PALMER AUDIO AHMCT8 AUDIO CABLE TESTER

Original price was: €62.57.Current price is: €44.42. incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521021350
Installments calculation
CompareAdd to wishlist Submit Better Price
User’s Manual   A stage is only as good as its cables — and the AHMCT 8 sets the record straight. The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the […]

 

Read more

pdfUser’s Manual

 

A stage is only as good as its cables — and the AHMCT 8 sets the record straight.

The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers — both in the workshop and on stage.

The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands.

The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.

  • Solid metal housing
  • Powered by a 9-V block battery
  • Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
  • Additional continuity tester with measuring probes
  • Optical display and buzzer

Product type Test Equipment


Connectors 6.3 mm Jack , Banana plug , DIN 5-pin , RCA , Speakon, 4-pin , XLR


Controls down , Power On/Off , up , volume


Indicators battery status , LED chain


Operating voltage 9 V block


Acoustic continuity test yes


Test cable yes


Cabinet material sheet steel


Cabinet surface powder coated


Width 105 mm


Depth 145 mm


Weight 0,64 kg

Weight 0.60 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO AHMCT8 AUDIO CABLE TESTER”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO AHMCT8 AUDIO CABLE TESTER removePALMER AUDIO PAN05 TOOLS Microphone Merger 2in to 1out removeNT-INSTRUMENTS MINIRATOR MR2 ANALOG AUDIO GENERATOR removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter removePALMER AUDIO PAN04 PMBL TOOLS Line level Mergebox removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester remove
NamePALMER AUDIO AHMCT8 AUDIO CABLE TESTER removePALMER AUDIO PAN05 TOOLS Microphone Merger 2in to 1out removeNT-INSTRUMENTS MINIRATOR MR2 ANALOG AUDIO GENERATOR removeAMERICAN AUDIO DB DISPLAY MKII Decibel Meter removePALMER AUDIO PAN04 PMBL TOOLS Line level Mergebox removePALMER AUDIO AHMCTDMX Pro 3-pin and 5-pin DMX and XLR cable tester remove
Image
SKUAHMCT8PAN05MINIRATORE010254PMBLAHMCTDMX
Rating
Price Original price was: €62.57.Current price is: €44.42. incl. GR VAT Original price was: €79.04.Current price is: €52.07. incl. GR VAT Original price was: €520.79.Current price is: €468.72. incl. GR VAT Original price was: €95.00.Current price is: €85.00. incl. GR VAT Original price was: €373.14.Current price is: €227.94. incl. GR VAT Original price was: €48.96.Current price is: €29.08. incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

Only 5 left in stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOnly 1 left in stock (can be backordered)In stockOnly 5 left in stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentpdfUser's Manual   A stage is only as good as its cables — and the AHMCT 8 sets the record straight. The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers — both in the workshop and on stage. The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands. The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.
  • Solid metal housing
  • Powered by a 9-V block battery
  • Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
  • Additional continuity tester with measuring probes
  • Optical display and buzzer
Product type Test Equipment
Connectors 6.3 mm Jack , Banana plug , DIN 5-pin , RCA , Speakon, 4-pin , XLR
Controls down , Power On/Off , up , volume
Indicators battery status , LED chain
Operating voltage 9 V block
Acoustic continuity test yes
Test cable yes
Cabinet material sheet steel
Cabinet surface powder coated
Width 105 mm
Depth 145 mm
Weight 0,64 kg
With the PAN05, two microphone signals can be mixed down to one. Since decoupling occurs via the balanced resistor network, the PAN05 also lets phantom power "pass through“, useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics. SPECIFICATIONS:
  • Input: 2 x XLR/f balanced
  • Nominal impedance: 200 Ω
  • Output 1 x XLR/m balanced
  • Load impedance >200 Ω
  • Symmetrically decoupled through resistors
  • Total ohmic value: 200 ohms
  • Typical attenuation: 6 dB
  • Housing: metal casing 110 x 73 x 42 mm

Minirator MR1 is the powerful analog audio generator providing a comprehensive
set of analog audio test signals required in a professional audio environment.
This handy audio generator enables you to stimulate any analog device with a
broad range of appropriate signals like sine wave, pink noise, white noise,
sweeps and many others, for performance checking, maintenance and repairs.
Convenient, reliable and optimized - Minirator fits into your pocket as well as in
your budget.
 
Product-details
Signals:
? Sine Wave
? Square Wave
? Frequency Sweep
? White Noise
? Pink Noise
? Polarity Test Signal

Features:
? 20Hz to 20kHz, adjustable
  in 1/3rd octave steps
? Level adjustable
? Low distortion

Details The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer. Specifications • Designed to set in an amp rack to view your decibel level • Creates a great light show in your amp rack • Display progresses from green through amber to red • Sensitivity adjustment on both left and right channels • 2 separate modes: dot and bar • Includes 5V power supply • Line Inputs: Left & Right RCA / Left & Right XLR • Line Outputs: Left & Right RCA / Left & Right XLR • Voltage Operation: DC 5V, 500mA Power Supply included • Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm • Weight: 2.5 lbs. / 1.25kg.

The PMBL is a 2 channel passive line level merge box. Each channel has 2 balanced XLR/f inputs. The input signal is merged via a resistor network to a XLR/m output.The top side input is transformer isolated. Possible applications might be the routing of two mixing desks to one power amp or mixing a stereo signal down to mono. Our transformer technology allows for an unbalanced top side input to be sent out balanced. 

Specifications:

  • Each Channel: Input 1 transformer balanced XLR/f. Symmetrically decoupled through resistors
  • Total ohmic value: 2 K Maximum level for THD

Palmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester MCT DMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unitʼs 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

 

  • Tests 3-pin and 5-pin DMX cables for continuity
  • Also tests 3-pin XLR microphone cables
  • Automatic test mode or manual pin 1 - 5 selection
  • LED indicators
  • Mounting brackets included

 

Product type Test Equipment
Connectors XLR (3-pin) , XLR (5-pin)
Controls Auto Scan , On / Off , Scan switch
Indicators LED chain
Operating voltage 2 x AA battery
Acoustic continuity test no
Test cable no
Cabinet material sheet steel
Cabinet surface powder coated
Width 240.2 mm
Height 48 mm
Depth 53 mm
Weight 0,7 kg

 

Weight0.60 kg0.26 kg0.17 kg1.50 kg0.65 kg0.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.60 kg
Weight 0.26 kg
Weight 0.17 kg
Weight 1.50 kg
Weight 0.65 kg
Weight 0.80 kg