PALMER AUDIO PDIR01 Pro DI-REVERSE – Reversed DI Box

75.73 incl. GR VAT

Available on backorder

EAN: 4049521149276
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: PDIR01 Category:
Reverse DI Box Users frequently attempt to connect a DI box in reverse in order to feed a balanced signal into an unbalanced input. Because of mismatching, however, this leads to unsatisfactory results. With the PDIR01 (DI-REVERSE), we offer a box that provides a perfect technical solution to the problem without using adapters. Type: passive […]

 

Read more

Reverse DI Box

Users frequently attempt to connect a DI box in reverse in order to feed a balanced signal into an unbalanced input. Because of mismatching, however, this leads to unsatisfactory results. With the PDIR01 (DI-REVERSE), we offer a box that provides a perfect technical solution to the problem without using adapters.

  • Type: passive
  • Number of channels: 1
  • Number of inputs: 1
  • Input connections: XLR/f
  • Max. input level: +6dBu
  • Input impedance: 2 kohms
  • Number of outputs: 1
  • Output connections: 6.3 mm jack
  • Max. output level: +6dB
  • Output impedance: 2 kohms
  • Frequency range: 20Hz – 20kHz
  • Transformer balanced: yes
  • Transformation ratio: 1:1
  • Controls: Ground lift
  • Housing material: Sheet steel
  • Housing surface: powder-coated
  • Width: 110 mm
  • Depth: 35 mm
  • Height: 39 mm
Weight 0.17 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PDIR01 Pro DI-REVERSE – Reversed DI Box”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PDIR01 Pro DI-REVERSE - Reversed DI Box removeOMNITRONIC LH-060 2-channel DI box/splitter, passive removePALMER AUDIO PAN02 TOOLS Active DI-box removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removeSTEWART ADB1 ACTIVE D.I BOX remove
NamePALMER AUDIO PDIR01 Pro DI-REVERSE - Reversed DI Box removeOMNITRONIC LH-060 2-channel DI box/splitter, passive removePALMER AUDIO PAN02 TOOLS Active DI-box removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack removeSTEWART ADB1 ACTIVE D.I BOX remove
ImageBEHRINGER DI100 Ultra-Rugged DI Box for Stage and Studio Powered active battery phantom
SKUPDIR01LH060PAN02E005264PAN03ADB1E
Rating
Price 75.73 incl. GR VAT 73.35 incl. GR VAT 68.20 incl. GR VAT 46.00 incl. GR VAT 292.43 incl. GR VAT 164.56 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

In stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)In stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
Content

Reverse DI Box

Users frequently attempt to connect a DI box in reverse in order to feed a balanced signal into an unbalanced input. Because of mismatching, however, this leads to unsatisfactory results. With the PDIR01 (DI-REVERSE), we offer a box that provides a perfect technical solution to the problem without using adapters.

  • Type: passive
  • Number of channels: 1
  • Number of inputs: 1
  • Input connections: XLR/f
  • Max. input level: +6dBu
  • Input impedance: 2 kohms
  • Number of outputs: 1
  • Output connections: 6.3 mm jack
  • Max. output level: +6dB
  • Output impedance: 2 kohms
  • Frequency range: 20Hz - 20kHz
  • Transformer balanced: yes
  • Transformation ratio: 1:1
  • Controls: Ground lift
  • Housing material: Sheet steel
  • Housing surface: powder-coated
  • Width: 110 mm
  • Depth: 35 mm
  • Height: 39 mm

2-channel DI box/splitter, passive Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs for connecting a mixer Switchable to split mode (input 1 routes the signal to both outputs) Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 2 signal inputs via XLR/jack combo connectors 2 low-impedance XLR outputs Modern convex housing design Full rubber housing corners for safe operation Cables can be routed under the housing

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.Product Features: Professional and multi-purpose direct injection box for stage and studio applications Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer Internal battery automatically shuts off when phantom power is applied Allows direct connection to speaker outputs with up to 3,000 Watts Switchable input attenuation allows input levels of up to +50 dB Ground Lift switch eliminates typical ground loop problems ¼" TRS and gold-plated XLR connectors Ultra-rugged, road-suitable aluminum case Stackable oversized rubber corners High-quality components and exceptionally rugged construction ensure long life and durability Conceived and designed by BEHRINGER Germany   With the DI100, you can rest assured that your sound source will reach the console balanced and noise-free. BEHRINGER's take on the all-important active DI box gives you functionality, durability and incredible sound at a remarkable price.
Be Direct
Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" LINK jack to send your signal to an on-stage amplifier. The DI100 also has a switchable attenuation pad, allowing input levels of up to +50 dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features BEHRINGER's renowned OT-1 output transformer.
Superior Sound, Incredible Value
DI boxes are an essential part of any stage or studio, and the DI100 delivers the exceptional sound you expect, wrapped up in a rugged, road-proof aluminum case with stackable rubber corners.

Palmer PAN 03
19" DI Box 4-Channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Product type DI Boxes
Type active
Channels 4
Inputs 4
Input connectors 6.3 mm jack
Max. input level + 45 dBu
Input impedance (@ 60 Hz) 1 M Ohm(s)
Input pad 0 / -30 dB
Outputs 4 (+ 4 parallel XLR outs)
THRU outputs/channel 1
Output connectors 6.3 mm jack , XLR
Max. output level + 10 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 20000 Hz
Transformer balanced Yes
Ratio 10 : 1
Indicators Power
Controls attenuator , ground lift
Operating voltage external
Cabinet material sheet steel
Cabinet surface Powder coated
Width 480 mm
Width 19 "
Depth 90 mm
Height 45 mm
Height 1 U
Weight 1,6 kg

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

Weight0.17 kg0.70 kg0.31 kg0.65 kg1.90 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.17 kg
Weight 0.70 kg
Weight 0.31 kg
Weight 0.65 kg
Weight 1.90 kg
Weight 0.50 kg