Content |
Palmer GA MKII Grand Audition MKII
- 24 switchable balanced line outputs
- Intuitive browser-based control software
- Individual level control on each output
- Mono and stereo modes
- Multiple channel selection
- High-quality analogue signal path
- Instant channel switching with no noise or interference
- XLR line inputs and built-in USB media player
- Up to three devices cascadable
When tasting wine, it is important that a comparison is as neutral as possible. The same applies to selecting loudspeakers.To accurately judge sound characteristics, it is essential to listen to different loudspeakers under the same conditions.
Comfortable loudspeaker routing with variable level control for an uncompromising comparison on the sales floor, along with multi-monitor and multi-room applications, are just some of the ways the GrandAudition MK2 can be effectively put to use.
GrandAudition MK2 lets you connect 16 individual loudspeakers or eight loudspeaker pairs and up to eight subwoofers - all with balanced line-level XLR connectors and housed in two 19\" rack units. Depending on how you want to use GrandAudition MK2, the outputs can be selected either individually or as stereo pairs via an intuitive browser-based app or from the unit itself.
Thereby you can choose to just switch between loudspeakers or freely configure any output combination you want, making it not only the ideal solution for a loudspeaker presentation, but also an excellent choice as a central-control-unit for trade fairs, in laboratories and for multi-room sound distribution.
Source material is supplied from a mixer, CD player or digital audio workstation through two balanced XLR inputs - with volume control, of course. But that\'s not all. GrandAudition MK2 is also equipped with a built-in USB media player on which reference titles can be accessed in WAV, AIF, FLAC, MP3 and OGG data formats.
Highlight of GrandAudition MK2
The browser-based remote can be controlled on a tablet or laptop, offering maximum operating convenience. Ethernet and WLAN-capable devices can be used for complete configuration and control of the unit, including channel naming, media player, and other practical functions.
The ability to individually adjust the level for each output and its quick and noiseless switching mechanism, makes it possible to accurately compare loudspeakers and help you reliably guide your customers to select the right loudspeaker. Routing applications that use different levels for each output can also be set up, and a fully analogue signal path with the highest quality is also of course guaranteed with Palmer.
If necessary, you can cascade units to triple the impressive number of 16 channels plus 8 outputs and thus manage even the largest routing scenarios for monitors, such as in presentation areas. You can also use the subwoofer outputs to connect additional loudspeakers without experiencing any technical drawbacks.
In addition to powered loudspeakers, passive loudspeakers can be incorporated with power amps. Signals can also be distributed over multiple line outputs for other applications, for example, by connecting as many as 24 headphone amplifiers to one source signal - an invaluable aid in conference technology and at trade fairs. And to top it all off, GrandAudition MK2 performs remarkably well in measuring laboratories.
In short, GrandAudition MK2, with its clearly arranged features and ease of use, offers comfortable loudspeaker routing with professional sound neutrality.
Product type
Switches
Type
Analog
Signal processing
Analog
Ethernet Functions
Yes
Inputs
2 x balanced
Outputs
24 + 2 balanced
Controls Front panel
1 x Encoder pushbutton , 24 x pushbutton
Display elements front side
2 x signal source LED (XLR / Player , Dual-color signal/clip LED , LED ring for main/channel volume with 0dB and mute LED indicator
Front Panel connectores
2 x XLR 3 pin female , 24 x male XLR socket
Controls Element Back Panel
mains voltage selector , Power On/Off , reset
Connections rear side
2 x XLR , 2 x XLR 3 pin female , 3-pole IEC mains connection (mains socket) , Micro-USB for service purposes , RJ45 (Ethernet) , USB stick
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Fuse
T 630 mA 250V
Power consumption
65 W
Ambient temperature ( in operation )
0 - 40 °C
Installation Height
19\" / 2 U
Dimensions (W x H x D)
482,6 x 89,4 x 282,3 mm
Housing material
Metal
Cabinet surface
Powder-coated
Weight
5,7 kg
|
