| Content |
Ortofon OM10 Stylus replacement. A slip on replacement stylus assembly for all cartridges in the Ortofon OM range. Can be used to replace the stylus on the OM10 or to upgrade OM5e to an OM10.
Specification |
Output voltage at 1000 Hz, 5cm/sec.
|
4 mV
| |
Channel balance at 1 kHz
|
1.5 dB
| |
Channel separation at 1 kHz
|
22 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range
|
20-24,000 Hz
| |
Frequency response
|
20-20,000 Hz + 3 / - 1 dB
| |
FIM distortion at recommended tracking force, DIN 45.542
|
| |
Tracking ability at 315Hz at recommended tracking force
|
70 µm
| |
Compliance, dynamic, lateral
|
25 µm/mN
| |
Stylus type
|
Elliptical
| |
Stylus tip radius
|
r/R 8/18 µm
| |
Equivalent stylus tip mass
|
0.5 mg
| |
Tracking force range
|
1.25-1.75 g (12.5-17.5 mN)
| |
Tracking force, recommended
|
1.5 g (15 mN)
| |
Tracking angle
|
20°
| |
Internal impedance, DC resistance
|
1 kOhm
| |
Internal inductance
|
580 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-400 pF
| |
Cartridge colour, body/stylus
|
Black/Black
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
|
Stylus 10
|
| Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | Stylus 2M Red
| Technical data |
|
| Frequency range |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,6-2,0 g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Stylus colour |
Red |
|
|
| Recommended for following cartridges |
2M Red |
*) Typical value | Technical data
Frequency range 20-20.000 Hz
Frequency response 20-15.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force *) 60 µm
Compliance, dynamic, lateral 15 µm/mN
Stylus type spherical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,25-2,25 g (17,5-22,5 mN)
Tracking force, recommended 2,0 g (20 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges - Dual TKS 49 S
*) Typical value | Replacement stylus for the Carl Cox Signature CS-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output | Replacement stylus for the CC-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Reviews
There are no reviews yet.