PALMER PLI03 Pro PLI 03 Line Isolation Box 2 Channel RCA Unbalance

97.48 incl. GR VAT

Available on backorder

EAN: 4049521049323
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: PLI03 Category:
Two-channel isolation transformer (line isolator). With cinch (RCA) inputs and outputs, especially designed for connection to notebooks, sound cards, hifi systems, etc. The PLI03 eliminates ground loops and interference signals that can be caused by the computer, for example. Product type Line Isolators Channels 2 Inputs 2 Input connectors 2 x RCA Input type Unbalanced […]

 

Read more

Two-channel isolation transformer (line isolator). With cinch (RCA) inputs and outputs, especially designed for connection to notebooks, sound cards, hifi systems, etc. The PLI03 eliminates ground loops and interference signals that can be caused by the computer, for example.
Product type
Line Isolators
Channels
2
Inputs
2
Input connectors
2 x RCA
Input type
Unbalanced
Input impedance
10 k Ohm(s)
Max. input level
+ 6 dBu
Outputs
2
Output connectors
RCA
Output type
Unbalanced
Output impedance
10 k Ohm(s)
Max. output level
+ 6 dBu
Transformer balanced
transformer isolated
Ratio
1:1
Frequency response
20 – 20.000 Hz
Controls
Ground lift switch
Cabinet material
sheet steel
Cabinet surface
Powder coated
Width
145 mm
Depth
65 mm
Height
45 mm
Weight
0,57 kg

 

 

 

Weight 0.8 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER PLI03 Pro PLI 03 Line Isolation Box 2 Channel RCA Unbalance”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER PLI03 Pro PLI 03 Line Isolation Box 2 Channel RCA Unbalance removeBSS AR-133 ACTIVE DI BOX (Battery/ Phantom Powered) removeBEHRINGER DI400P High-Performance Passive Direct Injection Box removeALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT removeOMNITRONIC LH-060 2-channel DI box/splitter, passive removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom remove
NamePALMER PLI03 Pro PLI 03 Line Isolation Box 2 Channel RCA Unbalance removeBSS AR-133 ACTIVE DI BOX (Battery/ Phantom Powered) removeBEHRINGER DI400P High-Performance Passive Direct Injection Box removeALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT removeOMNITRONIC LH-060 2-channel DI box/splitter, passive removeBEHRINGER DI100 Ultra DI Box Active Battery/Phantom remove
ImageBEHRINGER DI100 Ultra-Rugged DI Box for Stage and Studio Powered active battery phantom
SKUPLI03AR-133E005867SM-50LH060E005264
Rating
Price 97.48 incl. GR VAT 159.00 incl. GR VAT 33.00 incl. GR VAT 119.04 incl. GR VAT 73.35 incl. GR VAT 46.00 incl. GR VAT
Stock

Available on backorder

Only 5 left in stock (can be backordered)

In stock

In stock

Available on backorder

In stock (can be backordered)

AvailabilityAvailable on backorderOnly 5 left in stock (can be backordered)In stockIn stockAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
ContentTwo-channel isolation transformer (line isolator). With cinch (RCA) inputs and outputs, especially designed for connection to notebooks, sound cards, hifi systems, etc. The PLI03 eliminates ground loops and interference signals that can be caused by the computer, for example.
Product type
Line Isolators
Channels
2
Inputs
2
Input connectors
2 x RCA
Input type
Unbalanced
Input impedance
10 k Ohm(s)
Max. input level
+ 6 dBu
Outputs
2
Output connectors
RCA
Output type
Unbalanced
Output impedance
10 k Ohm(s)
Max. output level
+ 6 dBu
Transformer balanced
transformer isolated
Ratio
1:1
Frequency response
20 - 20.000 Hz
Controls
Ground lift switch
Cabinet material
sheet steel
Cabinet surface
Powder coated
Width
145 mm
Depth
65 mm
Height
45 mm
Weight
0,57 kg
     
