| Content |
Ortofon OM10 Stylus replacement. A slip on replacement stylus assembly for all cartridges in the Ortofon OM range. Can be used to replace the stylus on the OM10 or to upgrade OM5e to an OM10.
Specification |
Output voltage at 1000 Hz, 5cm/sec.
|
4 mV
| |
Channel balance at 1 kHz
|
1.5 dB
| |
Channel separation at 1 kHz
|
22 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range
|
20-24,000 Hz
| |
Frequency response
|
20-20,000 Hz + 3 / - 1 dB
| |
FIM distortion at recommended tracking force, DIN 45.542
|
| |
Tracking ability at 315Hz at recommended tracking force
|
70 µm
| |
Compliance, dynamic, lateral
|
25 µm/mN
| |
Stylus type
|
Elliptical
| |
Stylus tip radius
|
r/R 8/18 µm
| |
Equivalent stylus tip mass
|
0.5 mg
| |
Tracking force range
|
1.25-1.75 g (12.5-17.5 mN)
| |
Tracking force, recommended
|
1.5 g (15 mN)
| |
Tracking angle
|
20°
| |
Internal impedance, DC resistance
|
1 kOhm
| |
Internal inductance
|
580 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-400 pF
| |
Cartridge colour, body/stylus
|
Black/Black
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
|
Stylus 10
|
| DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S | Genuine Original Stylus for OM 30, OM 30 Super, OMP30, LM 30, Concorde 30, TM 30H
Nude Fine Line
Interchangeability/Upgrade Group: A | Replacement stylus for the CC-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| Stylus 2M Red
| Technical data |
|
| Frequency range |
20-22.000 Hz |
| Frequency response |
20-20.000 Hz + 3 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,6-2,0 g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Stylus colour |
Red |
|
|
| Recommended for following cartridges |
2M Red |
*) Typical value |
Reviews
There are no reviews yet.