| Content |
Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (Mono): 4 or 16 ohms
- Cabinet impedance (Stereo): 8 ohms
- Power Rating (mono): 240 W
- Cabinet weight without speakers: 35.6 kg
- Back: Closed
- Dimensions (WxDxH): 73 x 71.5 x 35.5 cm
- Front Grill: detachable
- Speaker Mounting: 4 x 12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
Specifications - Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
- DC resistance, Re: 7,3 ohms
|
Marshall 1960AV 280W 4x12'' Guitar Speaker Cabinet
Marshall Speaker Cabinets
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that their speaker cabinets are also built to stand the test of time. Highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest-quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then Marshall has made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only six were ever made.
As a result, Marshall came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs, you ask? Well, 2 went to Pete Townshend, 2 went to John Entwhistle and the remaining 2 went to the Small Faces. The Marshall stack on the other hand has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As Marshall invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
Heavy-duty castors are fitted as standard to all Marshall full size 4x12's to ensure that these cabinets are ready to roll without rocking.
No sharp metal edges or rough fittings - the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all eight cabinet corners.
The highest quality woodwork includes the 'corner locking' of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
Technical Info
Standard Marshall 4x12
Black grille cloth
White piping
Large white logo
Black elephant grain vinyl
Angled front
Speakers: 4x12 in. Celestion G12 Vintage 70W S81 speakers SPKR-00022 (also known as Vintage 30)
Power: 280 watts
Mono/Stereo switchable
Stereo Impedance: 8 ohm
Mono Impedance: 16/4 ohm
Dimensions: 760 x 830 x 360 mm
Weight: 40.6 kg
Cover: COVR-00022 optional
| Marshall 1960TV 100W 4x12'' Guitar Speaker Cabinet
Invest in that fat sound!
The Marshall 1960TV Cabinet has an angled front; 4 - 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue it was never offered in the past this cab recreates the classic look and tones of yesteryear.
Marshall 1960TV Cabinet Features:
- Angled front
- 4 - 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
- Original grille cloth
- 3" taller than standard 4x12 cabs
Marshall 1960TV Cabinet Specifications:
- Handles 100W
- 16 ohms
- 29-3/5“W x 35-1/2“H x 14-4/5“D
- 44 kgs.
| Info
150W 2x12" Mono / 75W + 75W Stereo Cabinet. | Marshall 1960AX 100W 4x12'' Guitar Speaker Cabinet
Marshall Speaker Cabinets
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that their speaker cabinets are also built to stand the test of time. Highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then Marshall has made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only six were ever made.
As a result, Marshall came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs you ask? Well, 2 went to Pete Townshend, 2 went to John Entwhistle and the remaining 2 went to the Small Faces. The Marshall stack on the other hand has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As Marshall invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
Heavy-duty castors are fitted as standard to all Marshall full size 4x12's to ensure that these cabinets are ready to roll without rocking.
No sharp metal edges or rough fittings ? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all eight cabinet corners.
The highest quality woodwork includes the 'corner locking' of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
Technical Info
Vintage-circa early 70's
Checkered cloth
White piping
Medium size white logo
Black Levant vinyl
Gold beading on Cab
Angled front
Speakers: 4 Celestion G12 M-25w SPKR-00016
Power: 100 watts
Impedance: 16 ohm
Dimensions: 760 x 830 x 360 mm
Weight: 37.7 kg
Cover: COVR-00022 optional | Featuring two Celestion Vintage 30 speakers, the PPC212 is in essence our classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the the fattest possible tone when a 4×12″ would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high density 13 ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response.
| Power: |
120 Watts |
| Drivers: |
2 X 12? CELESTION VINTAGE 30 |
| Dimensions ( W x H x D ): |
53 X 78 X 38 cm |
| Weight: |
28 Kg |
|
Reviews
There are no reviews yet.