ORANGE TH30 Guitar Valve Amplifier Head 30 Watts

Marshall 1974X 18W Handwired Combo Guitar Amplifier

The 1974X is an authentic re-issue of the fabled model 1974 combo of the late sixties (1966-1968). Just like the original, it boasts a point-to-point, handwired, tagboard circuit housed in an aluminium chassis, plus a valve-driven tremolo circuit. At the very heart of its simple, but effective, two channel design can be found six valves: three ECC83s in the preamp, an EZ81 rectifier and a pair of cathode biased EL84s in the power stage. As the output and mains transformers are vital components in any amplifier as they influence performance, sound and feel, Marshall worked extremely closely with their associates at Dagnall in order to duplicate the original, "off-the-shelf" transformers in all areas.

Another major contributing factor to the distinctive sound of vintage 1974 combos is the way the original 20 Watt, ceramic magnet, Celestion Greenback T1221 loudspeaker's tone has softened with age.

In order to recreate the gorgeously smooth tones of a 35-year-old vintage Greenback, Celestion not only revisited the 1967 recipe for the speaker, they also came up with a proprietary way of "aging" the speakers so they sound and feel like the originals made in the late '60s! The same exact, exclusive "aged" T1221 Greenback speaker is also found in the 1974CX, a 1x12" extension cabinet for the 1974X.

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM

Marshall JVM 205C Specs:

50W power
All-valve, with 5 x ECC83s, and 2 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England

• 30-watt, 2x12" combo guitar amplifier
  
• Two channels with independent volume controls — Normal and Top Boost
  
• Reverb and Tremolo effects onboard (controllable via optional footswitch)
  
• Master volume section with Tone Cut and Volume controls
  
• True bypass effects loop for bringing in your own pedals
  
• Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
  
• 16-ohm output jack for running a cabinet along with the internal speakers
  
• Features two 12" 8-ohm Celestion Alnico Blue speakers
  
• Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
  
• Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
  
• Weight: 73.59 lbs.

Vox AD50VT 50W Guitar Amplifier

Number of amp types: 11
Number of effects: 11, Noise reduction: 1
Number of programs: 11 preset, 2 channel.
Input/output jacks: Top panel ??? 1 x INPUT. Rear panel ??? 1 x FOOT SW , 1 x LINE/ PHONE,
(AD100VT, AD50VT & AD50VT121 only) 1 x EXTERNAL SPEAKER OUT, (AD100VT only) 1 x LOOP RETURN Jack
1 x LOOP SEND Jack.
Power amp output:AD100VT = maximum 100 RMS @ 8 ohms, AD50VT(212) = maximum 50W RMS @ 8 ohms
AD30VT = maximum 30W RMS @ 8 ohms, AD15VT = maximum 15W RMS @ 8 ohms.
Adjustable Output Wattage (AD100VT, 50VT, 50VT-212, 30VT).
Speaker: AD100VT = 2 x 12 inch VOX oringinal 16 ohm, AD50VT-212 = 2 x 12 inch VOX oringinal 16 ohm
AD50VT = 1x Celestion 70/80 (12 inch 8 ohm), AD30VT = 1x VOX original (10 inch 8 ohm), AD15VT = 1x VOX original
(8 inch 8 ohm),
Signal processing A/D conversion: 24-bit, D/A conversion: 24-bit, Sampling frequency: 44.1 kHz .
Power supply requirements: AC, local voltage.
Power consumption: AD100VT=100W, AD50VT(212)=52W, AD30VT=45W, AD15VT=23W
Dimensions: AD100VT = 55.3cms (21.77“) (H) x 68.4cms (26.93“) (W) x 26.8cms (10.55“) (D),
AD50VT-212 = 48.5cms (19.09“) (H) x 67.3cms (26.50“) (W) x 26.5cms (10.43“) (D),
AD50VT = 50.67cms (19.95“) (H) x 57.81cms (22.76“) (W) x 26.5cms (10.43“) (D),
AD30VT = 43cms (16.93“) (H) x 45.59cms (17.95“) (W) x 22.40 cms (8.82“) (D),
AD15VT = 39.5cms (15.55“) (H) x 42.8cms (16.85“) (W) x 22.4cms (8.82“) (D)
Weight: AD100VT = 29kg (63.93lbs), AD50VT-212 = 23kg (50.71lbs), AD50VT = 20kgs (44.09lbs)
AD30VT = 12kgs (26.46lbs), AD15VT = 10kgs (22.05lbs) .
Included items: power cable .
Options (sold separately): VFS2 dual foot switch.

The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.

Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30