Features: Eight channel / four way split per channel Channels linkable up to 1 in, 32 out Ultra low noise design 'SilentSwitch' Phantom Power switching ?20 dB pad switch 0 to +40 dB Gain available via rear switches Headphone monitoring and PFL metering Electronically Balanced Inputs and Outputs (standard) Transformer balanced Outputs option Intuitive, 'user friendly' layout Flawless audio performance
EC-2 Superb Audio Quality Active microphone and line signal splitting has a number of benefits over using passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI. About the MSX 32 With these benefits in mind, the ARX MSX 32 Active Microphone/Line Splitter has been developed to deliver the performance required by the increasing complexity of today?s standards of audio production. The MSX 32 consists of eight channels of actively buffered ultra low noise Microphone/Line Splitter. Each of these channels has four electronically Balanced splits ? two outputs on the rear panel for Main and Monitor, plus two more output splits on the front panel. All splits have the option of transformer balancing if so specified.Each channel has a ?20 dB pad switch plus silently switchable 48V Phantom power with indicator LED. A PFL switch and 6 LED metering enables each channel to be easily checked with headphones for signal monitoring, and also for line tracing when troubleshooting. Gain through the MSX 32 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB stepsA ?Link? switch links each channel to the previous one, providing an ultimate maximum of 32 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted. Number stickers are provided to give each channel an individual number for up to 40 channels when multiple MSX32s are being used.Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout. Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1 as required. Internal Power Supply The MSX 32?s internal toroidal transformer based power supply is triple shielded to get the maximum benefit from the ultra low noise design of the splitter circuitry. An illuminated power switch on the front panel provides visual confirmation of AC power connection to the unit.The headphone output and the 6 LED PFL metering are both mounted on the right hand side of the front panel. Rear panel connectors enable this function to be linked when using multiple MSX 32 units. To sum up, this feature packed two RU device is the answer wherever transparent signal buffering and routing is required.
T E C H N I C A L S P E C I F I C A T I O N S Signal / Noise Ratio -94dB Distortion .008% 20Hz - 20KHz Gain through unit Switchable 0, +10, +20, +30, +40 dB Maximum Output +24dB Pad Switch ?20dB attenuation Phantom Power +48VDC slow turn on/turn off Output Impedance 100 Ohms Electronically Balanced (Optional Transformer balancing available) Clip LED 1dB before clipping Headphone Output 2 watts/8 ohms AC Mains Input Fused IEC socket AC Power 100-120V AC 2 amp 220-240V AC 1 amp Transformer Type Low noise shielded toroidal Size 2 RU - 19?W x 3½?H x 8?D, 482 x 89 x 200 mm Weight E model - 15 lbs (7 Kg) | The MX225 is designed for remote volume control of multiple amplifiers or powered speakers in a distributed audio system. Two stereo sources are available to each of five output zones. Each source input pair handles separate left and right balanced line level signals. Each output zone features independent level control from inputs 1 and 2, stereo/mono selector with mono indicator, LED level metering, and left and right balanced line level zone outputs. All audio connections are balanced XLR. The built in power supply and single high 19″ rack mount format allows for easy installation and reliable operation.
- 5 Zone mixer / distributor
- Adjusts volume of multiple amplifiers or active monitors separately
- Stereo/mono switch + clip and 5 segment LED on each zone
- Connectors: 4x line in XLR (2x L/R), 10x XLR Out (5x L/R)
- Dimensions: 482 x 152 x 44.5 mm (19"/1U)
- Weight: 2.4 kg
XLR-F balanced (x4) |
XLR-M balanced (x10) |
47k Ω |
200 Ω |
.05% Typical |
> 90dB typical |
+20dBu |
+24dBu balanced |
+6DB |
USA – 105 to 125 VAC / 50-60Hz, 15 W typical |
1.75″H x 19″W x 7.25.0″D (44.5mm x 483mm x 184mm) |
5.34 lbs (2.42 kg) |
|
- With improved 192 kHz sample rate for the best sound reproduction.
- Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) audio signals.
- Supports compressed 2-channel and multi-channel Dolby Digital and DTS audio signals.
- Ideal for presentation or distribution to another room.
- The optical (Toslink) digital audio splitter can split a single optical digital input to four outputs without delay or loss of quality.
