PALMER AUDIO PEDMS MI DMS – Dynamic Mic Switcher

• Switch your vocal mic between the FOH mixer and the monitor mixer - this will allow you to talk exclusively to the band or the monitor mixing engineer.
• Sound variation. Send the two outputs of the DMS to two channels of the FOH mixer, adjust the channels differently (for example, adjust the EQ to get a telephone effect). This will allow you to switch between two microphone sounds on stage at your own leisure.
• You can use the DMS to switch the microphone between two different rooms/zones

Switch your signal between two different amplifiers, two different pedal boards or two different speaker cabinets. Flexible channel switching built into a compact die-cast case.

Dual footswitch with LED for Valve Reactor Series AC30VR & AC15VR, AC Custom Series AC15C1, AC30C2(X). Hi-quality durable all-metal construction with twin LED, separate stereo jack lead supplied for connect to amp.

Don't feel like carrying around a full-sized foot controller? Now you don't have to! The FBV2™ lets you scroll through the first bank of four presets and is small and light enough to fit in your gig bag. With its ultra-reliable switches and aluminum case, the FBV2 can take all the abuse you can throw at it.

• Scrolls through Channels A,B,C, & D
• Self-powered though the locking cable

• Spider Valve
• Spider II
• Spider III
• Flextone III
• Vetta
• Vetta II
• HD 147
• Pod 2.0
• Pod XT
• Pod XT Pro
• Bass Pod XT
• Bass Pod XT Pro

This simple but robust single-channel switch can be used universally. Whenever a change of channel or function via foot switch is required. For example, the PF1 can be used to switch the channel of a guitar amp or activate a particular function on a keyboard. The switch is latching, not spring return. To connect, a standard Mono Jack cable is sufficient.

• Type: passive
• Number of Outputs: 1
• Output Connections: 6.3 mm jack
• Controls: Foot switch
• Switch Type: latching
• Cabinet Material: sheet steel
• Cabinet Surface: powder-coated
• Width: 55 mm
• Depth: 65 mm
• Height: 60 mm

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

• Product Type: switcher
• Type: amp switcher
• Switching Functions: output switcher
• Number of Inputs: 2
• Input Connections: 6.3 mm jack
• Input Impedance: 10 M ohm
• Number of Outputs: 1
• Output Connections: 6.3 mm jack
• Output Impedance: 10 k ohms
• Transformer-Balanced Outputs: no
• Indicators: channel number
• Controls: channel switching, ground lift
• Power Supply: 9 VDC power adapter
• Power Consumption: 130 m A
• Cabinet Material: sheet steel/aluminium
• Cabinet Surface: powder coated/anodised
• Dimensions: 222 x 44 x 175 mm
• Accessories (included): 9VDC plug-in power supply