PALMER AUDIO PGA05 MI PGA 05 – Stereo DI Box Speaker Simulator

Discontinued

631.89 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Special DI box for guitars similar to the PGA04. However, the PGA05 is designed with two channels (stereo), but with no built-in load resistor. The PGA05 permits toggling between loudspeaker and line levels at the inputs. The filter section is identical to that of the PGA04. The PGA05 is thus particularly suitable for use as […]

 

Read more

Special DI box for guitars similar to the PGA04. However, the PGA05 is designed with two channels (stereo), but with no built-in load resistor. The PGA05 permits toggling between loudspeaker and line levels at the inputs. The filter section is identical to that of the PGA04. The PGA05 is thus particularly suitable for use as a stereo DI box in a 19″ guitar rack. The PGA 05 replaces the PDI 05.

Specifications:

Two independent channels, each channel:

  • Input: Jack socket with parallel output to Link through the signal
  • Input level: Switchable between line/loudspeaker level
  • Outputs: 2 jack sockets for line level, unbalanced, floating
  • One XLR/m balanced, floating, per PAD switchable level for line/microphone
  • Controls: Volume Filter, LOW,HIGHT, LITE/BROWN-switch for tone shaping
  • “Full Range Signal” volume, with 6kHz high-cut filter switch.
  • Filter volume and “Full Range Signal” can be mixed to produce unusual sounds 
  • Internal power supply, 230,115VAC
Weight 3.07 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PGA05 MI PGA 05 – Stereo DI Box Speaker Simulator”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PGA05 MI PGA 05 - Stereo DI Box Speaker Simulator removePALMER AUDIO PDI03L04 MI PDI 03 - Speaker Simulator 4 Ohm removePALMER PGA04L02 MI PGA 04 - Speaker Simulator with Loadbox 2 Ohm removePALMER PGA04L16 MI PGA 04 - Speaker Simulator with Loadbox 16 Ohm removePALMER AUDIO PDI06L16 MI PDI 06 - Power Attenuator 16 Ohm removePALMER AUDIO PDI05 MI PDI 05 - Stereo Speaker Simulator Reissue remove
NamePALMER AUDIO PGA05 MI PGA 05 - Stereo DI Box Speaker Simulator removePALMER AUDIO PDI03L04 MI PDI 03 - Speaker Simulator 4 Ohm removePALMER PGA04L02 MI PGA 04 - Speaker Simulator with Loadbox 2 Ohm removePALMER PGA04L16 MI PGA 04 - Speaker Simulator with Loadbox 16 Ohm removePALMER AUDIO PDI06L16 MI PDI 06 - Power Attenuator 16 Ohm removePALMER AUDIO PDI05 MI PDI 05 - Stereo Speaker Simulator Reissue remove
Image
SKUPGA05PDI03L04PGA04L02PGA04L16PDI06L16PDI05
Rating
Price 631.89 incl. GR VAT 392.88 incl. GR VAT 394.18 incl. GR VAT 386.42 incl. GR VAT 257.93 incl. GR VAT 552.82 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Special DI box for guitars similar to the PGA04. However, the PGA05 is designed with two channels (stereo), but with no built-in load resistor. The PGA05 permits toggling between loudspeaker and line levels at the inputs. The filter section is identical to that of the PGA04. The PGA05 is thus particularly suitable for use as a stereo DI box in a 19" guitar rack. The PGA 05 replaces the PDI 05.

Specifications:

Two independent channels, each channel:

  • Input: Jack socket with parallel output to Link through the signal
  • Input level: Switchable between line/loudspeaker level
  • Outputs: 2 jack sockets for line level, unbalanced, floating
  • One XLR/m balanced, floating, per PAD switchable level for line/microphone
  • Controls: Volume Filter, LOW,HIGHT, LITE/BROWN-switch for tone shaping
  • “Full Range Signal" volume, with 6kHz high-cut filter switch.
  • Filter volume and "Full Range Signal" can be mixed to produce unusual sounds 
  • Internal power supply, 230,115VAC

2, 4 and 16 Ohm versions also available

The PDI03 Palmer speaker simulator combines load impedance, a signal splitter and DI box especially designed for guitars. All functions are optimised for live and recording applications.

Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filter section is fed directly into a mixing console, tape recorder, etc. This permits power amplifiers to be operated to saturation without troublesome volume problems.

Two switches select between the 9 filter presets simulating various types of speakers and enclosures. Open back 2 x 12'' combo or 4 x 12'' cabinet characteristics and the punch of a full-out stack with a graphic EQ ''V'' setting can be selected as well as ''American'' or ''British'' speakers and ultra brightness.

Four paralleled unfiltered outputs are available for further processing. Both filter and line out level are adjustable.

For live monitoring, speakers may be connected while the reactive load is automatically switched off. Power handling capacity is 100W RMS without speakers.

 


Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

Technical specifications:

  • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
  • Input impedance: 2 ohms, max.
  • Input load: 120 w RMS
  • Input level display: 6 LED's
  • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
  • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
  • Level: unbalanced 0 dB, balanced -10 dB at 25 w
  • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
  • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
  • Both signals attenuable

Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

Technical specifications:

  • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
  • Input impedance: 8 ohms, max.
  • Input load: 120 w RMS
  • Input level display: 6 LED's
  • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
  • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
  • Level: unbalanced 0 dB, balanced -10 dB at 25 w
  • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
  • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
  • Both signals attenuable

Palmer Power Attenuator - Control the volume of your guitar amp

The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An additional level makes the speaker completely mute; the PDI06 then functions as a LOAD BOX and absorbs the entire output power of the amplifier.

This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier an output for connecting a speaker cabinet.

  • Maximum input power: 120 watts
  • 6-position switch, 5 increments (3 dB each) for volume reduction, equivalent to attenuation of the input power to 70%, 50%, 35%, 25%, 18%.
  • The LOAD BOX position mutes the connected speaker cabinet.
  • The BYPASS/ATTENUATOR switch lets the user toggle quickly between full and reduced output.
  • Input from amplifier: 1 x 6.3 mm jack socket
  • Output for speaker cabinet: 1 x 6.3 mm jack sockets connected in parallel
  • Output impedance: 16 ohms

With its flexible potential applications, the PDI-05 is equally at home in the studio and home recording as well as onstage, e.g., in the racks of Rush or Def Leppard. Originally developed for the preamp/multieffect/power amp combination popular in the late eighties and nineties, this authentic reissue is also suitable for heads and combo amps. What's more - the precise frequency correction of the stereo speaker simulator turns overdrive and distortion pedals or multieffect units into a genuine preamp with an authentic sound. The PDI 05 lends digital keyboards and drum machines fullness and analogue warmth without complex and time-consuming post-processing at the mixing desk. A built-in headphone amplifier permits "environmentally-friendly" practicing; its high output power even permits direct connection of ordinary hi-fi speakers.

The stereo speaker simulator is active; the power supply is permanently installed. It can also be operated in mono mode and with power amps (in this case, the power amp must always be connected to speakers or a corresponding load, for example the Palmer PDI 06 loadbox).

The PDI-05 makes conventional micing unnecessary and provides for a perfectly isolated signal without interference from other instruments and without feedback. With the reissue, pros and aficionados finally once again have a device at their disposal that has proven itself in more than 20 years of use, onstage and in the studio, around the world.

  • Typ: activ
  • Channels: 2
  • input type: unbalanced
  • Inputs: 2
  • input connectors: 6.3 mm Jack
  • output type: balanced / unbalanced
  • outputs: 2
  • output connectors: 6.3 mm Jack / XLR
  • output impedance: 10 kOhm (6.3 mm Jack) / 600 Ohm (XLR)
  • controls: Filter Volume, Ground-Lift, mains voltage selector, Phones Level, Power, Voicing
  • display: Power
  • loadbox: no
  • max. load: 200 W
  • voicing filter: yes
  • power attenuator: no
  • transformer isolated outputs: yes
  • cabinet material: sheet steel / aluminium
  • Cabinet / Housing surface: powder coated / anodized
  • width: 480 mm / 19“
  • depth: 180 mm
  • height: 44,5 mm / 1 U
  • power supply: 230 / 115 V AC
Weight3.07 kg2.60 kg2.56 kg2.56 kg2.40 kg2.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.07 kg
Weight 2.60 kg
Weight 2.56 kg
Weight 2.56 kg
Weight 2.40 kg
Weight 2.90 kg