With added functionality and enhanced audio performance, the AR-133 has been designed to be more affordable for musicians, studios and PA companies. The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use. The unit is housed in a rugged aluminium extrusion case, with robust polyurethane end-cheeks which give the AR-133 a very distinctive look. Input connectors are both 1/4" jack sockets and an XLR socket, the latter meaning that the AR-133 can be used to convert unbalanced signals to a balanced output on XLRs throughout. The arched case allows cables to run back underneath the unit from the end for neat cable management. Input attenuation is 0, -20 or -40dB, making the box suitable for instrument, line or amplifier levels on inputs. On the output side, a ground-lift switch is provided for quick solutions to ground-loop problems. The AR-133 uses an enhanced version of the same audio path as the AR-116, now regarded by many people as a reference standard. The sound quality is legendary, particularly on acoustic and bass guitars. Numerous applications can be satisfied by the AR-133. For example, as well as the traditional guitar use, the AR-133 can be used with keyboards, DJ consoles, amplifier outputs, and other electronic sources.An additional bonus is the ability to use the AR-133 as an active balancing device. Input Section Input Impedance  1M Ohm (pad at 0dB) 47k Ohm (pad at -20dB) 47k Ohm (pad at -40dB) Max Input Level +9dBu (pad at 0dB) +29dBu (pad at -20dB) +49dBu (pad at -40dB) Connectors  Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced) Jack:  Tip Hot (+ve) Sleeve Ground XLR: Pin 2 Hot (+ve) Pin 1 & 3 Ground Output Section Output Transformer Balanced Max. Output Level  +8dBu into 600 Ohms or greater Connector  XLR3-32 or equivalent System Performance Distortion (THD)  < 0.005% at 1khz, 0dbu output Noise  < -105db unweighted, 22hz-22khz, rms* Frequency Response 30Hz to 20kHz, +0dB/-1dB General Main/Standby battery 9 volt PP3 type, preferably alkaline. Current drain  on phantom - less than 7.5mA on battery - less than 2mA. Phantom Power  +20 volts DC to +48 volts DC Weight 650 gms, excluding batteries. Overall Dimensions  59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6“)Behringer DI-400P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage.

The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
electric bass, and electronic music instruments with mixing desks of PA systems
and of recording studios.
The SM-50 reduces the amount of microphones used on stage, thus improving gain
before feedback.
Coloration of sound is avoided. Clean signal without interference from other instruments
eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
trouble-free function for a number of years even under adverse conditions. Double grounding
(hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
The box thus complies with toughest safety standards.

Technical Data

input impedance 20 kOhm
input impedance, instrument input impedance, line-In input impedance, speaker output impedance 200 Ohm
frequency response 30 ... 20000 Hz, ± 1 dB
THD isolation voltage tranformer pri/sec 2500 V
                        outpur to ground 1500 V
inputs 1/4" phone jacks, unbalanced
outputs XLR, balanced, microphone level.
           pin 1 = ground, pin 2 = hot, pin 3 = cold
case aluminium die-cast
weight 230 g
dimensions113 x 71 x 37 mm
 

2-channel DI box/splitter, passive Converts 2 separate unbalanced line inputs (e.g. instruments) into 2 balanced XLR outputs for connecting a mixer Switchable to split mode (input 1 routes the signal to both outputs) Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 2 signal inputs via XLR/jack combo connectors 2 low-impedance XLR outputs Modern convex housing design Full rubber housing corners for safe operation Cables can be routed under the housing

Product Features: Professional and multi-purpose direct injection box for stage and studio applications Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer Internal battery automatically shuts off when phantom power is applied Allows direct connection to speaker outputs with up to 3,000 Watts Switchable input attenuation allows input levels of up to +50 dB Ground Lift switch eliminates typical ground loop problems ¼" TRS and gold-plated XLR connectors Ultra-rugged, road-suitable aluminum case Stackable oversized rubber corners High-quality components and exceptionally rugged construction ensure long life and durability Conceived and designed by BEHRINGER Germany   With the DI100, you can rest assured that your sound source will reach the console balanced and noise-free. BEHRINGER's take on the all-important active DI box gives you functionality, durability and incredible sound at a remarkable price.
Be Direct
Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" LINK jack to send your signal to an on-stage amplifier. The DI100 also has a switchable attenuation pad, allowing input levels of up to +50 dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features BEHRINGER's renowned OT-1 output transformer.
Superior Sound, Incredible Value
DI boxes are an essential part of any stage or studio, and the DI100 delivers the exceptional sound you expect, wrapped up in a rugged, road-proof aluminum case with stackable rubber corners.
Weight0.8 kg0.65 kg0.20 kg0.23 kg0.70 kg0.65 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.8 kg
Weight 0.65 kg
Weight 0.20 kg
Weight 0.23 kg
Weight 0.70 kg
Weight 0.65 kg