PALMER GA 03 Splitter for Guitars Y-Box Active

117.79 incl. GR VAT

Available on backorder

EAN: 4049521049255
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Clinking input with 1 Mohm input impedance
  • Output AMP1 as parallel circuit
  • Output AMP2 is electronically converted with a subsequent transformer stage
  • Operation with 9V battery recommended
  • 5 years manufacturing guarantee
  • Clinking input with 1 Mohm input impedance
  • Output AMP1 as parallel circuit
  • Output AMP2 is electronically converted with a subsequent transformer stage
  • Operation with 9V battery recommended
  • 5 years manufacturing guarantee

 

Read more

“When I run my guitar into two amps simultaneously, I always get a loud hum”. This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended.

The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.

 

Technical specifications:

Product type
Splitters
Split type
1 in 2
Inputs
1
Input connectors
6.3 mm jack
Adjustable input
no
Number of split-outputs per canal
1
Output connectors
6.3 mm jack
THRU outputs/channel
1
Transformer isolated outputs
Yes
Adjustable output
no
Controls
ground lift, phase
Indicators
Power
Operating voltage
9 V block, 9 V DC power supply
Width
125 mm
Depth
80 mm
Height
45 mm
Cabinet material
sheet steel
Cabinet surface
Powder coated
Weight
0,528 kg

Optional Power Supply PW9V

Weight 0.25 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER GA 03 Splitter for Guitars Y-Box Active”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER GA 03 Splitter for Guitars Y-Box Active removePALMER AUDIO PCABM CAB M - Passive Cabinet Merger removeGRANITE T-1C Drum Stool 280mm removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removePALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removeQUIKLOK BS-317 Low Profile Amp Stand remove
NamePALMER GA 03 Splitter for Guitars Y-Box Active removePALMER AUDIO PCABM CAB M - Passive Cabinet Merger removeGRANITE T-1C Drum Stool 280mm removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removePALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removeQUIKLOK BS-317 Low Profile Amp Stand remove
Imagepalmer audio GA03_splitter box guitars activegranite_t_1c_adjustable_seat
SKUPGA03PCABMM29GN00002G30QL00000PGA04G30QL00002
Rating
Price 117.79 incl. GR VAT 28.51 incl. GR VAT 39.00 incl. GR VAT 73.00 incl. GR VAT 386.42 incl. GR VAT 49.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Clinking input with 1 Mohm input impedance
  • Output AMP1 as parallel circuit
  • Output AMP2 is electronically converted with a subsequent transformer stage
  • Operation with 9V battery recommended
  • 5 years manufacturing guarantee
Adjustable drum stool, diameter 280mm
Content
"When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.  
Technical specifications:
Product type
Splitters
Split type
1 in 2
Inputs
1
Input connectors
6.3 mm jack
Adjustable input
no
Number of split-outputs per canal
1
Output connectors
6.3 mm jack
THRU outputs/channel
1
Transformer isolated outputs
Yes
Adjustable output
no
Controls
ground lift, phase
Indicators
Power
Operating voltage
9 V block, 9 V DC power supply
Width
125 mm
Depth
80 mm
Height
45 mm
Cabinet material
sheet steel
Cabinet surface
Powder coated
Weight
0,528 kg
Optional Power Supply PW9V

The concept behind the cab merger may be very simple, but it fills an important gap!

Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible.

In addition, you can select whether the cabinets should be wired in parallel or series  with one another. For example, if you interconnect two 8 ohm cabinets.  The PCABM offers you two resulting impedances to choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passive and does not affect the tone in any way.

  • Type: passive
  • Number of inputs: 2
  • Input connections: 6.3mm jack
  • Number of outputs: 2
  • Output connections: 6.3mm jack
  • Cabinet material: die-cast aluminium
  • Case surface: powder-coated
  • Width: 105 mm
  • Depth: 35 mm
  • Height: 35 mm
Adjustable drum stool, diameter 280mm
Drums seat adjustable in height (500mm-630mm), Anatomical round saddle with a diameter of 280mm, Tube diameter: 28.6mm/25mm, Legs double reinforced with anti-slip protectors at the ends.
  • Large amp "X” stand with adjustable back tier
  • Adjusts so that the back tier rests on the back panel of open back guitar amps/combos and does not enter the empty space
  • This unique design assures no damage to tubes or electronics
  •  
  • Αpplication: Amplifier
    Type: Adjustable
    Type: Single
     
  • Also available as 2, 4 and 16 Ohm Versions

    Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

    Technical specifications:

    • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
    • Input impedance: 8 ohms, max.
    • Input load: 120 w RMS
    • Input level display: 6 LED's
    • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
    • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
    • Level: unbalanced 0 dB, balanced -10 dB at 25 w
    • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
    • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
    • Both signals attenuable

    Double-Brace, Low Profile Stand for Large Amps  and Combos Height adjustment range Front tier: 8.25" to 11" - 21 to 28 cm Back tier: 11.4" to 18.6" - 29 to 47.2 cm Width: 19.3" - 49 cm Folded height: 22" - 56cm Frame tube size: 20 x 15 mm Tier tube size: 28mm Weight capacity: 100lb - 45.2 kg Weight: 6.6 lb - 3 kg

    Weight0.25 kg0.13 kg2 kg1.00 kg2.70 kg3.10 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.25 kg
    Weight 0.13 kg
    Weight 2 kg
    Weight 1.00 kg
    Weight 2.70 kg
    Weight 3.10 kg