| Content |
Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (mono): 8 ohms
- Power Rating (mono): 75 W
- Cabinet weight without speakers: 12 kg
- Back: Open
- Dimensions (W x D x H): 58 x 29 x 45 cm
- Front Grill: detachable
- Speaker Mounting: 1x12" front mounted
LEGEND 1258™
Higher power, vintage, seamed cone tonality for guitar. Ideal Vintage alnico Jensen replacement.
Coloration : American growl, but with sparkle, definition and edgy top-end. Very vintage!
Genre : Rock and Roll, Country, Blues
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 75 W / Music Program N/A
- Resonance 94 Hz
- Usable Frequency Range 80 Hz - 4 kHz
- Sensitivity 100.1
- Magnet Weight 34 oz.
- Gap Height 0.312“, 7.92 mm
- Voice Coil Diameter 1.5“, 38.1 mm
| Marshall 1960AX 100W 4x12'' Guitar Speaker Cabinet
Marshall Speaker Cabinets
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that their speaker cabinets are also built to stand the test of time. Highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then Marshall has made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only six were ever made.
As a result, Marshall came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs you ask? Well, 2 went to Pete Townshend, 2 went to John Entwhistle and the remaining 2 went to the Small Faces. The Marshall stack on the other hand has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As Marshall invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
Heavy-duty castors are fitted as standard to all Marshall full size 4x12's to ensure that these cabinets are ready to roll without rocking.
No sharp metal edges or rough fittings ? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all eight cabinet corners.
The highest quality woodwork includes the 'corner locking' of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
Technical Info
Vintage-circa early 70's
Checkered cloth
White piping
Medium size white logo
Black Levant vinyl
Gold beading on Cab
Angled front
Speakers: 4 Celestion G12 M-25w SPKR-00016
Power: 100 watts
Impedance: 16 ohm
Dimensions: 760 x 830 x 360 mm
Weight: 37.7 kg
Cover: COVR-00022 optional | Info
Handwired 1960A Cabinet with vintage cosmetics and Celestion G 12H-30 speakers | Marshall 1960A 300W Guitar Speaker Cabinet
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that Marshall's speaker cabinets are also built to stand the test of time. Their highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then they have made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only 6 were ever made.
As a result, we came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs do we hear you ask? Well, two went to Pete Townshend, two went to John Entwhistle and the remaining two went to the Small Faces. The Marshall stack, on the other hand, has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As we invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
The 1960A is switchable from mono [4 or 16 Ohms] to stereo [8 Ohms per side], and is equipped with Celestion G12T-75 speakers.
The highest quality woodwork includes the "corner locking" of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
No sharp metal edges or rough fittings ??? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all 8 cabinet corners.
Technical Info
Black grille cloth
White piping
Black elephant grain vinyl
Speaker: 4 x 12 in. G12T-75
Power: 300 watt
Impedance: 4 or 16 ohms mono/8 ohms stereo
Dimensions: 760 x 830 x 360mm
Weight: 36.4 kg | Hand Soldered, 120 Watt 4x12 Straight Front
To complement the 1959HW's visual sonic majesty we offer the 1960AHW (angled) and 1960BHW (straight) 4x12" cabinets that boast Basket Weave fret cloth, metal handles, "100" logos and are loaded with Celestion's highly-acclaimed G12H-30 re-issue speakers.
The 1960AHW and 1960BHW Cabinets match the 1959HW heads perfectly. Both are 120 Watt, 16 Ohm mono 4x12" cabinets featuring salt-n-pepper grille cloth, metal handles, and loaded with the bass version of Celestion's reissue of the G12H30 speaker.
The timeless tone of vintage handwired, all-tube Marshall amplifiers have made them highly desirable to collectors and sonic connoisseurs alike. Due to overwhelming public demand, Marshall is proud to introduce meticulous, handwired re-issues of three of their most sought-after amplifiers as the first products in our brand new Handwired Series – a Series that celebrates the company's rich tonal heritage and revisits the handcrafted traditions and skills that first launched the Marshall legend.
Marshall 1960BHW Specifications:
- Cabinet Type: Base (straight, flat front)
- Speaker Type: G12H-30
- Speaker Configuration: 4 x 12 inches
- Power (RMS): 120 Watts
- Impedance: 16 Ohms
- Dimensions (mm): 760 x 830 x 360 (approx. 30 x 33 x 14.2 inches)
- Weight (kg): 36.4 (approx. 80 lbs.)
| Fitted with a pair of Celestion Vintage 30 speakers, the PPC212OBʼs design accentuates the top end frequencies whilst softening the bass response. The split rear panel means the delivery is less directional, creating an airy, spacious and three-dimensional sound. The added presence and chime makes the PPC212OB especially suited for cleaner styles, or for players who want a more vintage combo-type tone from their amp head. The PPC212OB features an 18mm birch plywood shell with our signature skid runners secured to the base to help acoustically couple the cabinet to the stage. |
Reviews
There are no reviews yet.