Content |
Palmer PDI-CTC (Palmer Direct Injection-Box - Cassic Tube Circuit)
The Palmer PDI-CTC (Palmer Direct Injection Box - Classic Tube Circuit) is intended for DI and preamp use. For the latter, a 4-band filter circuit has been integrated. Featuring a true tube circuit with output transformer, the PDI-CTC provides a balanced signal at the XLR output connectors that is electrically isolated. There are no semiconductors throughout the entire signal path including the filter stage. The PDI-CTC is mains powered, and the integrated power supply generates the necessary tube voltages.
In addition to the standard parallel and balanced mic level outputs the PDI-CTC also features both a balanced line level and a ¼" unbalanced low impedance output. The wide band low, lo-mid, hi-mid, and high frequency filters are "musically" voiced. A bell- shape filter characteristic has been chosen to prevent boosting undesirable subsonic frequencies as well as those beyond the audio range.
To exactly reproduce sound settings each and every time Palmer decided on individual toggle switches to set each of the four frequency bands to 0dB, +4dB, or +8dB. Essentially, the PDI-CTC circuit design is based on the idea to realize the shortest possible signal path in order to bring out the subtle tone characteristics of a tube. For that reason the unit does not incorporate a volume control. Due to the unit's extended dynamic range no limiting occurs before signal levels exceed +30dBu at the line output.
- Number of Channels: 1
- Operating Mode: Active
- Max Input Level: 4 dbu
- Input Impedance: 1 MOhm
- Max Output Level: 4 dB
- Output Type: Transformer Balanced
- Nominal Output Impedance: 200 Ohms (Mic out) / 600 Ohms (Line out)
- Frequency Range: 20 Hz - 20 kHz
- Controls: Ground Lift, 4-Band filter
- Indicators: Power Indicator
- Connectors: 1/4" Jack Input / XLRm Output
- Power Supply: Internal switchable 100 V / 240 V
- Housing: Steel / Aluminium
- Dimensions: 220 mm x 240 mm x 100 mm
- Features: Tubes: 1 x ECC83 / 12AX7, 1 x ECC82 / 12AU7
| |
Inline Transformer IA-2
The model IA-2 line matching transformers !S designed to properly match a low impedance signal to a low impedance source. The advantage of "ground lift" switching allows to optmize hum problems. Technical Data Frequency response 20 Hz - 20 KHz + 1 dB Impedance 600 : 600 Ohm THD K3 50 Hz = 0.5 % Level < + 6 dBm Weight 100 g Dimensions diameter 17 mm, lenght 115 mm |
2-channel DI box/splitter, passive Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs for connecting a mixer Switchable to split mode (input 1 routes the signal to both outputs) Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 2 signal inputs via XLR/jack combo connectors 2 low-impedance XLR outputs Modern convex housing design Full rubber housing corners for safe operation Cables can be routed under the housing |
Palmer PAN 03 19" DI Box 4-Channel active
Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.
Product type
DI Boxes
Type
active
Channels
4
Inputs
4
Input connectors
6.3 mm jack
Max. input level
+ 45 dBu
Input impedance
(@ 60 Hz) 1 M Ohm(s)
Input pad
0 / -30 dB
Outputs
4 (+ 4 parallel XLR outs)
THRU outputs/channel
1
Output connectors
6.3 mm jack , XLR
Max. output level
+ 10 dBu
Output impedance
600 Ohm(s)
Frequency response
10 - 20000 Hz
Transformer balanced
Yes
Ratio
10 : 1
Indicators
Power
Controls
attenuator , ground lift
Operating voltage
external
Cabinet material
sheet steel
Cabinet surface
Powder coated
Width
480 mm
Width
19 "
Depth
90 mm
Height
45 mm
Height
1 U
Weight
1,6 kg
|
Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Product type
DI Boxes
Type
passive
Channels
1
Inputs
1
Input connectors
6.3 mm Jack
Max. input level
+ 54 dBu
Input impedance
(@ 60 Hz) 60k Ohm(s)
Input pad
0 / -30 dB
Outputs
1
THRU outputs/channel
1
Output connectors
6.3 mm Jack , XLR
Max. output level
+ 4 dBu
Output impedance
600 Ohm(s)
Frequency response
20 - 20000 Hz
Transformer balanced
yes
Ratio
10 : 1
Controls
attenuator , ground lift
Cabinet material
sheet steel
Cabinet surface
powder coated
Width
110 mm
Depth
73 mm
Height
42 mm
Weight
0,34 kg
|
Reviews
There are no reviews yet.