PALMER AUDIO PEABO MI EABO – Balanced Line Output Switch

69.00 incl. GR VAT

Available on backorder

EAN: 4049521133091
Installments calculation
CompareAdd to wishlist Submit Better Price
The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs. Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private. Two different […]

 

Read more

The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.
  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a “telephone effect” or more Hall. Run both outputs of the PEABO to two channels of the mixing desk – now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.

Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum.

Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board.

The PEABO’s strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.

 

Weight 0.64 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PEABO MI EABO – Balanced Line Output Switch”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PEABO MI EABO - Balanced Line Output Switch removeVOX VFS-2 Dual Footswitch removeMARSHALL PEDL-10021 5-Switch Foot Controller Marshall Amp removeBLACKSTAR FS-12 Footswitch removeDIGITECH DOD-MINIEXP Mini Expression Pedal removeLINE 6 FBV-2 Foot Controller remove
NamePALMER AUDIO PEABO MI EABO - Balanced Line Output Switch removeVOX VFS-2 Dual Footswitch removeMARSHALL PEDL-10021 5-Switch Foot Controller Marshall Amp removeBLACKSTAR FS-12 Footswitch removeDIGITECH DOD-MINIEXP Mini Expression Pedal removeLINE 6 FBV-2 Foot Controller remove
Image
SKUPEABOVFS-2PEDL-10021G30BS00002DOD-MINIEXPG30LN00016
Rating
Price 69.00 incl. GR VAT 36.00 incl. GR VAT 52.00 incl. GR VAT 79.00 incl. GR VAT 110.35 incl. GR VAT 40.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.
  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a "telephone effect" or more Hall. Run both outputs of the PEABO to two channels of the mixing desk - now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.
Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABO's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.  

Dual footswitch for Vox Pathfinder & Cambridge range. Hi-quality durable all-metal construction.

The Marshall PEDL-10021 5-way LED foot controller can be used of any of the TSL Series Amplifiers. The Marshall TSL Foot Controller switches between channels, and can also be used as an on/off control for the Reverb and Effects loop. A must have for any gigging guitarist. LED lights for dark stages. 5 way selection controller. Some of the TSL Range already include footswitches.The FS-12 is a multi-function footcontroller in a compact, low profile, durable aluminium body that allows access to all 36 patches of the ID:CORE 100 / ID:CORE 150. The large, clear dot matrix display ensures easy visibility for the fully chromatic tuner and current patch details. Two user-configurable function switches provide control for:
  • Modulation, Delay and Reverb effects on/off
  • Modulation and Delay tap tempo
  • Full Looper functionality
  • Effects Loop on/off
  • Super Widestereo on/off
  • Noise Gate on/off
The new passive DOD Mini Expression Pedal is just the right size for your pedal board, and your wallet. Rugged all-steel construction and gear drive means that there are no strings to break. Despite its compact form factor it is designed to have the same feel and throw as pedals that are twice its size (and price).

Don't feel like carrying around a full-sized foot controller? Now you don't have to! The FBV2™ lets you scroll through the first bank of four presets and is small and light enough to fit in your gig bag. With its ultra-reliable switches and aluminum case, the FBV2 can take all the abuse you can throw at it.

  Specifications
  • Scrolls through Channels A,B,C, & D
  • Self-powered though the locking cable
  FBV2 is compatible with
  • Spider Valve
  • Spider II
  • Spider III
  • Flextone III
  • Vetta
  • Vetta II
  • HD 147
  • Pod 2.0
  • Pod XT
  • Pod XT Pro
  • Bass Pod XT
  • Bass Pod XT Pro
  *FBV2 is not compatible with Spider II 15 or Spider III 15.

**FBV2 is only compatible with POD 2.0 units with pedal jacks labelled 'FBV Pedal.' It is not compatible with older units which have pedal jacks labelled simply 'Pedal.'
Weight0.64 kg0.50 kg4.00 kg0.66 kg0.50 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.64 kg
Weight 0.50 kg
Weight 4.00 kg
Weight 0.66 kg
Weight 0.50 kg
Weight 1.00 kg