- Supports the S/PDIF and Toslink standard.
Your TV has 1 Toslink output, but you use 4 amplifiers. This requires the Toslink cable to be split from 1 into 4. An additional amplifier could be, for example, a surround set, a sound bar of an amplifier in the kitchen
Connections
|
|
Audio input |
1 x Toslink (optical) |
Audio output |
4 x Toslink (optical) |
Audio
|
|
Supported audio |
PCM2, Dolby Digital 5.1 and DTS |
Sample rate |
32 kHz to 192 kHz |
General
|
|
Dimensions (h x w x d) |
24 x 46 x 46 mm |
Weight |
22 grams |
Ambient temperature |
+0 to +40 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
iEQ-15 Dual 15-Band Graphic EQ with Type V? NR and AFS?
With an EQ heritage that has produced countless industry standard
patents and dates back more than 30 years, the dbx iEQ-31 easily
lives up to the dbx legacy of uncompromised sonic integrity. In
addition to unsurpassed equalization specs, the iEQ-15 also offers
the built-in necessities which include AFS? feedback Suppression,
Type V? noise reduction and PeakStopPlus? limiting. Besides
including two 15-band channels of 2/3-octave equalization, the iEQ-15
also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut
range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs,
nonconductive nylon sliders; and an intuitive user interface with comprehensive
output and gain reduction metering. As always, the inevitable result of our
meticulous attention to detail and top-quality componentry is exceptional
sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of EQs.
The iEQ series is now able to offer state-of-the-art digital EQ performance
and specs with an analog look and feel. From its amazing 10Hz to 22kHz
frequency response, to its 113dB dynamic range and Advanced Feedback
Suppression (AFS?), dbx proprietary Type V? noise reduction
and PeakStopPlus? limiting, the iEQ-15 offers out of this world specifications
with a downto- earth price point. Sure to find a home in the studio, on tour and
with installed sound venues, the iEQ-15 is destined to take its rightful place in
the lineage of great dbx? signal processors that are the professional?s choice
in signal processing. With such pristine design and quality, the iEQ-15 offers
the maximum sonic flexibility in a straight forward interface and rock-solid construction.
? Advanced Feedback Suppression (AFS?)
? Type V? Noise Reduction
? PeakStopPlus? Limiting
? 2/3-octave Constant Q frequency bands
? Switchable boost/cut ranges of ±6 or ±15dB
? 18 dB per octave 40Hz low-cut filter
? ±12dB input gain range
? XLR, TRS and Euroblock Inputs and Outputs
? Internal Toroidal Transformer
? Frequency Response of 10Hz to 22kHz
? Dynamic range of greater than 113dB
? User Power Up Features
? Relay Bypass for Power Failure System Protection
|
Signal distributor. 1 stereo input / 4 stereo outputs or 1 mono input / 8 mono outputs
This audio distributor is very useful to supply several audio devices with only one audio source. Its 2 operating modes allow to work with mono or stereo signals. Output level can be controlled independently.
WD 421 adapts itself to work with different impedances, ensuring that output signal level is at least equal to input signal level. It avoids any undesired attenuation and features a LED vumeter to visualize the input signal level.
Audio signal distributor with 2 inputs and 8 outputs. Two operating modes: 1 stereo input with 4 stereo outputs. 1 mono input with 8 mono outputs. Adjusting Output level. Balanced LINK output for interconnecting several units. Individual gain control of each channel
Inputs: 2 x XLR3 female balanced. Outputs: 8 x XLR3 male balanced. Input sensitivity: 0 dBu. Max. level input: 22 dBu. Input impedance: 10 kohm. Level range: ? to - 12dBu. Frequency response: 20 Hz to 22 kHz. Distortion: 110 dBu. Noise and hum: < - 80 dB @ 20 Hz - 22 kHz. Crosstalk: < - 80 dB @ 20 Hz - 22 kHz. Output impedance: 120ohm. Main supply: 110 - 120 V / 220 - 240 V 50/60 Hz. Power consumption: 20 W. Dimensions (WxHxD): 483 x 44 x 220 mm. Weight: 2.75 kg. |
Reviews
There are no reviews yet.