
| Frequency Range MHz | 87.5 MHz | | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | | Distortion (Mono/Stereo) | 0.2%/0.3% | | Stereo Separation @ 1kHz | 40 dB | | Selectivity ±400kHz | 70 dB | | AM Tuner Specifications |
|---|
| Frequency Range kHz | 520 kHz | | Signal-to-Noise Ratio | 38 dB | | Usable Sensitivity (Loop) | 500 μV | | Selectivity | (±10 kHz): 30 dB | | Distortion | (1 kHz, 50% mod): 1.0% | | General Specifications |
|---|
| Power Requirement | 120V AC, 60Hz (USA); 220V – 240V AC, 50Hz/60Hz (EU) | | Power Consumption (full power/idle) | 310W maximum, | | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | |
Technical Specifications
Continuous power output, per channel, 8Ω
- Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
- Single, 4Ω, at 1kHz - 400W
Inputs
- Nominal sensitivity for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
- Input impedance - 10kΩ
- Frequency response 20Hz-20kHz +/- 0.05dB
- Signal/noise ratio (Awtd) 50W / 8Ω - 110dB
General
- Power consumption (standby) -
|
Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.
|
Technical specification
|
| |
|
Integrated Amplifier
| |
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
| |
Total harmonic distortion (THD):
|
1 % (1 kHz)
| |
Signal-to-noise ratio:
|
92 dB
| |
Input Impedance:
|
100 kOhm
| |
|
| |
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
| |
Dimensions W x H x D:
|
440 x 220 x 390 mm
| |
Weight:
|
28 kg
| |
Accessories:
|
Remote Control
| |
Input Terminals:
|
Tape, CD, AUX, Tuner
| |
Output terminals:
|
Tape out
| |
Circiut:
|
Class A/B P.P.
| |
Colour:
|
Chassis chrome, transformer black
| |
Colour front:
|
black, silver
| |
Sensitivity
|
590 mV
| |
Output Impedance:
|
4 Ohm, 8 Ohm
| |
Power Output:
|
2 x 70 Watt @ 1 % THD
| |
Consumption:
|
max. 380 Watt
| |
Highlights
|
switchable reduction of feedback
|
| High sound quality and sophisticated design based on Yamaha\'s rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
- Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
- Pure Direct Mode for greater sound purity
- Simple and sophisticated design
- Phono MM terminal for vinyl playback
- Screw-type speaker terminals
- Speaker selector and speaker terminals for two systems
- Simple design remote control
- Head phone terminal
Specs
Receiver / Integrated Amplifier
| Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) |
140 W + 140 W |
| Maximum Power(8 ohms, 1 kHz, 10% THD) |
100 W + 100 W |
| High Dynamic Power/Channel (8/6/4/2 ohms) |
125 W/150 W/165 W/180 W |
| Frequency Response |
10 Hz-100 kHz(0 ± 0.5 dB / 0 ± 3.0 dB) |
| Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) |
0.2% |
| Signal-to-Noise Ratio (CD) |
100 dB (S: 500 mV) |
| Input Sensitivity (CD) |
500 mV / 47 k-ohms |
| Standby Power Consumption |
0.5 W |
| Dimensions (W x H x D) |
435 x 141 x 333 mm; 17-1/8" x 5-1/2" x 13-1/8“ |
| Weight |
6.7 kg; 14.8 lbs. |
|
Reviews
There are no reviews yet.