| Content |
- Wide range of authentic tube amplifier tones
- Selectable amplifier styles, gain structure and mic position emulation
- Master drive, level, bass and treble controls
- Superior signal-to-noise ratio
- Ideal for direct recording
- Doubles as distortion pedal, practice amp and DI box
- Pure analog device
In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2\'s hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.
Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Product type
Guitar Amplifiers
Technology
solid state
Power
n.a. W
Inputs
1
Input connectors
6.3 mm jack
Input impedance
1 M Ohm(s)
Outputs
3
Output connectors
3.5 mm jack , 6.3 mm jack , XLR
Output impedance
510 Ohm(s)
Channels
1
Indicators
on/off
Controls
amp select , Bass , Drive , Gain , ground lift , level , mic position , Mode , Treble
FX loop
no
Operating voltage
9 V block , 9 V DC power supply
Cabinet material
die-cast aluminium
Width
100 mm
Depth
100 mm
Height
55 mm
Weight
0,36 kg |
- Experience true analog delay and vintage slap-back echo that rivals any tape delay
- This BEHRINGER product has been designed to compete head to head with leading products on the market
- Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
- Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
- Blue status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- First-class electronic On/Off switch for highest signal integrity in bypass mode
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Analog at its Finest
Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command.
Easy to Operate
The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode. You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included).
Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay... |
The new V847 Wah-Wah pedal is an enhanced version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the new Wah-Wah offers guitarists the same legendary tone with the addition of AC power capability and a buffered input jack for preserving the unprocessed guitar tone when the pedal is not engaged. The pedalʼs inductor has undergone a redesign to be closer in specification to the original VOX wah inductors, for improved dynamics and tone. These additions will benefit players of all genres who use a wah pedal as an integral part of their sound.
About the Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V847 Wah-Wah Specificaitons - Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest postion)
- Weight: 1673g (including battery)
- Included Accessories: Vinyl carry bag
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
| Input Impedance | 1 M ohms |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -93 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 22 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Option | AC Adaptor (PSA-Series) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.
- Compact chorus pedal especially designed for bass guitar
- Applies chorus sound to the high frequencies without altering low frequencies
- Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
- BOSS 5-year warranty
|
Reviews
There are no reviews yet.