| Content | The first high gain amp in the Terror series, the Dark Terror is a true master of saturated distortion, making it an ideal match for Hard Rock players looking for signature Orange ʽchugʼ in a portable package. Featuring the same 15/7 Watt output section as the Tiny Terror, plus the addition of our low impedance, valve buffered effects loop, the key to the amp its high gain preamp section and our exclusive Shape control.
The Shape, which first appeared on our Thunderverb Series, takes your sound from scooped, chunky modern rhythm tones in the fully clockwise position, to a more classic voicing (anticlockwise) with boosted mids and smooth highs, and everywhere in-between. This makes the amp much more versatile than its single channel, three knob layout (and black chassis!) might suggest. The preamp features four stages of gain, becoming increasingly aggressive as you turn the Gain control, reaching truly insane levels of drive. Ignore the clean and crunch tones at your peril, though. There are some tasty Blues tones to be had here! | MINI GUITAR AMP MARSHALL MS-2
1" Speaker, 2 Watts
Volume Tone Control.
Channel Switch (clean/overdrive).
Headphone Out.
Colour: Black, Vintage Look.
Power Supply: 9V Battery or AC adaptor (not included).
Dimensions:
Width: 110 mm
Depth: 60 mm
Height: 140 mm
Weight: 0.34kg |
Product Description
The Marshall MG102CFX provides pure analog Marshall tone. Marshall MG102CFX is a Carbon Fiber outfitted 100 watt 2x12 Combo with FX! With a totally new internal design and approach, the brand new MG Series delivers essential digital features, but with vast superior and programmable analogue tone at its heart.
Innovation, Functionality, Tone - just a few words that help sum up the brand new range of solid-state MG amplifiers from Marshall. Combining years of experience in analogue amplification with cutting-edge digital technology has resulted in the creation of an all-encompassing amplifier series, ideal for the beginner and gigging pro alike.
Specially voiced digital effects, intuitive footswitching technology and four adjustable and storable channels are just a few of the features found in the new MG range. From a punchy 10 watt combo through to an effects laden, soul pounding 100 watt head, this series has it all.
Features
- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 2x12 in. Speakers
- 100 watts
|
Those instantly recognizable, warm British sounds you've come to expect from VOX are alive and well in the compact, 10-Watt Pathfinder 10 combo - plus a high gain capability that's thoroughly modern!
This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.
Little Yet Loud!
The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.
Headphone/Lineout jack
Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.
TOP PANEL FEATURES - Input Jacks. This, believe it or not, is where you plug your guitar into the amp!
- Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.
- Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out“) or Overdrive (switch "in“). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!
- Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.
- Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.
- Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.
- Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.
- Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.
Specification - Circuitry: Solid-State
- Output: 10-Watts RMS
- Speakers: Vox Bulldog x 1 (6.5“, 8 ohm)
- Controls: Gain, Treble, Bass, Volume, Clean/Overdrive Switch, Power On/Off
- Input: Input Jack
- Outputs: Headphone/Line Out Jack
- Dimensions: 380mm(w) x 260mm(h) x 170mm(d) / 14.96“(w) x 10.24“(h) x 6.69“(d)
- Weight: 4.8Kg/10lbs
|
Supercharged to befit the name: The Valvetronix Pro Series. Introducing the new VTX150 Neodymium - the pinnacle of VOX modeling amps.
Main Features
- VTX150 Neodymium features
- Valvetronix Pro Series - the perfect fusion of real tube tone and VOX modeling technology
- Next-generation VOX Valve Reactor circuit features an EL84 Vacuum tube
- 132 Expertly voiced presets
- 44 Song Presets: spot-on recreations of the sounds used on classic tracks
- 44 Basic Amp Model Presets: Valvetronix amp modeling at its robust finest
- 44 Effected Amp Model Presets: created with chorus, flanger and tremolo effects
- 44 Distinct amp models - the most in any Valvetronix amp
- Accurate amp models encompass the entire VOX lineage from the traditional AC30 to the modern Night Train, plus an impressive list of other hard-to-come-by classics and rare hi-gain boutique models
- 25 In-demand, top-quality effects
- 11 Pedal-type effects
- 11 Modulation (chorus, flanger, etc.)/Delay effects with Tap Tempo control
- 3 Reverb styles
- 8 User Programs for saving your custom settings (expandable to 16 using the VC12SV)
- Manual mode relies on the physical knob settings of the amp section
- Amp offers Gain, Volume, and Master Volume; EQ features Treble, Middle, and Bass
- Unique Power Level control can limit the power amp output wattage, creating distinctive power amp distortion at any listening level
- Built-in automatic guitar tuner
- Power level control allows you to adjust the output wattage of the power amp
- Celestion VOX NeoDog neodymium 12" speaker
- Powerful neodymium magnets generate volume levels unimaginable from a compact 150W combo amp
- Extension speaker output jack
- Connect any speaker cabinet (150W / 8Ω) to obtain up to 300W of output power
- Effects Loop for use with an external effects processor
- AUX IN jack lets you connect your CD/MP3 player and enjoy jam sessions
- Headphone output simulates the acoustic and spatial character of a full speaker cabinet
- Optional VC-12SV foot controller (or VFS5) foot switch can control many of the VTX150 Neodymium's functions
Valvetronix Pro VTX150 Specification - Number of amp models: 44
- Number of effects: 25 + Noise reduction
- Number of programs
- Preset: 132
- User: 8 (2 banks x 4 channels) *when using VC-12SV: 16 (4 banks x 4 channels)
- Input/output jacks
- Top panel: INPUT jack, PHONES jack, AUX IN jack
- Rear panel: FOOT SW jack, VOX Bus, Effect loop send/return
- Power amp output:
- maximum 150 W RMS @ 8 ohms (only the VTX150 Neodymium),
- *maximum 300 W RMS @ 4 ohms (when using an extension speaker)
- Speaker: Celestion Vox NeoDog neodymium speaker; 12" / 8 Ω (x1)
- Signal processing: A/D conversion: 24-bit D/A conversion: 24-bit
- Power supply requirements: AC, local voltage
- Power consumption: 83W
- Dimensions (W x D x H): 451 x 261 x 438 mm / 17.76 x 10.28 x 17.24 inches
- Weight: 12.1 kg / 26.68 lbs.
- Included items: Power cable
- Options (sold separately): Foot controller (VOX VC-12SV), Foot switch (VOX VFS5)
|
- 30-watt, 2x12" combo guitar amplifier
- Two channels with independent volume controls — Normal and Top Boost
- Reverb and Tremolo effects onboard (controllable via optional footswitch)
- Master volume section with Tone Cut and Volume controls
- True bypass effects loop for bringing in your own pedals
- Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
- 16-ohm output jack for running a cabinet along with the internal speakers
- Features two 12" 8-ohm Celestion Alnico Blue speakers
- Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
- Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
- Weight: 73.59 lbs.
|
Reviews
There are no reviews yet.